
E3
50 CG IBlueEFFICIENCY ...........319
E5 00 ............................................. 320
Note s............................................. 310
Traile rloads ................................... 323
Tyres/whee ls................................. 303
Telephone
Accepting acall............................. 201
Display message ............................ 233
Menu (on-bo ardc omputer )............ 200
Number from the phone book ........ 201
Redialling ....................................... 202
Rej ecting/end ingac all................. 201
Tel ephon ecom partment .................. 245
Temperature Coolan t.......................................... 192
Outs idet emper ature ...... ............... .193
Setting ........................................... 125
Through-loading ................................ 246
Through-loadin gfeature ................... 246
Time (on-b oard computer) ................205
TIRE FITk it.......................................... 276
Topping up the headlamp clean ing
system ................................................ 262
Toppin gupthe winds creen washer
system ................................................ 262
Top Tether ............................................ 49
Total distanc erecorder .................... 197
Tow-away protection ..........................61
Towing Important safety notes ..................290
Towing atrailer
Folding in the ball coupling ............189
Fol ding out the bal lcoupling .......... 186
Towing away
Fitting the tow inge ye.................... 291
Removing the tow inge ye............... 292
Tow-starting
Emergency engine starting ............293
Fitting the tow inge ye.................... 291
Important safety notes ..................290
Removing the tow inge ye............... 292
Trailer
7-pi nconnector ............................. 190
Bulb failure ind icator for LED
lamps ............................................. 190
Co upling up ................................... 186
Decouplin g..................................... 187 Disp
laym essage ............................ 218
Po wer suppl y................................. 189
Trailer coupli ng(cleaning instruc-
tions) .................................................. 268
Trailer coupli ng(display message) ..232
Trailer loads Techn ical data ............................... 323
Trailer tow hitch ................................ 186
Trailer towing .................................... 144
Blind Spo tAssist ...... ...................... 185
Driving tips .................................... 187
ESP ®
................................................ 58
Mo unting dimensions ....................322
Parking Guid ance ........................... 180
Parktroni c...................................... 176
Transmission pos ition display .........143
Transmission pos itions .................... 143
Trip computer (on-b oard com-
puter) ................................................. .197
Trip meter Calling up ....................................... 197
Resetting (on-bo ardc omputer )...... 198
Turn si gnal (di splay message) .........218
Turn si gnal lamps .............................. 108
TV Operating (on-bo ardc omputer )..... 200
se eS eparate operating instructions
Two- wayradio
Freq uencies ................................... 311
Installati on .................................... .311
Transmissio noutput (maximum ).... 311
Type identification plate
seeV ehicle identificat ionplate
Tyre grip ............................................. 155
Tyre pressure Display message ............................ 230
Not reac hed( TIREFIT) .................... 279
Pressure loss warning ....................301
Reache d(TIREFIT) .......................... 279
Rec ommended ............................... 299
Tyres
Checking ........................................ 299
Cleaning ......................................... 299
Direction of rotatio n...................... 302
Flat tyre ......................................... 275
Guid elines to be observed .............298
Replacing ....................................... 30216
Index BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 16 

!
For cleaning ,donot use any of the fol-
lowing:
R alcohol-based thinner or petrol
R abrasive cleanin gagents
R commercially-available household clean-
ing agents
These ma ydamage the displ ay surface.Do
not put pressure on the displa ysurface
when cleaning. This could lead to irrepara-
ble damage to the display.
Cleaning the plastic trim G
Risk of injury
When cleaning the steering wheel boss and
dashboard, do not use cockpit sprays or
cleaning agents containing solvents. Cleaning
agents containing solvents cause the surface
to become porous, and as aresult plastic
part smay break away and be thrown around
the interior when an airbag is deployed, which
may result in severe injuries.
! Do not affix the following to plastic surfa-
ces:
R stickers
R films
R scented oil bottles or similar items
You can otherwise damage the plastic.
! Do not allow cosmetics, insect repellent
or sunscreen to come in contact with the
plastic trim .This maintain sthe high-quality
look of the surfaces.
X Wipe the plastic trim with adamp, lint-free
cloth, e.g. amicrofibre cloth.
X Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
The surface may change colour tempora-
rily. Wait until the surface is dry again. Cleanin
greal wood and trim strips X
Wipe the wooden trim and trim strips with
ad amp, lint-free cloth, e.g. amicrofibre
cloth.
X Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
! Do not use solvent-based cleaning agents
such as tar remover, wheel cleaners, pol-
ishes or waxes. There is otherwise arisk of
damaging the surface.
Cleanin gthe seat covers !
Do not us emicrofibre cloths to clean gen-
uine leather, artificial leather or
Alcantara ®
covers. If used often ,these can
damage the cover.
! Observ ethe followin gwhen cleaning:
R clea ngenuin eleather covers carefully
with adamp cloth and then wipe the cov-
ers down with adry cloth .Make sure that
the leather does not become soaked .It
may otherwise become rough and
cracked .Only use leather care agents
that have bee ntested and approved by
Mercedes-Benz. You can obtain these
from aqualified specialist workshop, e.g.
aM ercedes-Ben zService centre.
R clean artificial leather covers with acloth
moistened with asolution con taining 1%
detergent (e.g. washing-up liquid).
R clean cloth cover switham icrofibre cloth
moistened with asolution con taining 1%
detergent (e.g. washing-up liquid). Rub
carefully and always wipe entire seat sec-
tions to avoid leaving visible lines. Leave
the seat to dry afterwards. Cleaning
results depend on the type of dirt and
how long it has been there.
R clean Alcantara ®
cover swithadamp
cloth. Make sure you wipe entire seat
sections to avoid leaving visible lines. Care
269Maintenance and care
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 269 Z 

tha
tyou additionally equip your vehicle
with the TIREFI Tkit if you fit tyres that do
not featur erun-flat properties ,e.g. winter
tyres .You can obtain aTIREFIT kit from a
Mercedes-Benz Service Centre ,for exam-
ple.
X Stop the vehicle as far away as possible
from traffic on solid, non-slipper yand level
ground.
X Switch on the hazard warning lamps.
X Firmly depress the parking brake.
X Bring the front wheels into the straight-
ahead position.
X Vehicles with manua ltran smission:
engage first or reverse gear.
X Vehicles with au tomatic transmission:
move the selector lever to P.
X Switch off the engine.
X Vehicles without KEYLESS-GO: remove
the key from the ignition lock.
X Vehicles with KEYLESS-GO: openthe
driver's door.
The on-boar delectronics have status 0,
which is the same as the key having been
removed.
X Vehicles with KEYLESS-GO: removethe
Star t/Stop butto nfrom th eignition lock
(Y page 135).
X All occupan ts must get out of the vehicle.
Make sur ethat they ar enot endangered as
they get out of the vehicle.
X Make sure that no one is near the danger
area whilst awheel is being changed. Any-
one who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
X Get out of the vehicle. Pay attention to traf-
fic conditions when doing so.
X Close the driver's door.
X Plac ethe warnin gtriangl e(Ypage 273) a
suitable distanc eaway .Observ elegal
requirements. TIREFIT kit
Using th eTIREFIT kit You can use the TIREFIT kit to seal small
punctures, particularly those in the tyre tread.
You can use TIREFIT at outside temperatures
down to -20 †.
G
Risk of accident
In the following situations, your safety is at
particular risk and tyre sealant is unable to
provide breakdown assistance if:
R ther eare cuts or punctures in th etyre
greater than 4mm
R the whee lrim is damaged
R you have driven at very low tyre pressures
or on aflat tyre
Do not drive any fur ther. Consult aqualified
specialist workshop which has the necessary
specialist knowledg eand tool stocarry out
the work required.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centr efor this pur-
pose. In particular ,work relevant to safet yor
on safety-related system smust be carried out
at aq ualified specialist workshop.
X Do not remov eany foreig nobjects which
have penetrated the tyre, e.g. screw sor
nails.
X Remove the TIREFI Tkit,t he accompanying
"max. 80 km /h"sticker and the electric air
pump from the stowage well underneath
the boo tfloor (Y page 274). 276
Flat tyreBreakdown assis
tance
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 276 

X
Affix part :of the sticker withi nthe driv-
er's field of vision.
X Affix part ;of the sticker near the valve
on the whee lwitht he defective tyre. G
Risk of injury
TIREFI Tmust not come into contact with your
skin, eyes or clothing.
R If TIREFIT come sinto contact with your
eyes or skin, imme diatelyr ins ethoroughly
with clean water.
R Chang eout of clothin gwhich has com einto
contac twith TIREFIT immediately.
R If an allergic reaction occurs, consult adoc-
tor immediately.
Keep TIR EFITaway fro mchildren.
R If TIREFIT is swallowed, immediately rinse
your mouth out thoroughly and drink plenty
of water.
R Do not induce vomiting. Consult adoctor
immediately.
R Do not inhal eTIREFIT fumes.
i If TIREFIT leaks out, allo wittod ry. It can
then be removed like alaye roff ilm.
If you get TIREFIT on your clothing, have it
cleaned as soon as possible with perchloro-
ethylene. G
Risk of injury
Comply with the manufacturer's safety
instructions shown on the sticker on the elec-
tric air pump.
Your vehicle is provided with one of two dif-
feren telectric air pumps:
R Version 1: the hose with the pressure
gauge and the cable are behind aflap.
R Version 2: the pressure gauge is in the
electric air pump. TIREFIT kit version 1
X
Open flap ;.
X Pull connector Awith the cable and hose
B out of the housing.
X Screw hose Bonto flange Cof TIREFIT
sealant filler bottle :.
X Place TIREFIT sealant filler bottle :head
downwards into recess =of the electric
air pump. X
Remove the cap from valve Eon the faulty
tyre. Flat tyre
277Breakdown assistance
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 277 Z 

X
Make sur epressure release screw Fon
pressure gauge Gis full yclosed.
X Screw filler hose Donto valve E.
X Insert connector Ainto the cigarette
lighter socket (Y page 252)orinto a12V
socket in your vehicle (Y page 253).
X Tur nthe key to position 1(Ypage 135) in
the ignition lock.
X Press on/off switch ?on the electric air
pum pto I.
The electric air pum pisswitched on. The
tyre is inflated.
i First, TIREFI Tispumped into the tyre. The
pressure can briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the electric pum pdur-
in gt his phase.
X Let th eelectric pump run for fiv eminutes.
The tyre should then have attained apres-
sure of at le ast180 kPa (1.8 bar/26 psi).
! Do not operate the el ectric ai rpump for
longe rthan eight minutes at atime without
ab reak. It may otherwis eoverheat.
Th ea ir pump can be operated again once
it has cooled down.
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha sbeen achieved, see
(Y page 279).
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha snot been achieved, see
(Y page 279). TIREFIT kit version 2 X
Pull connector ?with the cable and hose
A out of the housing.
X Screw hose Aonto flange Bof TIREFIT
sealant fil lerb ottle :.
X Place TIREFI Tsealant filler bottle :head
downwards into recess ;of the electric
air pump. X
Remove the cap from valve Con the faulty
tyre.
X Screw filler hose Donto valve C.
X Insert connector ?into the cigarette
lighter socket (Y page 252) or into a12V
socket in your vehicle (Y page 253).
X Turn the key to position 1(Ypage 135 )in
the ignition lock.
X Press on/off switch =on the electric air
pump to I.
The electric air pump is switched on. The
tyre is inflated. 278
Flat tyreBreakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 278 

i
First, TIREFIT is pumpe dinto the tyre .The
pressur ecan briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the electric pum pdur-
in gt his phase.
X Let th eelectric pump run for fiv eminutes.
The tyre should then have attained apres-
sure of at le ast180 kPa (1.8 bar/ 26 psi).
! Do not operate the el ectric ai rpump for
longe rthan eight minutes at atime without
ab reak. It may otherwis eoverheat.
Th ea ir pump can be operated again once
it has cooled down.
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha sbeen achieved, see
(Y page 279).
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha snot been achieved, see
(Y page 279).
Tyre pressur eof180 kPa (1.8 bar, 26
psi) is not reached If after fiv
eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha snot been achieved:
X Press the on/off switch on the electri cair
pump to 0.
The electric air pump is switched off.
X Unscrew the filler hose from the valv e.
X Very slowly drive forwards or reverse
ap proximately 10 m.
X Pum pupt he tyreagain. G
Risk of accident
If after fiv eminutes apressure of 180 kPa
(1 8 bar/26 psi) cannot be achieved ,the tyre
is too severel ydamaged.
Do not drive any further. Consult aqualified
specialist workshop which has the necessary
specialist knowledge and tools to carry out
the work required. Mercedes-Benz recom-
mends that you use aMercedes-Ben zService
Centr efor this pur pose.Inp articular, work
relevant to safety or on safety-related sys- tems must be carrie
dout at aqualified spe-
cialist workshop.
Tyre pressure of 180 kPa (1.8 bar, 26
psi) is reached X
Press the on/off switch on the electric air
pump to 0.
The electric air pump is switched off.
X Remove the TIREFIT kit from the wheel. G
Warning
The air hos emay still be hot. Exercise proper
cautio ntoavoidb urning yourself when
detaching the electric air pump.
! After use, excess TIREFIT may run out of
the filler hose. This may cause stains.
Therefore, place the filler hos einthe plastic
bag whic hcontaine dthe TIREFIT kit.
X Stow away the TIREFIT kit ,the electric air
pum pand the warning triangle.
X Pull away immediately. G
Risk of accident
Do not exceed the maximum speed of
80 km/h.
The "max. 80 km/h" labe lmust be affixed in
the driver's field of vision.
The vehicle's handling characteristics may be
affected.
X Stop after driving for approximately ten
minutes and check the tyre pressure with
the electric air pump. G
Risk of accident
If the tyre pressure is less than 130 kPa
(1.3 bar/26 psi), the tyre is too severely dam-
aged. Do not drive any further. Consult a
qualified specialist workshop which has the
necessary specialist knowledg eand tool sto
carry out the work required. Mercedes-Benz
recommends that you use aMercedes-Benz
Ser vice Centre for thi spurpose. In particular,
work relevant to safety or on safety-related Flat tyre
279Breakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 279 Z. 

systems must be carried out at
aqualified
specialist workshop.
X Correct the tyre pressure if it is at least
130 kPa(1.3 bar/26 psi) (for the value ssee
the fuel filler flap).
X To increase th etyre pressure: switch on
th ee lectric air pump. TIREFIT kit version 1
X
To reduce the tyr epressure (version
1): ope npressure release screw Fon
pressure gauge G. TIREFIT kit versio
n2
X To reduce the tyre pressure (version
2): pres spressure release button Enext
to pressure gauge F.
X Sto wa waythe TIREFIT kit ,the electric air
pum pand the warning triangle.
X Drive to the neares tworkshop and have the
tyr ec hange dthere.
X Hav ethe TIREFIT kit replaced as soon as
possible at aqualified special istworkshop,
e.g. at aMercedes-Ben zService Centre. H
Environmenta
lnote
Have the used TIREFI Tkit dispose dofprofes-
sionall y, e.g. ataM ercedes-Ben zService
Centre.
X Hav ethe TIREFIT kit replaced ever yfour
year sataq ualified special istworkshop,
e.g. aMercedes-Ben zService Centre. Changing
awhee land fitting th espare
wheel
Preparing the vehicle G
Risk of accident
The wheel and tyre size of the emergency
spare wheel/s pare wh eelm ay differ to tha tof
the damaged wheel. Whe nusing an emer-
genc yspare wheel/spar ewheel the handling
characteristic softhe vehicle ma ychange.
Adap tyour style of driving accordingly.
Never operate the vehicle with mor ethan one
emergenc yspare wheel/spar ewheel that dif-
fer sins ize.
Only use an emergenc yspare wheel/spare
wheel of adiffering size briefly and do not
switch off ESP ®
.
When using an emergenc yspare wheel you
must not exceed the maximum speed of
80 km/h. G
Risk of accident
Hav ethe emergenc yspare wheel/spare
wheel replaced with anew wheel as soon as
possible at aqualified specialist workshop
which has the necessary specialist knowledge
and tools to carry out the work required.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre for this pur-
pose .Inp articular, work relevant to safety or
on safety-related systems must be carried out
at aq ualified specialist workshop.
i Vehicles withou tanemergency spare
wheel/spare whee lare not equippe dwith
at yre-change tool kit at the factory. For 280
Flat tyreBreakdown assistance
BA 207 ECE ÄJ 2010
/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 280 

example at
aMercedes-Benz Ser vice
Centre.
R When parking your vehicle, make sure that
the tyres do not ge tdeformed by the kerb
or other obstacles. If it is necessary to drive
over kerbs, speed humps or simila releva-
tions, try to do so slowly and at an obtuse
angle. Otherwise, the tyres, particularly the
sidewalls, can get damaged. Maintenance and care of wheels and
tyres
Checking wheels and tyres
R Regularly chec kthe wheels and tyres of
your vehicle for damage (e.g. cuts, punctu-
res, tears, bulges on tyres and deformation,
crack sorseverecorrosion on wheels), at
least ever y14d ays, as well as after driving
off-road or on rough roads. Damaged
wheels can cause aloss of tyr epressure.
R Regu larly check th etyre tread depth and
the conditio nofthe tread across the whole
widt hofthe tyr e(Ypage 299). If neces-
sary, tur nthe front wheels to full lock in
orde rtoi nspect the inner sid eofthe tyre
surface.
R All wheels must hav eavalve cap to protect
the valve against dirt and moisture. Do not
fit anything onto the valve (such as tyre
pressure monitorin gsystems) othe rthan
the standar dvalve cap or other valve caps
approved by Mercedes-Ben zfor your vehi-
cle.
R Regularly chec kthe pressur eofall the tyres
including the emergenc yspare wheel or the
spare wheel, particularly prior to long trips,
and correc tthe pressur easnecessary
(Y page 299). Ty
re tr ead G
Risk of accident
Bear in mind that:
R tyre grip decreases rapidly on wet roads
when the tread depth is less than 3mm.
Thus ,you should repl acet yres that have
insufficient tread.
R winter tyres sho uld bereplaced when the
trea ddepth is 4mmorl ess as they will no
longer provide adequat egrip.
R thet rea donat yre may not wear evenly.
Thus ,you should regularly chec kthe tread
depth and the condition of the tread across
the entire widt hofall tyres. If necessary,
turn the steerin gwheel so that you can see
the tyr etrea dm ore easily.
You coul dotherwise los econtrol of the vehi-
cle and cause an acciden tdue to the reduced
grip of the tyres on the road. Storing tyres
Store tyres that are not being used in acool,
dry and preferably dar kplace. Protect the
tyres against oil, grease, petrol and diesel. Cleaning tyres
! Do not use ahigh pressure jet with circu-
lar jet nozzles (concentrated-power jets) to
clean the tyres. The high pressure of the
water jet could damage the tyres. Always
replace damaged tyres. Tyr
epressures Recommended ty
repressures
You will find atable of tyre pressures for var-
ious operating conditions on the inside of
your vehicle's fuel filler flap.
The applicable value for the emergency spare
wheel is stated on the spare wheel and in the
technical data section. Tyr
epressures
299Tyresa nd wheels
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 299 Z