2010 NISSAN ALTIMA HYBRID Navigation Manual

3. A confirmation message is displayed. Se-
lect “Yes”.
The destination and the waypoints are
deleted.
INFO:
The deleted destination and waypoints are not
able to be reactivated.
Voice command
1. Press
on the steering wheel switch.
2. After the tone sounds, speak a command.
To delete a destination and all waypoints:
“Delete Destination” (Alternate Command
Mode)
NDE0079
4-34Setting a destination

5 Route guidance
Procedures after setting a destination................5-2
Available items after setting a destination..........5-2
Starting route guidance.........................5-3
Selecting a route...............................5-3
Confirming a route..............................5-4
Adding a destination or waypoint.................5-5
Moving location of destination....................5-6
Storing location................................5-7
Viewing information about searched location.......5-7
About route guidance..............................5-8
Voice guidance during route guidance............5-8
Guidance screens and preview mode.............5-9
Guidance screen settings......................5-10
Route screen . . ..................................5-16
Basic operation...............................5-16Deleting/reactivating a route....................5-17
Editing a route................................5-18
Confirming a route.............................5-25
Guidance settings.............................5-28
Recalculate route..............................5-29
Setting a detour route..........................5-31
Searching for a detour route taking traffic
information into consideration...................5-32
Setting conditions for the route calculation.......5-33
Route guidance settings...........................5-36
Basic operation...............................5-36
Setting voice guidance at intersections..........5-37
Displaying small turn arrow on map..............5-38
Switching estimated arrival time display..........5-39
Set average speeds...........................5-40

After performing a route search, the route guid-
ance can be started immediately. Also, it is pos-
sible to confirm or change a route.
AVAILABLE ITEMS AFTER SETTING
A DESTINATION
●“Start”:
Starts route guidance to the selected
destination.
“STARTING ROUTE GUIDANCE”
(page 2-18)
●“More Routes”:
Displays 3 alternative routes.
“SELECTING A ROUTE”
(page 5-3)
●“Add/Route Info”:
Displays the route information.
“CONFIRMING A ROUTE”
(page 5-4)●“Move Location”:
Displays a map screen and allows the location
of the destination to be adjusted.
“MOVING LOCATION OF DESTI-
NATION” (page 5-6)
●“Store Location”:
Stores the location in the Address Book.
“STORING LOCATION”
(page 5-7)
●“Place Info”:
Displays information about the facility that is
set as the destination, if it is included in the
map data.
“VIEWING INFORMATION
ABOUT SEARCHED LOCATION”
(page 5-7)
INFO:
●If no operations are performed on the system
for several seconds, “Start” is automatically
selected, and the system starts route
guidance.
●When using waypoints, “More Routes” is
disabled. After the route is started, select
ROUTE then “Edit/Add to Route” to change
the route between each waypoint.
“EDITING A ROUTE” (page 5-18)
NRG0001
PROCEDURES AFTER SETTING A
DESTINATION
5-2Route guidance

●Even if the map screen is touched, the same
map screen as when “Move Location” is se-
lected is displayed.
STARTING ROUTE GUIDANCE
1. Select “Start”. Route guidance starts.
SELECTING A ROUTE
1. Select “More Routes”.
2. Select the preferred route condition.
3. Press BACK to return to the previous
screen.
Available route conditions
●“Short. Time” (purple):
Prioritizes by the shortest time.
●“Min. Freeway” (orange):
Minimizes the use of freeways.
●“Short. Dist.” (green):
Prioritizes by the shortest distance.
LNV0744NRG0002
Route guidance5-3

INFO:
●After a route is selected, a preview is dis-
played on the right side of the screen.
●The 3 routes may not always be different.
CONFIRMING A ROUTE
1. Select “Add/Route Info”.
2. Select the preferred information item.
3. Press BACK to return to the previous
screen.
Available information
●“Turn List”:
Displays the details of the suggested route.
“Using turn list” (page 5-27)
●“Preview”:
The system will trace the planned route going
forward or in reverse.
“Using route preview” (page 5-27)
●“Add Way Pt.”:
Edit the route by adding a destination or
waypoint.
“ADDING A DESTINATION OR
WAYPOINT” (page 5-5)
NRG0004NRG0005
5-4Route guidance

●“Store Route”:
A calculated route can be stored. A maximum
of 5 routes can be stored. Stored routes can
be easily retrieved and set as the suggested
route.
“STORING A ROUTE” (page 6-7)
●“Map Scroll”:
Displays a map screen where the location of
the destination can be confirmed. Even if the
map screen is touched, the same map screen
as when “Map Scroll” is selected is displayed.
ADDING A DESTINATION OR
WAYPOINT
Before starting route guidance, destinations
and/or waypoints can be added. A total of 6 des-
tinations or waypoints can be set.1. Select “Add Way Pt.”. 2. Set additional destinations or waypoints.
The method of searching for a location is
the same as the one for a destination.
“Setting a destination”
(page 2-17)
NRG0006NRG0007
Route guidance5-5

3. Select “Add Destination” or “Add
Waypoint”.4. The system starts calculating a route that in-
cludes the added destination or waypoint.
When the calculation is finished, the route is
displayed.
INFO:
●If a waypoint was added, “More Routes” can-
not be selected.
●If a destination was added, the prior destina-
tion becomes a waypoint.
MOVING LOCATION OF DESTINA-
TION
The location of the destination can be adjusted
by moving the cross pointer across the map.1. Set the destination using an appropriate
method.
2. Select “Move Location”.
NRG0008NRG0009NRG0085
5-6Route guidance

3. Adjust the location by moving the cross
pointer across the map. The location of the
destination is modified.
INFO:
●The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
●The map scale can be changed by pressing
ZOOM IN or ZOOM OUT. The map scale can
also be changed by touching the scale icon.
●Even if the map screen is touched, the same
map screen as when “Move Location” is se-
lected is displayed.
STORING LOCATION
A searched location can be stored in the Ad-
dress Book. Then it can be easily retrieved and
set as a destination (or waypoint) .1. Set the destination using an appropriate
method.
2. Select “Store Location”.3. The location is stored in the Address Book.
The corresponding icon is displayed at the
set location on the map.
VIEWING INFORMATION ABOUT
SEARCHED LOCATION
Information (street address and phone number)
about places stored in the map data can be
displayed.
NRG0086NRG0087NRG0088
Route guidance5-7