2010 MITSUBISHI LANCER SPORTBACK towing capacity

3-2 Features and controls
3Break-in recommendations
N00508700314
Advanced automobile manufacturing techniques permit you to
operate your new vehicle without requiring a long break-in
period of low-speed driving.
However, you can add to the future performance and economy
of your vehicle by observing the following precautions during
the first 300 miles (500 km).
Drive your vehicle at moderate speeds during the break-in
period.

Avoid revving the engine. For vehicles equipped with tur-
bocharger, do not exceed 5,000 rpm for the first 600 miles
(1,000 km).


Avoid rough driving such as fast starts, sudden accelera-
tion, prolonged high-speed driving and sudden braking.
These would have a detrimental effect on the engine and
also cause increased fuel and oil consumption, which
could result in malfunction of the engine components. Be
particularly careful to avoid full acceleration while in low
gear.


Do not overload the vehicle. Observe the seating capacity
(See “Cargo load precautions” on page 4-12).


Do not use this vehicle for trailer towing.
Keys
N00508800504
Ty p e 1Two keys are provided. The keys fit all locks.
Keep one in a safe place as a spare key.1- Key for the electronic immobilizer and keyless entry system
2- Key number plate
BK0103001US.book 2 ページ ２００９年８月２０日　木曜日　午前１０時４５分

4-10 Driving safety
4
Steps for Determining Correct Load Limit
N00630200182
1. Locate the statement “The combined weight of occu-
pants and cargo should never exceed XXX kg or XXX
lbs.” on your vehicle’s placard.
2. Determine the combined weight of the driver and pas-
sengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passen-
gers from XXX kg or XXX lbs.
4. The resulting figure equals the available amount of
cargo and luggage load capacity. For example, if the
“XXX” amount equals 1400 lbs. and there will be five
150 lbs. passengers in your vehicle, the amount of
available cargo and luggage load capacity is 650 lbs.
(1400 - 750 (5 x 150) = 650 lbs.)
5. Determine the combined weight of luggage and cargo
being loaded on the vehicle. That weight may not
safely exceed the available cargo and luggage load
capacity calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your
trailer will be transferred to your vehicle. Consult this
manual to determine how this reduces the available
cargo and luggage load capacity of your vehicle.NOTE

The above steps for determining correct load limit were
written in accordance with U.S.A. regulations.
Your vehicle cannot tow a trailer, so step 6 is irrelevant.
BK0103001US.book 10 ページ ２００９年８月２０日　木曜日　午前１０時４５分

Alphabetical index
7
Size (tire and wheel) 9-9
Snow tires 7-38
Tire and loading information placard 4-8
,9-4
Tire chains 7-38
Tread wear indicators 7-35
Tissue holder 3-287
Tools 6-7
Storage 6-7
Towing 6-18
Trailer towing 4-15
Turbocharger operation 3-89
Turn signal lights
Bulb capacity 7-58
Indicators 3-214
Lever 3-228
Replacement 7-73
Twin Clutch SST
Fluid 7-18
,9-10
Gearshift lever operation 3-104
Gearshift lever position display 3-106
Manual shift 3-115
Manual shift display 3-120
Twin Clutch SST control mode display 3-114
Twin Clutch SST control mode switch 3-113
Warning display 3-108
Twin Clutch SST (Sportronic Shift Transmission) 3-104
V
Vanity mirror 3-274Vehicle care precautions 7-92
Vehicle dimensions 9-6
Vehicle labeling 9-2
Vehicle preparation before driving 4-3
Vehicle weights 9-7
Vents 5-2
W
Warning lights 3-214
Washer
Fluid 7-21
,9-10
Rear window washer 3-238
Switch 3-237
Waxing 7-96
Weights 9-7
Wheel
Specification 9-9
Wiper
Rear window wiper 3-238
Switch 3-231
Wiper blades 7-41
BK0103001US.book 7 ページ ２００９年８月２０日　木曜日　午前１０時４５分