2010 MITSUBISHI GRANDIS jacking

If the vehicle breaks down
............................................................ 6-02
Emergency starting ....................................................................... 6-02
Engine overheating ....................................................................... 6-04
Tools and jack ............................................................................... 6-06
Jacking up the vehicle
................................................................... 6-07
Spare wheel...................................................................................6-08
How to change a tyre .................................................................... 6-11
Towing.......................................................................................... 6-14
Operation under adverse driving conditions .................................6-18For emergencies
6
Presented by http://mmc-manuals.ru/ \251

3. Retract the jack, then remove it from its stor-
age location. To store
1. Retract
the jack, then return it to its original
position.
To retract
To expand 2. Expand the jack to lock it securely in place.
3. Return

the luggage floor board to its original
position. Jacking up the vehicle
E00801001393
1.

Park the vehicle on level and stable ground.
2. Set the parking brake firmly.
3. On vehicles with M/T, turn the ignition key to the “LOCK” position, move the gearshift
lever to the “R” (Reverse) position.
On vehicles with A/T, move the selector lev-
er to the “P” (PARK) position, turn the igni-
tion key to the “LOCK” position.
4. Turn on the hazard warning flashers and set up a warning triangle, flashing signal lamp,
etc., at an adequate distance from the vehi-
cle, and have all your passengers leave the ve-
hicle.
5. To prevent the vehicle from rolling when it is raised on the jack, place chocks or blocks
(A) at the tyre that is diagonally opposite
from the tyre (B) you are changing. WARNING
l Be
sure to apply chocks or blocks to the
correct tyre when jacking up the vehicle.
If the vehicle moves while jacked up, the
jack could slip out of position, leading to
an accident.
NOTE l The

chocks shown in the illustration do not
come with your vehicle. It is recommended
that you keep one in the vehicle for use if nee-
ded.
l If chocks are not available, use stones or any
other objects that are large enough to hold
the wheel in position.
6. Place the jack under one of the jacking points (C) shown in the illustration. Use the
jacking point closest to the tyre you wish to
change. For emergencies
6-07 6
Presented by http://mmc-manuals.ru/ \251

WARNING
l Set the jack only at the positions shown
here. If the jack is set at a wrong position,
it could dent your vehicle or the jack
might fall over and cause personal injury.
l Do not use the jack on a tilted or soft sur-
face.
Otherwise, the jack might slip and cause
personal injury. Always use the jack on a
flat, hard surface. Before setting the jack,
make sure there are no sand or pebbles
under the jack base.
7. Rotate
the jack by hand until the flange por- tion (D) fits in the groove (E) at the top of
the jack. 8. Remove
the wheel nut wrench and bar from
under the third seat. (Refer to “Tools and
jack” on page 6-06.)
9. Insert the bar (F) into the wheel nut wrench (G). Then put the end of the bar into the
shaft’s jack end, as shown in the illustration. Slowly rotate the wheel nut wrench until the
tyre is raised slightly off the ground surface.
WARNING
l Stop
jacking up the vehicle as soon as the
tyre is raised off the ground. It is danger-
ous to raise the vehicle any higher.
l Do not get under your vehicle while using
the jack.
l Do not bump the raised vehicle or leave it
sitting on the jack for a long time. Both
are very dangerous.
l Do not use a jack except the one that
came with your vehicle.
l The jack should not be used for any pur-
pose other than to change a tyre.
l No one should be in your vehicle when us-
ing the jack.
l Do not start or run the engine while your
vehicle is on the jack.
l Do not turn the raised wheel. The tyres
still on the ground could turn and make
your vehicle fall off the jack. Spare wheel
E00801101440
Check

the air pressure of the spare tyre frequently
and make sure it is ready for emergency use at any
time.

Maintaining the spare wheel at the highest speci-
fied air pressure will ensure that it can always be
used under any conditions (city/high-speed driving,
varying load weight, etc.).
The spare wheel is stored under the rear of the body.
Compact spare wheel
The compact spare tyre is designed to save space in
the luggage compartment and its lighter weight
makes it easier to use if a flat tyre occurs. CAUTION
l
The
pressure should be periodically
checked and maintained at the specified
pressure while the tyre is stowed.
Driving with an insufficient tyre pressure
can lead to an accident. If you have no
choice but to drive with an insufficient
tyre pressure, keep your speed down and
inflate the tyre to the correct pressure as
soon as possible. (Refer to “Tyre inflation
pressures” on page 8-12.)
l The compact spare wheel is for tempora-
ry use only and should be removed as
soon as the original wheel can be re-
paired or replaced.
l The vehicle must not be driven at speeds
in excess of 80 km/h (50 mph) while using
the compact spare wheel. For emergencies
6-08
6
Presented by http://mmc-manuals.ru/ \251

How to change a tyre
E00801202523
Before
changing a tyre, first stop your vehicle in a
safe, flat location. 1. Park the vehicle on level and stable ground.
2. Set the parking brake firmly.
3. On vehicles with M/T, turn the ignition keyto the “LOCK” position, move the gearshift
lever to the “R” (Reverse) position.
On vehicles with A/T, move the selector lev-
er to the “P” (PARK) position, turn the igni-
tion key to the “LOCK” position.
4. Turn on the hazard warning flashers and set up a warning triangle, flashing signal lamp,
etc., at an adequate distance from the vehi-
cle, and have all your passengers leave the ve-
hicle.
5. To prevent the vehicle from rolling when it is raised on the jack, place chocks or blocks
(A) at the tyre that is diagonally opposite
from the tyre (B) you are changing. WARNING
l Be
sure to apply chocks or blocks to the
correct tyre when jacking up the vehicle.
If the vehicle moves while jacked up, the
jack could slip out of position, leading to
an accident.
NOTE l The

chocks shown in the illustration do not
come with your vehicle. It is recommended
that you keep one in the vehicle for use if nee-
ded.
l If chocks are not available, use stones or any
other objects that are large enough to hold
the wheel in position.
6. Get the spare wheel, jack, jack handle and wheel nut wrench ready. NOTE
l Put

the spare wheel under the vehicle body
near the jack. This makes it safer if the jack
slips out of position. 7. On
vehicles with wheel covers, first remove
the covers (refer to “Wheel covers” on page
6-13). Then loosen the wheel nuts with the
wheel nut wrench. Do not remove the wheel
nuts yet. 8. Find
the closest jacking point to the flat tyre
(refer to the “Jacking up the vehicle” on page
6-07). Then position the jack and raise the ve-
hicle until the tyre is slightly off the ground.
9. Remove the wheel nuts with the wheel nut wrench, then take the wheel off. CAUTION
l
Handle
the wheel carefully when chang-
ing the tyre, to avoid scratching the wheel
surface.
10. Clean
out any mud, etc. on the hub surface (C), hub bolts (D) or in the installation holes
(E) in the wheel, and then mount the spare tyre. For emergencies
6-11 6
Presented by http://mmc-manuals.ru/ \251

Coolant 8-06,9-15
Number 9-02
Oil 8-04
Oil and oil filter
9-14
Overheating 6-04
Specifications 9-08
Used engine oils safety instructions and disposal
information 06
Water temperature gauge 3-04
Error codes 5-28
Exterior and interior lamp operation 8-18
FFluid capacities and lubricants 9-14
Fluid
Automatic transmission fluid

8-08,9-15
Brake fluid 8-09,9-14
Clutch fluid 8-09,9-14
Engine coolant 8-06,9-15
Power steering fluid 8-09,9-14
Washer fluid 8-08,9-14
For cold and snowy weather 8-19
Front automatic air conditioning 5-05
Front fog lamps Bulb capacity 8-25
Indication lamp 3-06
Replacement 8-28
Front fog lamp Switch 3-22
Front seat 2-05
Front turn-signal lamps Bulb capacity 8-25
Replacement 8-28
Fuel consumption 9-13
Fuel Filling the fuel tank 03
Fuel gauge 3-03
Fuel selection 02 Low fuel warning lamp 3-04
Modification/alterations to the electrical or fuel
systems 05
Tank capacity

03
Fuse load capacity 8-20
Fuse replacement 8-24
Fuses 8-20
Fusible links 8-19
G Gauges 3-05
General maintenance

8-18
General vehicle data 9-04
Genuine parts 05
Glove box 5-38
Glove box lamp Bulb capacity 8-26
Replacement 8-32
H Handling of compact discs 5-30
Hazard warning indication lamps

3-06
Head restraints 2-11
Headlamp levelling 3-19
Headlamp levelling switch 3-19
Headlamps Bulb capacity 8-25
Headlamp flasher 3-19
Replacement 8-26
Switch 3-18
Heated mirror 4-08
Heated seats 2-06
High-beam indication lamp 3-06
Hinges and latches lubrication 8-19
Horn switch 3-26 I If the vehicle breaks down 6-02
Ignition switch 4-08
Indication and warning lamps

3-05
Indication lamps 3-06
Inside rear-view mirror 4-06
Inside tailgate release 1-10
Installation of accessories 04
Instrument panel upper box 5-39
Instruments 3-02
Interior lamp switch 5-36
Interior lamps 5-35
J Jacking up the vehicle 6-07
Jack 6-06
Storage 6-06
Jump starting (Emergency starting)

6-02
K Keyless entry system 1-04
Keys 1-02
L Labeling 9-02
Lamp monitor buzzer

3-19
Lamps (headlamps, fog lamp, etc.) auto-cutout func-
tion 3-18
Lamps (room lamps, etc.) auto-cutout function (Ve-
hicles with keyless entry system) 5-37
Leakage (Fuel, engine coolant, oil and exhaust
gas) 8-18
Licence plate lamps Bulb capacity 8-26 Alphabetical index
2
Presented by http://mmc-manuals.ru/ \251