2010 OPEL COMBO light

61
Seats, Interior
Use of child restraint systems
3
Picture no: 15888s.tif
Cigarette lighter
3
The cigarette lighter is in the centre
console.
With the ignition on, press in the cigarette
lighter. It switches off automatically when
element is hot. Pull out the cigarette lighter.
Picture no: 13738s.tif
Accessory socket
3
The accessory socket is in the centre
console.
The accessory socket or cigarette lighter
socket can be used to connect electrical
accessories.
The socket is operational when the ignition
is switched on. Use of the socket discharges
the battery if the engine is not running.
9 Warning
No child restraint system 3 may be
installed on front passenger seat.
Danger to life.
Child restraint systems must only be
installed on the seats of the rear row 3.
O n v e r s i o n s w i t h o u t r e a r r o w o f s e a t s , n o
child restraint system may be installed
on the front passenger seat.
Caution
Do not damage the sockets by using
unsuitable plugs.

64 Seats, Interior
Picture no: 11699s.tif
Stowage compartment 3 beneath
passenger seat
Lift stowage compartment by grasping the
recessed edge and pull it out. Maximum
load: 1 kg. To close the stowage
compartment, push it in and engage.
Picture no: 18102s.tif
Stowage compartment in roof above the
front seats and side mesh pockets above
the sliding doors 3
The stowage compartment above the front
seats can hold a maximum load of 15 kg.
The mesh packets above the doors can
only hold light objects.
Extendable stowage trays
3
The extendable stowage trays are located
in the front seat backrests.
To unfold, pull upwards until it engages.
To fold away, press downwards past the
resistance.
Do not play heavy objects on the tray.
9 Warning
Secure objects to prevent them from
falling out and causing injury.

66 InstrumentsInstrumentsControl indicators ................................ 66
Instrument display ............................... 71
Information display ............................. 76
Warning buzzers.................................. 82
Windscreen wipers ............................... 82
Picture no: 18529s.tif
Control indicators The control indicators described here are
not present in all vehicles. The description
applies to all instrument versions.
The colours of the control indicators mean: >

Fog lamps 3
Control indicator lights up green
Illuminates when the fog lamps are on
386.
Picture no:
A

Engine electronics, transmission
electronics 3, immobiliser, diesel fuel
filter3
Control indicator lights up and/or flashes
yellow
It illuminates for a few seconds when the
ignition is switched on.
Illuminates when the engine is running
Fault in engine electronics or transmission
electronics. Electronics switch to
emergency running programme, fuel
consumption may increase and driveability
of vehicle may be impaired 3116. If the
fault is not remedied by re-starting,
contact a workshop for assistance
immediately.
In vehicles with diesel engines, it may be
necessary to drain the diesel fuel filter
3177. zRed
Danger, important reminder,
zYellow
Warning, information, fault,
zGreen
Switch-on confirmation,
zBlue
Switch-on confirmation.

67
Instruments
Picture no: 18529s.tif
Flashes when the ignition is onFault in the electronic immobiliser system;
the engine cannot be started 321.Z

Exhaust emission
Control indicator lights up and/or flashes
yellow
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
Fault in emission control system. The
permissible emission limits may be
exceeded. Contact a workshop for
assistance immediately.
Picture no:
If it flashes when the engine is running:Fault that could lead to catalytic converter
damage. Ease up on the throttle until the
flashing stops 3115. Seek the immediate
assistance of a workshop. v
Airbag systems 3, Belt tensioners
Control indicator lights up red
Illuminates when the engine is runningFault in the airbag or belt tensioner system
350, 359.
I

Engine oil pressure
Control indicator lights up red
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
1. Depress clutch 3.
2. Set manual transmission to neutral, or
with manual transmission automated 3
place selector lever in N.
3. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
4. Switch off ignition.
Contact a workshop for assistance. Caution
Engine lubrication may be interrupted.
This may result in damage to the engine
and/or locking of the drive wheels.
9 Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has
come to a standstill, otherwise the
steering column lock could engage
unexpectedly.

68 InstrumentsO

Turn signal lamps
Control indicator flashes green.
The control indicator flashes if a turn signal
or the hazard warning flashers are
activated.
Rapid flashing: lamp or associated fuse
has failed.
Replacing bulbs 3151. Fuses 3145.
C

Main beam
Control indicator lights up blue.
It is illuminated when main beam is on and
during headlamp flash 385.
Picture no: 18529s.tif
!

Preheating3, diesel particle filter 3
Control indicator lights up and/or flashes
yellow
Illuminated
Preheating activated. Only activates when
outside temperatures are low.
Flashes

(in vehicles with diesel particle filter)
Control indicator ! flashes if the filter
requires cleaning and previous driving
conditions did not permit automatic
cleaning. Continue driving and if possible
do not allow engine speed to drop below
2000 rpm.
Picture no:
The control indicator ! goes off as soon
as the self-cleaning operation is complete.
Diesel particle filter 3116.T
Winter programme of the manual
transmission automated3
Symbol is lit in the transmission display if
the Winter programme is activated 3103.

69
Instruments
r
Fog tail lamp
Control indicator lights up yellow.
Illuminates when the fog tail lamp is on
386. p

Alternator
Control indicator lights up red
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
Stop and turn engine off. battery is not
charged. Engine cooling may be
interrupted. Contact a workshop.
R

Brake system, clutch system 3
Control indicator lights up or flashes red.
Illuminated
Illuminates when the ignition is switched on
if the hand brake is applied 3120.
Illuminates when the hand brake is
released if the fluid level for the brake or
clutch system 3 is low 3179.
FlashesOn vehicles with manual transmission
automated 3, control indicatorR flashes
for a few seconds after the ignition is
switched off if the hand brake has not been
applied.
u

Anti-lock Braking System 3
Control indicator lights up red
Illuminates while driving
Fault in the anti-lock braking system 3119.
9 Warning
Stop. Do not continue your journey.
Consult a workshop.

70 Instruments
Picture no: 18529s.tif
S

Engine oil level 3
Control indicator lights up yellow.
The engine oil level is checked
automatically.
Illuminates when the engine is running
Engine oil level too low. Check engine oil
level and top up engine oil if necessary
3175.
Picture no:
EPS
1)
Electric power steering 3
Control indicator lights up yellow.
Fault in the electric power steering. It is still
possible to drive. Although it is still possible
to steer the vehicle, it is significantly more
difficult. Contact a workshop for
assistance.
1)EPS
= Electric
Power
Steering.
Y
Fuel level 3
Control indicator lights up and/or flashes
yellow
Lamps

Level in fuel tank too low.
Flashes
Fuel level is used up, fuel immediately.
Never let the tank run dry!
Erratic fuel supply can cause the catalytic
converter to overheat 3114.
Diesel engines: Bleed the fuel system if the
fuel tank is allowed to run dry 3128.

72 Instruments
Picture no: 12099s.tif.
Time display in odometer 3
To switch between trip odometer and time
display 3 give reset knob a short press.
When the vehicle lights are on, the
brightness of the display can be adjusted
using the right-hand adjuster wheel k
below the light switch 387. Setting the time
On the clock display, press the setting knob
on the instrument for approx. 2 seconds.
The flashing value is set by pressing briefly.
Press for about 2 seconds again to switch
to the next setting and at the end to exit
setting mode.