2010 FORD EXPEDITION radio

[x] Cancel search: radio

Page 72 of 420

FORD EXPEDITION 2010 3.G Owners Manual Note (navigation-based radio
systems only):Whenadiscis
inserted, the FES switches to
dual-play mode–rear speakers turn off, and headphones turn on. To
switch back to all four speakers on, press the

Page 73 of 420

FORD EXPEDITION 2010 3.G Owners Manual Note (navigation-based radio
systems only):Whenadiscis
inserted, the FES switches to
dual-play mode–rear speakers turn off, and headphones turn on. To
switch back to all four speakers on, press the

Page 74 of 420

FORD EXPEDITION 2010 3.G Owners Manual 3. Connect an auxiliary audio/video
source by connecting RCA cords
(not included) to the RCA jacks on
the left hand side of the system.
•Yellow (1) — video input
•White (2) — left channel audi

Page 75 of 420

FORD EXPEDITION 2010 3.G Owners Manual 4. Press MEDIA to change the audio source of the active channel (A or
B). The audio source will be shown on the display. You may change the
active channel by pressing the A or B headphone control butt

Page 79 of 420

FORD EXPEDITION 2010 3.G Owners Manual 11./(Headphones/Speakers): Press once for Dual Play
(Headphone mode- the rear speakers are muted) and press again for
Single Play (same media playing through all speakers). You can also
press the 2 an

Page 86 of 420

FORD EXPEDITION 2010 3.G Owners Manual Wired headphones
WARNING:Do not leave children unattended in the vehicle and
do not let children operate the system while unsupervised. If
wired headphones or auxiliary systems are used, children may

Page 87 of 420

FORD EXPEDITION 2010 3.G Owners Manual Single Play:Single play consists of all occupants in the vehicle listening
to the same playing media over the front and rear speakers. When the
DVD system is on, and the same source is playing through

Page 88 of 420

FORD EXPEDITION 2010 3.G Owners Manual Press the Headphone Control button
A to change the audio source for
Channel A.
Press MEDIA to change the audio
source for Channel A. This
information will display on the DVD
system screen.
Press the H