
Anti-lock brake system (ABS)
E00607100560
Environmental 
conditions  can  have  an  effect  on
braking.  During  sudden  braking  when  there  is
snow, ice, oil, water etc. on the road surface, a skid
may  occur.  In  this  situation,  steering  control  and
braking  effectiveness  is  reduced  and  the  stopping
distance is increased. The vehicle may also go into
an uncontrolled spin.
The ABS helps prevent the wheels from locking dur-
ing  braking,  thus  maintaining  directional  stability,
ensuring  controllability  and  providing  optimum
braking force.
Driving hints
l With ABS fitted, steering during sudden brak-
ing (when the ABS functions) differs slightly
from when the brakes are not being applied.
Steer the vehicle carefully in these conditions.
l Always  maintain  the  same  distance  from  the
vehicle in front of you as you would for a ve-
hicle not equipped with ABS.
Compared with vehicles not fitted with ABS,
your  vehicle  may  require  a  longer  stopping
distance in the following cases:
• Driving on gravel or snow-covered roads.
• Driving with tyre chains installed.
• Driving  on  roads  where  the  road  surfaceis  pitted  or  has  other  differences  in  sur-
face height.
• Driving on bumpy roads or other poor driv- ing surfaces. l
Operation  of  ABS  is  not  restricted  to  situa-
tions  where  brakes  are  applied  suddenly.
This  system  may  also  operate  to  prevent
wheel  lock  when  you  are  driving  over  man-
holes,  steel  road-work  plates,  or  the  vehicle
is  driven  over  steps  or  level  differences  in
the  road,  road  markings,  or  other  surfaces
which are difficult for the wheels to grip.
l When the ABS is activated, you may feel the
brake  pedal  pulsating  and  hear  a  characteris-
tic  noise.  Also  at  this  time,  it  may  feel  as  if
the pedal attempts to resist being depressed.
In  this  situation,  to  let  the  ABS  work  for
you,  just  hold  the  brake  pedal  down  more
firmly.  Do  not  pump  the  brake.  This  will
result in reduced braking performance. CAUTION
l
Even 
 the ABS cannot prevent the natural
laws  of  physics  from  acting  on  the  vehi-
cle. It cannot for instance avoid accidents
that  may  result  from  excessive  speed  on
bends  or  following  another  vehicle  too
closely  or  aquaplaning.  It  should  remain
the driver’s task to observe safety precau-
tions  to  judge  speeds  and  brake  applica-
tions correctly in such conditions.
l Be  sure  to  use  tyres  of  the  same  type  and
size on 4 wheels.
If tyre types or sizes are mixed, ABS may
not function normally. CAUTION
l
Never 
 install  a  limited-slip  differential,
which  is  not  a  MITSUBISHI  MOTORS
genuine  part,  as  the  ABS  may  not  func-
tion normally.
We  recommend  you  to  consult  a
MITSUBISHI  MOTORS  Authorized
Service Point.
ABS warning lamp E00607200721
The ABS warning lamp should illuminate when the
ignition 
switch  is  turned  “ON”,  and  should  go  off
in a few seconds. Starting and driving
4-21 4   
Presented  by http://mmc-manuals.ru/  \251  

The  detection  areas  are  within  approximately
50 
cm  (A)  from  the  corner  sensors,  100  cm  (B)
from  the  back  sensors,  and  60  cm  (C)  or  less  from
the ground surface, excluding the area approximate-
ly 10 cm (D) from the ground surface. The non-de-
tection  areas  (E)  are  within  approximately  20  cm
(F) from the bumper. NOTE
l If 
the rear bumper has been exposed to an im-
pact, the corner or back sensors may fail and
prevent  the  system  from  functioning  proper-
ly.  We  recommend  you  to  have  your  vehicle
inspected.
l The  sensors  do  not  detect  objects  located  in
the area directly below or near the bumper. If
the height of an object is lower than the moun-
ted  position  of  the  corner  or  back  sensors,
the  sensors  may  not  continue  detecting  it
even if they detected it initially.
For  information  on  how  to  change  the  detection
areas,  please  refer  to  “Changing  the  detection
areas” on page 4-31. CAUTION
l
The 
 corner  sensor  system  may  not  oper-
ate  properly  under  the  following  condi-
tions: • The  sensors  or  surroundings  are  cov-ered with ice, snow, or mud.
• The sensors are frozen.
• The  system  receives  ultrasonic  noise from other sources (the horns of other
vehicles,  motorcycle  engines,  brakes,
radios,  pouring  rain,  splashing  water,
tyre chains, etc.).
• The  sensors  are  extremely  hot  or  cold (while  the  vehicle  is  parked  for  a  long
period  of  time  under  a  blazing  sun  or
in cold weather).
• The vehicle tilts significantly.
• The  vehicle  is  driven  on  a  rough  road (with a bumpy, gravel, hilly, or grassy
surface).
• The vehicle is too close to an obstacle.
• The  sensors  or  surroundings  have been wiped by hand, or stickers or ac-
cessories have been attached.
l The  corner  sensor  system  may  not  prop-
erly detect the following:
• Objects  that  are  thin,  such  as  wirenets or ropes.
• Objects  that  absorb  sound  waves, such as snow.
• Objects  that  are  shaped  with  a  sharp angle.
• Objects  with  a  smooth  surface,  such as glass.
• Objects  that  are  low,  such  as  kerb- stones. NOTE
l The 
buzzer may sound lower than the normal
warning  sound  when  the  corner  sensor  sys-
tem  is  receiving  ultrasonic  noise  from  other
sources, but this is not a malfunction. The buz-
zer will stop sounding and the system will re-
turn to normal operation after the noise is no
longer received.
To operate E00615700448
To  operate  the  system  while  the  ignition  switch  is
“ON”, 
move  the  selector  lever  to  the  “R”  (RE-
VERSE)  position  on  an  A/T  vehicle,  or  move  the
gearshift  lever  to  the  “R”  (Reverse)  position  on  a
M/T  vehicle.  To  stop  the  operation,  push  the  “SO-
NAR” switch. The  “SONAR  OFF”  indication  lamp  will  illumi-
nate 
to indicate that the system has stopped operat-
ing. Starting and driving
4-30
4   
Presented  by http://mmc-manuals.ru/  \251  

CAUTION
l
The  compact  spare  tyre  is  not  as  good  as
a standard tyre in controllability and sta-
bility.  When  the  compact  spare  tyre  is
used,  avoid  quick  starts,  sudden  braking
and sharp steering.
l Avoid  driving  through  automatic  vehicle
washers and over obstacles that could pos-
sibly damage the vehicle’s undercarriage.
Because the compact spare wheel is small-
er  than  the  original  wheel,  the  ground
clearance is slightly reduced.
l The compact spare wheel is specifically de-
signed  for  your  vehicle  and  it  should  not
be used on any other vehicle. CAUTION
l
Do 
 not  use  tyre  chain  with  your  compact
spare  wheel.  Because  of  the  smaller  tyre
size,  a  tyre  chain  will  not  fit  properly.
This  could  cause  damage  to  the  wheel
and result in loss of the chain.
If  a  front  tyre  becomes  flat  when  using
tyre  chains,  first  replace  a  rear  wheel
with  the  compact  spare  wheel  and  then
use the removed rear wheel to replace the
flat  front  wheel  so  that  you  can  continue
to use the chains. CAUTION
l
The 
 compact  spare  tyre  should  not  be
used  on  any  other  wheels,  nor  should
standard  tyres,  snow  tyres,  wheel  covers
or  trim  rings  be  used  with  the  compact
spare wheel. If such use is attempted, dam-
age to these items or other vehicle compo-
nents may occur.
l Upon  installation  of  the  compact  spare
tyre,  the  overall  vehicle  height  is  lowered
slightly  as  the  tyre  is  smaller  in  diameter
than  the  standard  tyre.  When  passing
over  the  projections  on  the  road,  take
care  not  to  drive  the  vehicle  with  the
same  feeling  as  used  in  driving  with  the
standard tyre on.
l Do  not  install  more  than  one  compact
spare wheel at the same time.
l When  the  tread  wear  indicators  appear,
the tyre must be replaced.
Refer to “Wheel condition” on page 8-13. NOTE
l The 
wheel  hanger  is  designed  for  a  compact
spare  wheel  only.  It  cannot  be  used  for  stor-
age of any other kind of wheel.
Store  any  wheel  with  a  punctured  tyre  in  the
luggage area.
l Check  that  the  compact  spare  wheel  is  not
loose  by  trying  to  joggle  it  with  your  hands
or  feet.  If  it  is  loose,  the  wheel  hanger  or
hook  may  be  deformed.  Store  the  wheel  in-
side the luggage area, and have it repaired.
To remove 1. Open  the  tailgate  and  remove  the  lid  of  thehanger mounting bolt with the bar. 2. Loosen 
the  hanger  mounting  bolt  with  the
wheel nut wrench. For emergencies
6-09 6     
Presented  by http://mmc-manuals.ru/  \251  

Operation under adverse driving
conditions E00801701925
If your vehicle becomes stuck in sand,
mud or snow
If 
the  vehicle  becomes  stuck  in  snow,  sand,  or
mud, it can often be moved with a rocking motion.
Move  the  selector  lever  alternately  between  the
Sports  mode  and  “R”  (REVERSE)  position  (with
M/T,  between  1 st
  and  Reverse),  while  applying
slight pressure to the accelerator pedal.
Avoid racing the engine or spinning the wheels. Pro-
longed  efforts  to  free  a  stuck  vehicle  may  result  in
overheating and transmission failure. Allow the en-
gine  to  idle  for  a  few  minutes  to  let  the  transmis-
sion cool between rocking attempts.
If the vehicle remains stuck after several rocking at-
tempts, seek other assistance. WARNING
l When attempting to rock your vehicle out
of 
a  stuck  position,  be  sure  that  the  area
around  the  vehicle  is  clear  of  people  and
physical objects. The rocking motion may
cause  the  vehicle  to  suddenly  launch  for-
ward or backward, causing injury or dam-
age to nearby people or objects. On a flooded road
l Avoid 
flooded  roads.  Water  could  enter  the
brake  discs,  resulting  in  temporarily  ineffec-
tive brakes. In such cases, lightly depress the
brake pedal to see if the brakes operate prop-
erly.  If  they  do  not,  lightly  depress  the  pedal
several  times  while  driving  in  order  to  dry
the brake pads.
l When driving in rain or on a road with many
puddles  a  layer  of  water  may  form  between
the tyres and the road surface.
This  reduces  a  tyre’s  frictional  resistance  on
the road, resulting in loss of steering stability
and braking capability.
 
To cope with this, observe the following items:
  (a) Drive your vehicle at slow speed.
  (b) Do  not  drive  on  worn  tyres.  Always maintain 
 the  specified  tyre  inflation
pressures.
On a snow-covered or frozen road l When 
driving  on  a  snow-covered  or  frozen
road,  it  is  recommended  that  you  use  snow
tyres or tyre chains.
Refer to the “Snow tyres” and “Tyre chains”
sections.
l Avoid  high-speed  operation,  sudden  acceler-
ation, abrupt brake application and sharp cor-
nering. l
Depressing 
 the  brake  pedal  during  travel  on
snowy  or  icy  roads  may  cause  tyre  slippage
and  skidding.  When  traction  between  the
tyres and the road is reduced the wheels may
skid  and  the  vehicle  cannot  readily  be
brought  to  a  stop  by  conventional  braking
techniques.  Braking  will  differ,  depending
upon  whether  you  have  anti-lock  brakes
(ABS). As your vehicle is equipped with anti-
lock  brake  system  (ABS),  brake  by  pressing
the brake pedal hard, and keeping it pressed.
l Allow  extra  distance  between  your  vehicle
and the vehicle in front of you, and avoid sud-
den braking.
On a bumpy or rutted road l Drive  as  slow  as  possible  when  driving  on
bumpy or rutted roads. CAUTION
l
The 
 impact  on  tyres  and/or  wheels  when
driving  on  a  bumpy  or  rutted  road  can
damage the tyre and/or wheel. For emergencies
6-18
6  
Presented  by http://mmc-manuals.ru/  \251  

CAUTION
l
If  the  tyres  have  arrows  (A)  indicating
the correct direction of rotation, swap the
front  and  rear  wheels  on  the  left  hand
side  of  the  vehicle  and  the  front  and  rear
wheels on the right hand side of the vehi-
cle separately. Keep each tyre on its origi-
nal  side  of  the  vehicle.  When  fitting  the
tyres,  make  sure  the  arrows  point  in  the
direction  in  which  the  wheels  will  turn
when  the  vehicle  moves  forward.  Any
tyre  whose  arrow  points  in  the  wrong  di-
rection  will  not  perform  to  its  full  poten-
tial.
Front CAUTION
l
Avoid 
 the combined use of different types
of tyres.
Using different types of tyres can affect ve-
hicle performance and safety. Snow tyres
E01002000725
The 
use  of  snow  tyres  is  recommended  for  driving
on  snow  and  ice.  To  preserve  driving  stability,
mount  snow  tyres  of  the  same  size  and  tread  pat-
tern on all 4 wheels.
Snow tyres worn more than 50% are no longer suit-
able for use as snow tyres.
Snow  tyres  which  do  not  meet  specifications  must
not be used. CAUTION
l
Observe 
 permissable maximum speed for
your snow tyres and the legal speed limit.
NOTE l The 
laws  and  regulations  concerning  snow
tyres  (driving  speed,  required  use,  type,  etc.)
vary. Find out and follow the laws and regu-
lations in the area you intend to drive.
l If  flange  nuts  are  used  on  your  vehicle,
change to tapered nuts when steel wheels are
used.
Tyre chains E01002101130
If  tyre  chains  have  to  be  used,  ensure  that  they  are
fitted only on the drive wheels (front).
Use 
only  tyre  chains  which  are  designed  for  use
with the tyres mounted on the vehicle: use of the in-
correct size or type of chain could result in damage
to the vehicle body.
Before  fitting  tyre  chains,  We  recommend  you  to
consult a MITSUBISHI MOTORS Authorized Serv-
ice Point. Tyre size Wheel size Max chain
height[mm]
215/60R16 16x6.5 JJ 9
215/55R17 17x7.0 J The speed limit for tyre chain is 50 km/h (30 
mph)
and  remove  the  tyre  chains  as  soon  as  possible  on
snow free roads. WARNING
l DO 
 NOT  use  a  jack  when  fitting  the
chains,  as  in  thsee  conditions,  the  tyres
may slip on the icy road causing the vehi-
cle to slip off the jack. CAUTION
l
Practice 
 fitting  the  chains  before  you
need them.
Don’t  expect  help  from  other  people  in
the cold.
l Choose  a  clear  straight  stretch  of  road
where  you  can  pull  over  and  still  be  seen
while you are fitting the chains.
l Do  not  fit  chains  before  you  need  them.
This  will  wear  out  your  tyres  and  the
road surface.
l After  driving  around  100-300  metres,
stop and retighten the chains.
l Care  should  be  taken  with  extremes  of
steering  lock  to  prevent  possible  contact
between the chains and the vehicle body. Maintenance
8-14
8     
Presented  by http://mmc-manuals.ru/  \251  

CAUTION
l
Drive  carefully  and  do  not  exceed
50  km/h  (30  mph).  Remember,  fitting
chains is not going to stop accidents from
happening.
l When  tyre  chains  are  installed,  take  care
that they do not damage the disc wheel or
body.
l Do not install a tyre chain on an emergen-
cy  wheel  which  is  compact  in  size.  If  one
of  the  front  wheels  has  a  puncture,  re-
place it with one of the rear wheels and in-
stall  the  compact  spare  wheel  in  that
place before fitting a tyre chain.
l An  aluminium  wheel  can  be  damaged  by
a tyre chain while driving. When fitting a
tyre  chain  on  an  aluminium  wheel,  take
care that any part of the chain and fitting
cannot  be  brought  into  contact  with  the
wheel.
l Remove  the  wheel  covers  before  instal-
ling  a  tyre  chain,  otherwise  they  may  be
damaged  by  the  tyre  chain.  (Refer  to
“wheel covers” on page 6-13.)
l When  installing  or  removing  the  tyre
chains,  take  care  that  hands  and  other
parts of your body are not injured by the
sharp edges of the vehicle body.
l Install  the  chains  only  on  the  front  tyres
and  tighten  them  as  tightly  as  possible
with the ends securely fastened. NOTE
l The 
laws  and  regulations  concerning  the  use
of  tyre  chains  vary.  Find  out  and  follow  the
laws  and  regulations  of  the  area  you’re  driv-
ing in.
In  most  countries,  it  is  prohibited  by  law  to
use tyre chains on roads without snow. Clutch pedal free play*
E01002200163
Press 
down the clutch pedal with your fingers until
initial resistance is felt.
This distance should be within the specified range. A- Free play: 4 to13 mm
If 
the clutch pedal free play is not within the stand-
ard range, we recommend you to have it checked. Maintenance
8-15 8  
Presented  by http://mmc-manuals.ru/  \251  

Making a luggage area  2-13
Second seat  2-07
Selector lever operation
  4-15
Service precautions  8-02
Skid control function  4-21
Snow tyres  8-14
Spare wheel  6-08
Spark plug  9-10
Specifications  9-02
Speedometer  3-02
Starting  4-10
Starting the engine (diesel-powered vehicles)  4-11
Starting the engine (petrol-powered vehicles)  4-10
Steering Power steering fluid  8-09,9-14
Power steering system  4-23
Steering wheel height adjustment  4-06
Steering wheel lock  4-10
Storage spaces  5-38
Sun visors  5-32
Sunglasses pocket  5-39
Sunroof  1-13
Supplemental restraint system  2-29 How the Supplemental Restraint System
works  2-32
Servicing  2-42
Warning lamp  2-42
TTachometer  3-02
Tailgate
  1-08
Tank capacity  03
Third seat  2-10
To fold the mirror  4-07 Mirror retractor switch  4-07
Tonneau cover  5-42
Tools  6-06 Storage  6-06 Towing  6-14
Traction control function
  4-23
TCL switch  4-24
Trailer towing  4-34
Transmission Automatic transmission  4-15
Fluid  8-08,9-15
Manual transmission  4-13
Oil  9-15
Specifications  9-09
Tripmeter  3-03
Turn-signal indication lamps  3-06
Turn/Lane-change signals  3-21
Tyres  8-11 How to change a tyre  6-11
Inflation pressures  8-12
Rotation  8-13
Size (tyre and wheel)  9-11
Snow tyres  8-14
Tyre chains  8-14
Wheel condition  8-13
U Used engine oils safety instructions and disposal in-
formation  06
V Vanity mirror  5-32
Vanity mirror lamps
Bulb capacity
  8-26
Replacement  8-32
Vehicle care precautions  7-02
Vehicle dimensions  9-04
Vehicle identification number plate  9-02
Vehicle information code plate  9-02
Vehicle labeling  9-02
Vehicle performance  9-06 Vehicle weight  9-07
Ventilators  5-02
W Warning lamps  3-06
Warning triangle retaining bands
  5-45
Washer Fluid  8-08,9-14
Switch  3-23,3-24
Washing  7-03
Water temperature gauge  3-04
Waxing  7-04
Weatherstripping  8-19
Weight  9-07
Wheel Covers  6-13
Specification  9-11
Wiper Rear window  3-24
Windscreen  3-23
Wiper blades  8-17 Alphabetical index
4
Presented  by http://mmc-manuals.ru/  \251