2010 MITSUBISHI GRANDIS door lock

l
When the key has been turned to either the
“LOCK” or “ACC” position or removed
from the ignition switch with the lamp
switch in the “ ”
position, and the lamp
switch is turned to the “OFF” position within
approximately 3 minutes, the auto-cutout
function will not be activated.
(Even if the lamp switch is again turned to
the “ ”
position, the lamps will not go off
automatically; the lamps will remain on as
normal.)
When you want to keep the lamps on l Turn the switch in the “OFF” position to
switch off all lamps while the key is in the
“LOCK” or “ACC” position or remove the
key from the ignition switch.
l Turn on the lamps with the switch in the
“ ”
or “ ” position again, then the
lamps will remain on.
NOTE l It is possible to disable the lamps auto-cutout
function. For further information, we recom-
mend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
Lamp monitor buzzer E00506100012
If the driver’s door is opened when the key is in the
“LOCK”

or “ACC” position or removed from the
ignition switch while the lamps are on, a buzzer
will sound to remind the driver to turn off the
lamps. When the lamp auto-cutout function acts,
the buzzer will stop automatically. When this func-
tion does not act, turn off the lamp switch to stop
the buzzer. Dipper (High/Low beam change)
E00506200114
When

the lamp switch is in the “ ”
position, the
beam changes from high to low (or low to high)
each time the lever is pulled to (1). While the high-
beam is on, the high-beam indication lamp in the in-
strument cluster will also illuminate. Headlamp flasher
E00506300333
The high-beams flash when the lever is pulled slight-
ly (2), and will go off when it is released.
When

the high-beam is on, the high-beam indica-
tion lamp in the instrument cluster will illuminate.
NOTE
l The high-beams can also flash when the
lamp switch is OFF.
l If you turn the lamps off with the headlamps
set to high-beam illumination, the headlamps
are automatically returned to their low-beam
setting when the lamp switch is next turned
to the “ ” position.Headlamp levelling
E00506400767
Headlamp levelling switch*
Except for vehicles with discharge headlamps
The

angle of the headlamp beam varies depending
on the load carried by the vehicle.
The headlamp levelling switch can be used to ad-
just the headlamp illumination distance (when the
lower beam is illuminated) so that the headlamps’
glare does not distract other drivers.
Set the switch (referring to the following table) to
the appropriate position according to the number of
people and the load in the vehicle. <6-person seat>
Vehi-
cle
condi- tion Switch
posi-tion “0” “1” “2” “3” “4” Instruments and controls
3-19 3
Presented by http://mmc-manuals.ru/ \251

CAUTION
l
If the brake warning lamp does not extin-
guish when the parking brake is fully re-
leased, the brake system may be abnormal.
Have your vehicle checked immediately.
For details, refer to “Brake warning
lamp” on page 3-06. Parking
E00600601433
Parking on a hill
To

prevent the vehicle from rolling, follow these
procedures:
Parking on a downhill slope
Turn the front wheels towards the kerb and move
the vehicle forward until the kerb side wheel gently
touches the kerb.
Apply the parking brake and place the gearshift lev-
er into the “R” (Reverse) position (with M/T) or
the selector lever into the “P” (PARK) position
(with A/T).
If necessary, apply chocks to wheels.
Parking on an uphill slope
Turn the front wheels away from the kerb and
move the vehicle back until the kerb side wheel gen-
tly touches the kerb.
Apply the parking brake and place the gearshift lev-
er into the 1 st
position (with M/T) or the selector lev-
er into the “P” (PARK) position (with A/T).
If necessary, apply chocks to wheels.
NOTE
l If your vehicle is equipped with A/T, be sure
to apply the parking brake before moving the
selector lever to the “P” (PARK) position. If
you move the selector lever to the “P”
(PARK) position before applying the parking
brake, it may be difficult to disengage the se-
lector lever from the “P” (PARK) position
when next you drive the vehicle, requiring ap-
plication of a strong force to the selector lev-
er to move from the “P” (PARK) position. Parking with the engine running
Never
leave the engine running while you take a
short sleep/rest. Also, never leave the engine run-
ning in a closed or poorly ventilated place. WARNING
l Leaving
the engine running risks injury
or death from accidentally moving the
gearshift lever (M/T) or selector lever
(A/T) or the accumulation of toxic ex-
haust fumes on the passenger compart-
ment.
Where you park
Your
front bumper can be damaged if you scrape it
over kerbs or parking stop blocks. Be careful when
travelling up or down steep slopes where your bump-
er can scrape the road. WARNING
l Do
not park your vehicle in areas where
combustible materials such as dry grass
or leaves can come in contact with a hot
exhaust, since a fire could occur.
When leaving the vehicle
Always
remove the key from the ignition switch
and lock all doors and the tailgate when leaving the
vehicle unattended.
Always try to park your vehicle in a well lit area. Starting and driving
4-05 4
Presented by http://mmc-manuals.ru/ \251

NOTE
l This
vehicle is equipped with ignition switch
illumination. • The ignition switch illumination comeson while the driver’s door is opened and
remains on for about 30 seconds after the
driver’s door is closed.
• [On vehicles with keyless entry system] When you get out of the vehicle and re-
move the ignition key, it will be illumina-
ted for about 30 seconds.

However, it will go off even while the il-
lumination comes on if the ignition
switch is set to “ON” position.
l For vehicles equipped with the Daytime Run-
ning Lamp, when the ignition switch is in the
“ON” position, the headlamp low beams etc.
are turned on.
Refer to “Headlamps” on page 3-18.
l Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered in the immobil-
izer computer. (Refer to “Electronic immobil-
izer (Anti-theft starting system)” on page
1-03.) To remove the key
For
vehicles with M/T, when removing the key,
push in the key at the “ACC” position and keep it
depressed until it is turned to the “LOCK” position,
then remove the key. For vehicles with A/T,

when removing the key,
first set the selector lever to the “P” (PARK) posi-
tion, and then turn the key to the “LOCK” position,
then remove the key. CAUTION
l
If
the engine is stopped while driving, the
brake servomechanism will cease to func-
tion and braking efficiency will deterio-
rate. Also, the power steering system will
not function and it will require greater
manual effort to operate the steering.
l Do not leave the key in the “ON” position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
l Do not turn the key to the “START” posi-
tion when the engine is running, doing so
could damage the starter motor. Starting and driving
4-09 4M/T A/T
Presented by http://mmc-manuals.ru/ \251

Interior lamp switch
E00717300263
The
interior lamp switch can be used to turn the
room & map lamps and rear personal lamps on and
off. 1 ( ) -
The room lamp & map lamps and
rear

personal lamps are off regard-
less of opening and closing of the
doors and tailgate.
NOTE l When

the room lamp & map lamp switch is
in the “ON” position, the interior lamp
switch cannot be used to turn off the room
lamp & map lamps. 2 (DOOR) - The room lamp & map lamps and
rear
personal lamps go on when a
door or the tailgate is opened. When
all doors and tailgate are closed, the
room lamp & map lamps and rear per-
sonal lamps are illuminated and dim-
med gradually for 15 seconds and
then go out.
However, the lamp goes out immedi-
ately without being dimmed in the
following cases:
l The doors and tailgate are
closed and the ignition switch
is turned to the “ON” position.
l All doors and tailgate are
locked using the key mecha-
nism of the driver’s door, the
lock knob of the driver’s door,
or the remote control switch of
the keyless entry system (if so
equipped).
NOTE l On

vehicles with keyless entry system, if the
ignition key is removed with the doors and
tailgate closed, the room lamp & map lamps
and rear personal lamps are dimmed gradual-
ly for 15 seconds and then go out.
The dimming period is also adjustable.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point.
On a vehicle equipped with a Multi Display
Station (MDS), the functions can be adjusted
on the screen. Refer to the separate operation
manual for details. l
When
the room lamp & map lamp switch is
in the “ON” position, closing the doors and
tailgate does not cause the room lamp & map
lamps to go off.
3 ( ) -
The room lamp & map lamps and
rear personal lamps are on regardless
of opening and closing of the doors
and tailgate.
Room lamp & map lamps E00717400020
With the doors and tailgate closed and the interior
lamp

switch in the “DOOR” position, pressing the
lens (A) makes the room lamp & map lamps come
on and pressing the lens again makes them go off.
If any of the doors or the tailgate is opened, the
room lamp & map lamps come on. When it is sub-
sequently closed, the lamps gradually dim for 15
seconds and then go off. For pleasant driving
5-36
5
Presented by http://mmc-manuals.ru/ \251

Vehicle care precautions
E00900100740
In
order to maintain the value of your vehicle, it is
necessary to perform regular maintenance using the
proper procedures. Always maintain your vehicle
in compliance with environmental pollution control
regulations. Carefully select the materials used for
washing, etc., to be sure that they do not contain cor-
rosives. If in doubt, we recommend you to consult
a specialist for selection of these materials. CAUTION
l
Cleaning
products can be dangerous.
Some are poisonous. Others can burst in-
to flame if you strike a match or drop
them on a hot part of the vehicle. Some
are dangerous if you breathe their fumes
in a closed space. When you use anything
in a container to clean your vehicle, al-
ways follow the instructions and always
open your vehicle doors or windows when
you’re cleaning the inside. Never use the
following to clean your vehicle: • Petrol
• Paint Thinner
• Benzine
• Kerosene
• Turpentine
• Naphtha
• Lacquer Thinner
• Carbon Tetrachloride
• Nail Polish Remover
• Acetone
l These are all dangerous, and can damage
your vehicle. Cleaning the interior of your
vehicle E00900200406
After

cleaning the interior of your vehicle with wa-
ter, cleaner or similar, wipe and dry in a shady, well-
ventilated area. CAUTION
l
Do
not use organic substances (solvents,
benzine, kerosene, alcohol, petrol, etc.) or
alkaline or acidic solutions.
These chemicals can cause discolouring,
staining or cracking of the surface.
If you use cleaners or polishing agents,
make sure their ingredients do not in-
clude the substances mentioned above.
NOTE l Always

read the instructions on the cleaner la-
bel.
Plastic, vinyl leather, fabric and
flocked parts E00900300146
1. Gently
wipe off with gauze or other soft
cloth soaked with a 3 % aqueous solution of
neutral detergent.
2. Dip cloth in fresh water and wring out well. Using this cloth, wipe off the detergent thor-
oughly. NOTE
l Do

not use the cleaners, conditioners, and pro-
tectants containing silicons or wax.
Such products may cause annoying reflec-
tions and obscure vision.
Upholstery E00900500063
1. To
maintain the value of your new vehicle,
handle the upholstery carefully and keep the
interior clean.
Use a vacuum cleaner and brush to clean the
seats. If stained, vinyl and synthetic leather
should be cleaned with an appropriate clean-
er, and cloth fabrics can be cleaned with ei-
ther upholstery cleaner or a 3 % solution of
neutral detergent in lukewarm water.
2. Clean the carpeting with a vacuum cleaner and remove any stains with carpet cleaner.
Oil and grease can be removed by lightly dab-
bing with a clean colourfast cloth and stain re-
mover.
Genuine leather* E00900600631
1. Lightly
wipe off with gauze or other soft
cloth soaked with a 5 % aqueous solution of
neutral detergent for wool.
2. Dip cloth in fresh water and wring it out well. Using this cloth, wipe off the detergent
thoroughly.
3. Apply leather protecting agent to the genuine leather surface. Vehicle care
7-02
7
Presented by http://mmc-manuals.ru/ \251

Passenger compartment fuse location (LHD)Passenger compartment fuse location (RHD)No. Symbol Electrical system Capaci-
ties
1 Ignition coil 10 A
2 Gauge 7.5 A
3 Reversing lamp 7.5 A
4 Cruise control 7.5 A
5 Relay 7.5 A
6 Heated door mirror 7.5 A
7 Windscreen wiper 30 A No. Symbol Electrical system Capaci-
ties
8 Engine control 7.5 A
9 Accessory socket 15 A
10 — ——
11 Outside rear-view
mirrors 7.5 A
12 Engine control 7.5 A
13 — ——
14 Rear window wiper 15 A
15 Central door locks 15 A
16 Rear fog lamp 10 A
17 — ——
18 — ——
19 Heater 30 A
20 Rear window demis-
ter 30 A
21 Sunroof 20 A
22 Heated seat 20 A
23 Rear air conditioning 20 A
24 Starter 10 A
25 — Spare fuse 30 A
26 — Spare fuse 20 A
27 — Spare fuse 30 A Maintenance
8-21 8
Presented by http://mmc-manuals.ru/ \251

1- High-mounted stop lamp
2-
Stop and tail lamps
3- Rear fog lamp (LHD vehicles): 21 W (W21W) Reversing lamp (RHD vehicles): 21 W
(W21W)
4- Licence plate lamps: 5 W (W5W)
5- Reversing lamp (LHD vehicles): 21 W (W21W)
Rear fog lamp (RHD vehicles): 21 W (W21W)
6- Rear turn-signal lamps: 21 W (WY21W)

Codes in parentheses indicate bulb types.
NOTE l The side turn-signal lamps, stop and tail
lamps and high-mounted stop lamp use
LEDs rather than bulbs. For repair and re-
placement, we recommend you to consult a
specialist. Inside
E01003400986 1- Rear personal lamps: 8 W
2-

Room lamp & map lamps: 8 W
3- Vanity mirror lamps*: 3 W
4- Glove box lamp: 1.4 W
5- Door lamps: 3.4 W
6- Luggage compartment lamp: 5 W Headlamps
E01003501290
Replacement of low beam (except for vehicles
with discharge headlamps) 1. Pull

out the connector (B) while pressing the
tab (A). Turn the cap (C) anticlockwise and
remove it. 2. Pull the socket (D) off the bulb.Maintenance
8-26
8
Presented by http://mmc-manuals.ru/ \251

A
Accessory (Installation) 04
Accessory socket 5-35
Active stability control (ASC)
4-23
Indication lamp 4-24
Active stability control Stability control function 4-24
Additional equipment 8-19
Air conditioning Front automatic air conditioning 5-05
Important operation tips for the air condition-
ing 5-11
Rear automatic air conditioning 5-09
Air purifier (with deodorizing function) 5-12
Airbag 2-29
Antenna Glass antenna 5-31
Anti-lock brake system (ABS) 4-21 Warning lamp 4-21
Armrest 2-06,2-08
Ashtray 5-33
Assist grip 5-44
Audio Error codes 5-28
Handling of compact discs 5-30
LW/MW/FM electronic tuning radio with CD
player 5-13
Auto-speed (cruise) control 4-25 Indication lamp 4-26
Automatic headlamp levelling 3-20
Automatic headlamp levelling warning lamp 3-20
Automatic transmission Fluid 8-08,9-15
Selector lever operation 4-15
Sports mode 4-17 BBattery 8-10
Charge warning lamp 3-08
Discharged battery (Emergency starting)
6-02
Specification 9-10
Bonnet 8-03
Bottle holder 5-41
Brake Anti-lock brake 4-21
Braking 4-20
Fluid 8-09,9-14
Parking brake 4-04
Parking brake stroke 8-16
Pedal free play 8-16
Warning lamp 3-06
Bulb capacity 8-25
C Capacities 9-14
Card holder 5-32,5-42
Cargo loads 4-32
Cargo net 5-45
Catalytic converter

8-02
Central door locks 1-07
Changing gears 4-14
Charge warning lamp 3-08
Chassis number 9-02
Check engine warning lamp 3-07,3-08
Child restraint 2-21
Child-protection rear doors 1-08
Cigarette lighter 5-34
Cleaning Exterior of your vehicle 7-03
Genuine leather 7-02
Interior of your vehicle 7-02
Plastic, vinyl leather, etc 7-02 Washing 7-03
Clutch Fluid 8-09,9-14
Pedal free play 8-15
Coat hooks 5-44
Combination headlamps and dipper switch

3-18
Compact spare wheel 6-08
Coolant (Engine) 8-06,9-15
Corner sensor system 4-29
Cup holder 5-40
D Daytime dipper button 3-04
Demister (rear window) 3-25
Diesel particulate filter (DPF)

4-12
Diesel preheat indication lamp 3-06
Dimensions 9-04
Dipper (High/Low beam change) 3-19
Door lamps 5-37 Bulb capacity 8-26
Replacement 8-31
Doors 1-06 Central door locks 1-07
Child-protection 1-08
Lock and unlock 1-06
Driving, alcohol and drugs 4-02
E Economical driving 4-02
Economical driving speed

4-14
Electric window control 1-11
Electrical system 9-10
Electronic immobilizer (Anti-theft starting sys-
tem) 1-03
Emergency starting 6-02
Engine specifications 9-08
Engine Alphabetical index
1
Presented by http://mmc-manuals.ru/ \251