2010 HONDA ODYSSEY service reset

[x] Cancel search: service reset

Page 79 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual This indicator comes on f or a f ew
seconds when you turn the ignition
switch to the ON (II) position. It
remindsyouthatitistimetotake
your vehicle in f or scheduled
maintenance. The maintenance main

Page 83 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual The inf ormation display in the
instrument panel shows you the
engine oil lif e and maintenance
service items when the ignition
switch is in the ON (II) position. This
inf ormation helps to keep you a

Page 89 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual In the lef t corner of the lower
segment, a compass indicates which
direction your vehicle is pointed.The multi-inf ormation display in the
instrument panel shows you the
engine oil lif e and maintena

Page 99 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual When the engine oil lif e reaches 15%,
the display shows ‘‘SERVICE DUE
SOON’’ and the code f or the
maintenance items to be perf ormed.
When the engine oil lif e reaches 5%,
the display shows

Page 418 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual CONT INUED
If the oil lif e is 15 percent or less,
you will see the oil lif e indicator
everytimeyouturntheignition
switch to the ON (II) position. This
indicator stays on until you cancel it
by press

Page 420 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µ
CONT INUED
If you still do not perf orm the
indicated maintenance, you will see a
negative mileage, f or example
‘‘ 543,’’ blinking in the display. This
negative mileage means that you
sho

Page 421 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Immediately have the service
perf ormed, and make sure to reset
the display as described on page .
You can

Page 423 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Press the select/reset knob f or
about 10 seconds. The engine oil
lif e indicator and the maintenance
item code(s) will blink.Press the select/reset knob f or
more than 5 seconds. The
maintenance item
Page:   1-8 9-16 next >