2010 Lexus GX460 Navigation Manual

TELEPHONE AND INFORMATION
136 D
Connecting a Bluetoothrphone
AUTOMATICALLY
When you register your phone, auto
connection will be turned on. Always
set it to this mode and leave the
Bluetooth rphone in a condition where
connection can be established.
When the “ENGINE START STOP”
switch is in ACCESSORY or IGNITION
ON mode, a nearby cellular phone you
have registered is searched for.
Next, the system automatically con-
nects with the latest of the phones con-
nected to in the past.
Then, the connection result is dis-
played.
This screen appears when the Bluetooth r
phone is first connected after the “ENGINE
START STOP” switch is in ACCESSORY
or IGNITION ON mode.
INFORMATION
It may take time, the phone connec-
tion is carried out during Bluetooth r
audio play.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

TELEPHONE AND INFORMATION
137
MANUALLY
When the auto connection has failed or
“Handsfree Power” is turned off, you
have to connect Bluetoothrmanually.
1. Push the “INFO/PHONE” button.
2. Touch “Phone”.
3. Touch “Connect Phone”.
4. Touch “Handsfree Power”, or select
the phone to connect.
5. The “Connect Bluetooth*” screen is
displayed.
∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc.
6. When the connection is completed,
this screen is displayed.
Now you can use the Bluetooth rphone.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
5

TELEPHONE AND INFORMATION
138
When you connect the phone while
Bluetoothraudio is playing
This screen is displayed, and the
Bluetooth raudio will stop temporarily.
DReconnecting the Bluetooth r
phone
If the Bluetooth rphone is
disconnected with a poor reception
from the Bluetooth rnetwork when the
“ENGINE START STOP” switch is in
ACCESSORY or IGNITION ON mode,
the system automatically reconnects
the Bluetooth rphone. In this case, the
connection result is not displayed.
If the Bluetooth ris disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen. Recon-
nect it by the following methods.
DSelect the Bluetooth rphone again.
DEnter the Bluetooth rphone.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

TELEPHONE AND INFORMATION
139
After you enter the Bluetoothrphone,
you can call by using hands− free sys-
tem. You can call using the 6 methods
described below.
DBy dial
You can call by inputting the phone
number.
This cannot be operated while driving.
1. Push the “INFO/PHONE” button.
You can also push
of the steering
wheel to display the “Phone” screen.
2. Touch “Phone”.
3. Touch the desired key to input the
phone number.
Each time you touch
, an inputted
digit is deleted.
When you touch “Redial”, the number you
called last is inputted.
Touch
or pushof the steering
wheel.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
— Call on the Bluetooth r
phone
5

TELEPHONE AND INFORMATION
140 D
By phonebook
You can call by phonebook data which
is transferred from your cellular phone.
The system has one phonebook for
each telephone. You can register up to
1000 numbers in total of phonebooks.
This cannot be operated while driving.
1. Touch “Contacts”.
2. Select the desired data from the list.
3. Select the desired number from the
list.
Touch
or pushof the steering
wheel.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

TELEPHONE AND INFORMATION
141
When the phonebook is empty
1. Touch “Contacts”.
2. Touch “Yes” if you want to transfer
new contacts from a cellular phone.
Touch “No” if you want to edit the
phonebook.
DBy speed dial
You can call using registered phone
numbers which can be selected from a
phonebook. (See “ DRegistering the
speed dial” on page 369 for registering
the speed dial.)
This can be done while driving.
1. Touch “Speed Dials”.
2. Touch the desired number to call.
You can change the page by touching
“Speed Dial 2” or “Speed Dial 3” tab.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
5

TELEPHONE AND INFORMATION
142 D
By call history
You can call by call history which has 4
functions below.
All:
All the numbers above which were memo-
rized
Missed:
Calls which you missed
Incoming:
Calls which you received
Outgoing:
Numbers which you called
You can call using the latest 5 call history
items shown by “All”while driving.
1. Touch “Call History”.
2. Select the desired data from the list.
When the list is switched, touch “All”,
“Missed” ,“Incoming” or“Outgoing”
tab.
3. Touchor pushof the steer-
ing wheel.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

TELEPHONE AND INFORMATION
143
You can call using the latest call history
item.
1. Push
of the steering wheel to
display the “Phone” screen.
2. Push
of the steering wheel to
display the “Call History” screen.
3. Push
of the steering wheel to se-
lect the latest history item.
4. Touch
or pushof the steer-
ing wheel to call the latest history item.
DWhen you call by phonebook, the
name (if registered) is displayed.
DWhen you call the same number
continuously, only the newest number
is registered.
DWhen a phone number registered in
the phonebook is received, the name
and the number are displayed.
DUnnoticed phone number such as a
public phone is not memorized in the
system.
DA international phone call may not be
made depending on the cellular phone
which you have.
DBy voice recognition
You can call by giving a command. (For
the operation and command of voice
recognition, see “Voice command sys-
tem” on page 44.)
This can be operated while driving.
The “Dial by Name” operating procedure is
explained here.
Other operating procedures are also simi-
lar.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
5