WARNING
l Mount the spare wheel with the valve
stem (F) facing outboard. If you cannot
see the valve stem (F), you have installed
the wheel backwards.
Operating the vehicle with the spare
wheel installed backwards can cause vehi-
cle damage and result in an accident. 11. Finger-tighten
the wheel nuts. (Turn them
clockwise.)
Vehicle with steel wheels
Tighten
the wheel nuts until the tapered
parts of the wheel nuts make light contact
with the seats of the wheel holes and the
wheel is not loose.
Tighten the wheel nuts in the same way
with a compact spare wheel.
Vehicle with aluminium wheels
With
a normal wheel, tighten the wheel
nuts until the flanges of the wheel nuts
touch the wheel and the wheel is not loose.
Normal wheel With a compact spare wheel, tighten the
wheel
nuts until the tapered parts of the wheel nuts make light contact with the
seats
of the wheel holes and the wheel is
not loose.
Compact spare wheel CAUTION
l
Never
apply oil to either the wheel bolts
or the nuts, or they will tighten too much.
NOTE l Flange
nuts can be temporarily used on the
spare wheel, but return to the original wheel
and tyre as soon as possible.
l If all four aluminium wheels are changed to
steel wheels, use tapered nuts.
12. Lower the vehicle slowly and then tighten the nuts in the order shown in the illustration
until each nut has been tightened to the tor-
que listed here.
Tightening torque
88 to 108 N•m For emergencies
6-12
6
Presented by http://mmc-manuals.ru/ \251
Engine specifications
E01100601897Item Petrol-powered vehicles Diesel-powered vehicles
(Except for 1500 models) Diesel-powered vehicles
(for DPF models) Engine type
Four-cylinder, in line, water cooled
four-cycle, single overhead camshaft Four-cylinder, in line, water cooled four-cycle, double overhead camshaft with inter-
cooler and turbochargerEngine model
4G69BSY
BWCTotal displacement
2,378 cc
1,968 ccBore
87.0 mm 81.0 mmStroke
100.0 mm 95.5 mmCompression ratio
9.5 18.0Valve clearance Intake
0.20 mm (hot) AutomaticallyExhaust
0.30 mm (hot) AutomaticallyFiring order
1-3-4-2 1-3-4-2Maximum output (EEC net)
121 kW/6,000 r/min100 kW/4,000 r/min 103 kW/4,000 r/minMaximum torque (EEC net)
217 N•m/4,000 r/min 310 N•m/1,750 r/minSpecifications
9-08
9
Presented by http://mmc-manuals.ru/ \251
