2010 Lexus GX460 navigation system

NAVIGATION SYSTEM: MEMORY POINTS
11 8
(b) Editing address book entries
The icon, name, location and/or telephone
number of a registered address book entry
can be edited.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Address Book” on the “Nav-
igation Settings” screen.
4. Touch “Edit”.
5. Touch the button of the desired ad-
dress book entry.
6. Touch “Edit” for the item you want
to change.
“Name”: To edit address book entry
names. The names can be displayed on
the map. (See page 120.)
“Location”: To edit location information.
(See page 121.)
“Phone #”: To edit telephone numbers.
(See page 121.)
“Icon”: To select icons to be displayed on
the map. (See page 119.)
7. Touch “OK”.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

NAVIGATION SYSTEM: MEMORY POINTS
11 9
D
To change “Icon”
1. Touch “Edit” of “Icon”.
2. Touch the desired icon.
Change pages by touching
“Page 1”,
“Page 2” or“With Sound” tab. SOUND ICONS
You can set a sound for some address
book entries. When the vehicle ap-
proaches the location of the address book
entry, the selected sound will be heard.
1. Touch “With Sound” on the “Ad-
dress Book Entry Icon” screen.
2. Touch the desired sound icon.
The next screen appears when
“Bell (with
Direction)” is touched.
Touch eitherorto adjust the
direction. Touch “OK”.
The bell sounds only when the vehicle ap-
proaches this point in the direction that has
been set.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
4

NAVIGATION SYSTEM: MEMORY POINTS
120 D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using the alphanu-
meric keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.DISPLAYING MEMORY POINT NAMES
The name of an address book entry can be
set to display on the map.
To show the name, touch “On” on the
“Edit Address Book Entry” screen. To
not show it, touch “Off”.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

NAVIGATION SYSTEM: MEMORY POINTS
121
D
To change “Location”
1. Touch “Edit” of “Location”.
2. Touch one of the 8 directional but-
tons to move the cursorto the de-
sired point on the map.
3. Touch “OK”.
The previous screen will be displayed.
DTo change “Phone #”
(telephone number)
1. Touch “Edit” of “Phone #”.
2. Enter the number using number
keys.
3. Touch “OK”.
The previous screen will be displayed.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
4

NAVIGATION SYSTEM: MEMORY POINTS
122
(c) Deleting address book entries
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Address Book” on the “Nav-
igation Settings” screen.
4. Touch “Delete”.
5. Touch the button to be deleted.
“Select All”:To select all addresses in the
address book.
“Unselect All”: To unselect all of the se-
lected addresses.
6. Touch “Delete”.
7. To delete the address book entry,
touch “Yes”. To cancel the deletion,
touch “No”. Areas you want to avoid because of traffic
jams, construction work or other reasons
can be registered as areas to avoid.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid”.
DRegistering areas to avoid (See
page 123.)
DEditing areas to avoid (See page
124.)
DDeleting areas to avoid (See page
127.)
GX460 Navi (U)
OM60E73U
Finish
09.09.24
— Setting up the “Areas to
Avoid”

NAVIGATION SYSTEM: MEMORY POINTS
123
(a) Registering areas to avoid
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “New”.
5. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided.(See
“Destination search” on page 62.)
6. Scroll the map to the desired point.
“Adjust Location”: To adjust the position
in smaller increments.
7. Touch “Enter”.
8. Touch eitherorto
change the size of the area to be
avoided.
9. Touch “OK”.
INFORMATION
D If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
D Up to 10 locations can be regis-
tered as points/areas to avoid.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
4

NAVIGATION SYSTEM: MEMORY POINTS
124
(b) Editing area to avoid
The name, location and/or area size of a
registered area can be edited.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “Edit”.
5. Touch the desired area button.
6. Touch “Edit” for the item you want
to change.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 125.)
“Location”: To edit area location. (See
page 126.)
“Size”: To edit area size. (See page 126.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature, touch“On”
on the “Area to Avoid” screen. To turn off
the feature, touch “Off”on the “Area to
Avoid” screen.
7. Touch “OK”.
GX460 Navi (U)
OM60E73U
Finish
09.09.24

NAVIGATION SYSTEM: MEMORY POINTS
125
D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using alphanumeric
keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.
DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that
may be displayed on the map can be set.
To show the name, touch “On” on the
“Area to Avoid” screen. To not show it,
touch “Off”.
GX460 Navi (U)
OM60E73U
Finish
09.09.24
4