2010 MITSUBISHI GRANDIS start stop button

Driving range
E00509400016
This
value shows the distance (in km or miles) that
can be driven on the fuel remaining in the fuel tank. NOTE
l If

the driving range drops below 50 km
(30 miles) while the driving range is dis-
played, the display shows “---”. When this oc-
curs, top up the fuel tank as soon as possible.
l The driving range varies depending on road
conditions, the manner of driving and other
related factors. Consequently, the display
should be used only as a guide. It is recom-
mended to add fuel as soon as the low fuel
warning lamp in the instrument cluster illumi-
nates.
(Refer to “Low fuel warning lamp” on page
3-04.)
l Refueling will update the driving range indi-
cation. l
The
driving range displayed is based on pre-
vious fuel consumption data. Disconnecting
the battery cable will result in the deletion of
existing fuel consumption data, which will af-
fect the unit’s calculations.
l The driving range figure can occasionally in-
crease if the vehicle is stopped on an incline.
This is because the fuel has moved in the
tank because of the incline and is not consid-
ered as a fault.
Average speed E00509500062
This value shows the average speed (in km/h or
mph) since the display was reset. Refer to

“To reset
the display” on page 3-13. l
Automatic reset mode
When

4 hours have passed after the ignition
switch is turned to the “OFF” or “ACC” posi-
tion, the display is automatically reset. It
then shows “---”. l
Manual reset mode
If

you reset the display at the time when you
want to start the measurements, average
speed from that point of time can be displayed.
To reset the display, push the “DISP” button
for about 5 seconds or more. NOTE
l While

the ignition switch is in the “ON” po-
sition, the automatic reset mode is permanent-
ly selected. If you wish to make continuous
measurements, select the manual mode. Instruments and controls
3-15 3
Presented by http://mmc-manuals.ru/ \251

6 M/T
Shift point Speed limit
1
st
gear 25 km/h (16 mph)2
nd
gear 40 km/h (25 mph) 3
rd
gear 65 km/h (40 mph) 4
th
gear 90 km/h (56 mph) 5
th
gear 115 km/h (71 mph) 6
th
gear 130 km/h (81 mph)Vehicles with A/T
Shift point Speed limit
1
st
gear 25 km/h (16 mph)2
nd
gear 75 km/h (46 mph) 3
rd
gear 115 km/h (71 mph) 4
th
gear 165 km/h (102 mph) Parking brake
E00600501474
To
park the vehicle, first bring it to a complete
stop, fully apply the parking brake lever sufficient-
ly to hold the vehicle.
To apply the parking brake 1- Firmly
depress and hold the brake pedal,
then pull the lever up without pushing the but-
ton at the end of hand grip. CAUTION
l
When
you intend to apply the parking
brake, firmly press the brake pedal to
bring the vehicle to a complete stop be-
fore pulling the parking brake lever. Pull-
ing the parking brake lever with the vehi-
cle moving could make the rear wheels
lock up, thereby making the vehicle unsta-
ble. It could also make the parking brake
malfunction. NOTE
l Apply

sufficient force to the parking brake
lever to hold the vehicle stationary after the
foot brake is released.
l If the parking brake does not hold the vehicle
stationary after the foot brake is released,
have your vehicle checked immediately.
To release the parking brake 1- Firmly
depress and hold the brake pedal,
then pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Lower the lever fully. CAUTION
l
Before
driving, be sure that the parking
brake is fully released and brake warning
lamp is off.
If a vehicle is driven without releasing the
parking brake, the brake will be overhea-
ted, resulting in ineffective braking and
possible brake failure. Starting and driving
4-04
4
Presented by http://mmc-manuals.ru/ \251

NOTE
l The
repeat mode will be cancelled by press-
ing the TRACK button (5), the SCAN button
(6) or CD eject button (1).
l With a disc that contains both CD-DA and
MP3 files, the repeat mode causes only files
of the same format (CD-DA only or MP3
files only) to be repeated.
To change the order of tracks for playback
Random playback for a disc (music CDs only)
Press the RPT/RDM button (14) briefly. “RDM”
will appear on the display. Tracks on the currently
selected disc will be played in a random sequence.
To exit the random mode, press the RPT/RDM but-
ton again.
Random playback for all folders on a disc (MP3
CDs only)
Press the RPT/RDM button (14) briefly. “RDM”
will appear on the display. Tracks in the currently
selected disc will be played in a random sequence.
To exit the random mode, press the RPT/RDM but-
ton again. NOTE
l The
random mode will be cancelled by press-
ing the SCAN button (6) or the CD eject but-
ton (1).
l With a disc that contains both CD-DA and
MP3 files, the random mode causes only
files of the same format (CDDA only or
MP3 files only) to be played in a random se-
quence.
To find the start of each track on a disc for playback
Press the SCAN button (6). “SCAN” will appear
on the display and the CD player will play back the
first 10 seconds of each track on the selected disc.
The track number will blink while the scan mode is
selected. To exit the scan mode, press the SCAN
button again.
NOTE l Once all tracks on the disc have been scan-
ned, playback of the disc will restart from the
beginning of the track that was playing when
scanning started.
l The scan mode will be cancelled by selecting
the RPT/RDM button (14), the TRACK but-
ton (5) or the CD eject button (1).
l With a disc that contains both CD-DA and
MP3 files, the scan mode causes only files of
the same format (CD-DA only or MP3 files
only) to be played.
To eject a disc
When the CD eject button (1) is pressed, the disc
automatically stops and is ejected. The system auto-
matically switches to radio mode. CD text and MP3 title display
E00725000298
This
CD player can display CD text and MP3 titles
including ID3 tag information.
CD text
The CD player can display disc and track titles for
discs encoded with disc and track title information.
Press the TEXT button (9) repeatedly to make se-
lections in the following sequence: disc name track name normal display mode.
Disc
name
Track name
Normal display mode NOTE
l The

display can show up to 10 characters. If
a disc name or track name has more than 10
characters, press the PAGE button (11) to
view the next 10 characters.
l When there is no title information to be dis-
played, the display shows “NO TITLE”. For pleasant driving
5-26
5
Presented by http://mmc-manuals.ru/ \251

l
Characters that the CD player cannot display
are shown as an asterisk.
MP3 title
The CD player can display folder and track titles
for discs encoded with folder and track informa-
tion. Press the TEXT button (9) for less than 1 sec-
ond repeatedly to make selections in the following
sequence: folder name track name normal
display mode. ID3 tag information
The

CD player can display ID3 tag information for
files that have been recorded with ID3 tag informa-
tion. 1. Press the TEXT button (9) for 2 seconds orlonger to switch to the ID3 tag information.
“TAG” indicator will appear on the display. 2. Then
press the DISP button for less than 1
second repeatedly to make selections in the
following sequence: album name track
name artist name normal display mode.
NOTE l To

return from ID3 tag information to the
folder name, press the TEXT button (9)
again for 2 seconds or longer.
l When there is no title information to be dis-
played, the display shows “NO TITLE”.
l The display can show up to 10 characters. If
a folder name, track name, or item of ID3 tag
information has more than 10 characters,
press the PAGE button (11) to view the next
10 characters.
l Folder names and track names can each be
displayed up to a length of 10 characters.
Items of ID3 tag information can each be dis-
played up to a length of 10 characters.
l Characters that the CD player cannot display
are shown as an asterisk.
With a CD autochanger 1. Press the CD button (11), and the CD autoch-anger mode will be selected, starting playback.
2. To adjust the volume and tone, refer to “To adjust the volume” on page 5-15 and “To ad-
just the tone” on page 5-15.
3. To stop the CD player, turn off the power by pressing the PWR switch (13) or switch to
the radio mode by pressing the AM/FM but-
ton (7).
4. For information concerning the handling of compact discs, refer to “Handling of compact
discs” on page 5-30.
To select a desired disc (CD autochanger only)
You can select by using the DISC button (10 or 12). Disc up
Press

the DISC button (12) until the desired disc is
reached. The disc indicator (16) will display the se-
lected disc number.
Disc down
Press the DISC button (10) until the desired disc is
reached. The disc indicator (16) will display the se-
lected disc number. For pleasant driving
5-27 5
Presented by http://mmc-manuals.ru/ \251