Page 464 of 616
When to Add Engine Oil
If the oil is below the cross-hatched area at the tipof the dipstick, add at least one quart/liter of therecommended oil. This section explains what kindof oil to use. For engine oil crankcase capacity, seeCapacities and Specifications on page 7!115.
Notice:Do not add too much oil. If the enginehas so much oil that the oil level gets abovethe cross-hatched area that shows the properoperating range, the engine could be damaged.
SeeEngine CompartmentOverviewon page 7!16for the location of theengine oil fill cap.
Add enough oil to put the level somewhere in the properoperating range. Push the dipstick all the way back inwhen through.
7-18
Page 561 of 616
Capacities and Specifications
The following approximate capacities are given in English and metric conversions. SeeRecommended Fluids andLubricantson page 8!10for more information.
ApplicationCapacities
EnglishMetric
Air Conditioning RefrigerantFor the air conditioning system refrigerant chargeamount, see the refrigerant caution label locatedunder the hood. See your dealer for more information.
Cooling System17.6 qt16.7 L
Engine Oil with Filter6.0 qt†5.7 L†
Fuel Tank
Regular26.0 gal98.4 L
Extended31.5 gal119.2 L
7-115
Page 562 of 616
ApplicationCapacities
EnglishMetric
Transmission Fluid (Pan Removal and Replacement)6.0 qt5.7 L
Transfer Case Fluid1.5 qt1.4 L
Wheel Nut Torque140 lb ft190Y
All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual.Recheck fluid after filling.†Oil filter should be changed at every oil change.
Engine Specifications
EngineVIN CodeTransmissionSpark Plug Gap
6.2L V8FAutomatic0.040 in (1.02 mm)
7-116
