2010 HONDA ODYSSEY ignition

[x] Cancel search: ignition

Page 418 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual CONT INUED
If the oil lif e is 15 percent or less,
you will see the oil lif e indicator
everytimeyouturntheignition
switch to the ON (II) position. This
indicator stays on until you cancel it
by press

Page 419 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual You can change the display to the
odometer, the trip meter, or the
outside temperature by pushing the
select/reset knob on the instrument
panel.
When the remaining engine oil lif e is
less than 5 perc

Page 420 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µ
CONT INUED
If you still do not perf orm the
indicated maintenance, you will see a
negative mileage, f or example
‘‘ 543,’’ blinking in the display. This
negative mileage means that you
sho

Page 421 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Immediately have the service
perf ormed, and make sure to reset
the display as described on page .
You can

Page 423 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Press the select/reset knob f or
about 10 seconds. The engine oil
lif e indicator and the maintenance
item code(s) will blink.Press the select/reset knob f or
more than 5 seconds. The
maintenance item

Page 424 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Press the SEL/RESET button on
the steering wheel. The
maintenance item code(s) will
disappear, and the engine oil lif e
will reset to ‘‘100.’’If you want to cancel resetting,
presstheINFObutto

Page 466 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual The jack is behind a cover in the
cargo area on the driver’s side,
and tools are on the back of the
cover. Remove the cover by
pushing the tabs down and pulling
the cover out. Open the tailgate.
Par

Page 474 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Diagnosing why the engine won’t
start f alls into two areas, depending
on what you hear when you turn the
ignition switch to the START (III)
position:You can hear the starter motor
operating normall