2010 AUDI S8 jacking

Instruments and warning/indicator lights
For more information::::;, page 328 . •
Malfunction Indicator Lamp (MIL) >
The Ma lfunction Indicator Lamp (MIL) is part of the On-Board D iag­
nostic (OBD II) system . T he symbol lights up when the ignition is
turned on and will turn off after the engine has started and has
sett led at a constan t idle speed. Th is indicates that the MIL is working
properly .
The warning light illuminates when there is a malfunction in the
engine electron ic system. Contact your authorized Audi dealer and
have the malfunction corrected .
An improperly closed fuel filler cap may also cause the MIL light to
illuminate::::;,
page 285.
For more information ::::;, page 25. •
Safety belts~
This warning/indicator light reminds you to put on your
safety belt.
Th e 4,.. warning/ind icator light ill uminates when the igni tion is
switched on to remind the driver and any front passenger to put on
the safety belt. Additionally , an acoustic warning (gong) will a lso
sound .
For more Information ::::;,
page 197, "Safety belt warning light~"-•
Adaptive Air Suspension --1""::)
The warning/indicator light .... illuminates, when the jacking mode
has been activated::::;, page 179. This warn ing/i ndicator light has the
following functions: •
It illuminates for a few seconds after the ignition is turned on as
function check and then goes out.
• If the warning/ind icator light illuminates steadi ly, there is a
system fault in the Adaptive A ir Suspens ion. A system fault can result
in limited ride comfort and
low ground clearance. The fault should be
corrected as soon as possible by an authorized Audi dealer.
• If the warning/indicator light flashes, you should not drive the
vehicle . The flashing wa rning/ind icator light points to an extreme
H igh level. A very
pronounced lifting of the veh icle (extreme High
level) can resu lt, for examp le, when a heavy load is removed from the
vehicle . As soon as the level has returned to normal, the
warning/indicator light stops flashing, and you can drive away.
• If the warning/ind icator light flashes in conjunction with the~
wa rning/indicator light, you shou ld not drive off immediate ly in o rder
to prevent damage to the underbody . The two warning/indicator
lights flashing together points to an extreme Low level. A very
pronounced lowering of the veh icle (extreme Low level) can result,
for examp le, from a heavy load. As soon as the level has returned to
normal, the warning/indicator lights stop flash ing, and you can drive
away .
0 Note
If the warning/ind icator light flashes in conjunction with the~
warning/ind icator light, you should not drive the vehicle because low ­
lying vehicle parts can bottom out as you drive over uneven ground
and be damaged as a result .•
Adaptive Air Suspension~
The~ symbol illuminates fo r a few seconds after you have switched
on the ignition to indicate
reduced ground clearance when the
dynamic mode is activated and when the ignition is switched on with
a vehicle which was parked in dynamic mode::::;,
page 177, "Chassis
Controls". On vehicles which are equipped with the
sport suspension _,.,

IIIJIL_...!.A~d~a:!.!p~t!_;iv~e~A~ir~S~u~s~p~e:!n.!:s~io~n~ -----------------------------------------
Adaptive Air Suspension
Adaptive Air Suspension and
Damping
Description
Adaptive Air Suspension and damping can be regulated and they adapt automatically to a request from the
driver and the drivin g situati on at the time.
Adaptive Air Suspens ion is an e lectron ically controlled springing and
damping system. This chass is system makes it eas ie r on the d river by
adapting to the particular situation t hrough imperceptible contro l
processes.
T he
Adapt ive Air Su spen sion component regu lates ground clea rance
depending on vehicle speed, load condition and driver input. Acce le r·
a ting to a speed above a predetermined limi t will make the vehicle
lower itself. On the other hand, driving more slow ly results in the
vehicle raising aga in at spe cific speeds .
Th e
damping component provides individua l contro l of the damping
forces. For example, with damp ing characte rist ics set to provide
greater comfort, damp ing is set som ewhat harder for a br ief period
only as req uired, for example, whe n going around a curve or over
roug h road surfaces as we ll as when bra king.
Settings
Adaptive Air Suspension provides the drive r with the opportu nity to
set the chassis characte ristics also to the ir individual preference.
W ith the dr iv in g m odes
standard, automatic and dynamic the d river
has three chassis sett ings available, ranging from comfort to sporty.
In add it io n,
lift prov ides a fourth mode whi ch can be sele cti ng fo r
dr iving over poor stretches of road =:>
page 177, "Chass is Controls".
T he modes a re set in MM I
=:> page 179.
On veh icles equipped w ith the sport su spen sion Adaptive A ir Suspen­
sion -Sport *, there is genera lly more emphasis on a sporty chassis
sett ing. Setti ngs ra nge from comfo rtable to fi rm=:>
page 178, "Spo rt
Chassis Cont rols" .
0 Note
• Whenever you park you r vehicle, always ma ke su re there is
adeq uate clea rance above and below t he ve hicle. The heig ht of the
parked veh icle ca n change as the res ult of temperature fluctuat ions,
c hanges in loa d cond ition and changes in the dr iv ing mode (ground
cleara nce) .
• M ount t he tie-down ch ains/ cables over the r unning s urfa ce
(circumfere nce) of the tires . Never secu re the vehicle by the axle, the
suspension st ruts or the front o r re ar tow line eye . For technical
reaso ns, the pressure in t he suspension struts may change dur ing the
transport and this will adverse ly affect vehicle handling.
• To prevent damage to the vehicle u nderbody, remembe r th at your
veh icle is no t an off- road vehicle, even in the lift mode. The ground
cleara nce is insufficient for this type of operation .
• If yo u are go ing to tow a tra il e r, you mus t act iv a te the trai le r oper ­
ation mode =:>
page 179 .
[I] Tips
Before you ca n ra ise your vehicle using the vehicle jack (fo r examp le ,
w hen changing a flat tire) you must activate the jacking mode
=:>
page 179 . •

____________________________________________ A_ d_a_ p ,_ t_iv _ e_ A _ i_ r _ S_ u_s_, p __ e_n _ s_ i _o_ n __ _
Setting the Driving Modes
The driving modes are set in MMI.
Fig. 1 94 MMI d isplay:
Se tti ngs
The ignition must be switched on to set the driving modes.
- Press the [ CAR]function button. The main menu
Adaptive
Air Suspension
appears::::> fig. 194.
- Select the desired mode with the control knob .
Please note that not every driving mode can be selected in every
driving situation . For examp le, it is not possible to switch to lift mode
at speeds above 50 mph (80 km/h). This mode is shown
greyed out in
the MMI display.
For additiona l information on the driving modes=>
page 177,
"Chass is Controls" . •
Jacking Mode When Changing a Flat Tire
This mode must be activated before raising the vehicle
with a vehicle jack .
Switching jacking mod e on and off
- Select: Function button [CAR]> Adaptive Air Suspension
> function button [SETUP].
Controls and equip ­
ment Safety first
-
Turn the control knob to Veh icl e jac k mode and select on
or off as desired.
The vehicle jack mode must be act ivated before changing a whee l so
that the automatic control processes for the air suspension do not
make lifting with the vehicle jack more difficult.
In the veh icle jack mode the indicator light in the instrument cluster
w v illuminates.
& WARNING
The hei ght of the parked vehi cle ca n c hange due to te mp erature
fluc tu at ions or c ha ng es in l oad .
[I) Tips
The vehicle jack mode is switched off automatically at speeds above 9
mph (15 km/h). •
Towing a Trailer
Automatic lowering is not desirable when towing a
trailer.
If you are going to tow a trailer, you must activate the tra iler
towing mode .
Switching the trail er towing mode on and off
manually
- Select: Function buttont( CAR]> function button [SETUP].
- Select Trailer towing mode on or off as desired .
Level Adjustm ent when T ow ing a Trail er
The following applies to vehicles with Adaptive Air Suspension:
Vehicle care Technical data

What do I do now? -____________________ .:..::......:..:...___Wi'.'11
- Disengage and lower the floor panel before you close the
luggage compartment lid again.
Storing the replaced wheel
-Place the replaced wheel inside the spare wheel well in the
luggage compartment.
Tighten the knurled retaining screw clockwise to secure
the wheel in place.
- Disengage and lower the floor panel before you close the luggage compartment lid again.
& WARNING
Loose items in the passenger compartment can cause serious
personal injury during hard braking or in an accident.
• Never store the spare wheel or jack and tools in the passenger
compartment.
• Always store all jacking equipment, tools, and the spare wheel
in the luggage compartment.
• Tighten the knurled retaining screw for the spare wheel
securely.
[I] Tips
Check the inflation pressure of the spare tire periodically to keep the
tire ready for use .•
Safety first
Changing a wheel
Before changing a wheel
Observe the following precautions for your own and your
passenger's safety when changing a wheel.
- After you experience a tire failure, pull the car well away
from moving traffic and try to reach
level ground before
you stop ~& .
- All passengers should
leave the car and move to a safe
location (for instance, behind the guardrail)~& .
- Engage the
parking brake to prevent your vehicle from
rolling unintentionally~ &.
- Move
selector lever to position P ~ & .
- If you are towing a trailer: unhitch the trailer from your
vehicle.
- Take the
jack and the spare tire out of the luggage
compartment~
page 333 .
& WARNING
You or your passengers could be injured while changing a wheel if
you do not follow these safety precautions:
• If you have a flat tire, move a safe distance off the road. Turn
off the engine, turn the emergency flashers on and use other
warning devices to alert other motorists.
• Make sure that passengers wait in a safe place away from the
vehicle and well away from the road and traffic.
• To help prevent the vehicle from moving suddenly and possibly
slipping off the jack, always fully set the parking brake and block
the wheel diagonally opposite the wheel being changed. When
one front wheel is lifted off the ground, placing the Automatic ..,
Vehicle care Do-it-yourself service Technical data

-What do I do now? ..._ __________________________________________ _
& WARNING (conti nued)
Tra nsmissi on i n " P" ( Park) wi ll not preve nt th e vehicle from
m ov ing.
• Befor e you chan ge a wh eel, be s ure th e grou nd i s lev el and
firm . If n ece ssa ry , us e a s turdy board under th e j ack .
• Afte r in stalling the sp are whee l, make su re that you r eplace
the flat tire /wh ee l i n it s storage are a properly and t ight en th e
knu rled ret ain in g sc rew s ecu rely .
[ i J Tips
Before changing the wheel, you must activate the jacking mode, so
that the automatic contro ls for the Adaptive A ir Suspension do not
make it more difficult to
lift the vehicle with the jack=> page 179. •
Changing a wheel
When you change a wheel, follow the sequence described
below step-by-step and in exactly that order.
1. Activate the vehicle jacking mode==> page 179.
2 . Remove the decorati ve wheel cover* . For more details see
also ==>
page 33 7, "Decorative wheel covers" or
==>
page 337, "Wheels with wheel bolt caps".
3 . Loosen the
wh eel bolts ==> page 338.
4. L ocate the proper mounting point for the jack and align
the jack below that point==>
page 338 .
5. Lift the car with the jack==> page 338.
6. Remove the wheel with the flat tire and then install the
spare ==>
page 340.
7. Tighten all wheel bolts lightly . 8
.
Lower the vehicle with the jack.
9. Use the wheel bolt wrench and
firmly tighten all wheel
bolts==>
page 338.
10. Replace the decorative wheel cov er*.
11. Deactivate the vehicle jacking mode==> page 179.
& WARNING
A lw ays rea d and f ollow all W ARNING S and inf ormation => & in
" Rai sing th e vehicl e" on
page 33 8 and => pag e 341. •
After changing a wheel
A wheel change is not complete without the doing the
following .
-Store and secure the whe el you rep laced in the spare
wheel well.
- Replace the tools and the jack in their proper location.
- Check the
tire pre ssure on the spare wheel immediately
after mounting it .
- As soon as possible, have the
tighten ing torques on all
wheel bolts checked with a torque wrench . The correct
tightening torque is 90 ft lb (120 Nm).
- Have the flat tire
re placed as soon as possible .
[ i J Tips
• If you notice that the wheel bolts are corroded and diff icult to turn
wh ile chang ing a tire, they shou ld be rep laced before you check the
tightening torque. .,_

_____________________________________________ W __ h_a _ t_ d_o_ I_ d _ o_ n_o_ w_ ? _ ___._
Fig. 273 Close-up:
proper positioning of
jack
-Activate the vehicle jacking mode => page 179.
- Engage the parking brake to prevent your vehicle from
rolling unintentionally.
- Move the
selector lever to position P .
- Position the jack below the door sill under the mounting
point
that is closest to the wheel to be changed
~ page 338, fig. 272.
- Extend the
jack under the lifting point on the door sill until
its arm is positioned directly under the lifting point~ &.
- Align the jack so that its arm@=> fig. 273 engages in the
designated lifting point in the door sill and the movable
base ® lies flat on the ground. The base @ must be
vertical under the lifting point@.
- Wind the jack up further until the flat tire comes off the
ground =>& .
The jack must be installed only at the places indicated=::> page 338,
fig. 272. There is exactly
one location fo r each wheel. The jack must
not be positioned at any other location=::>& .
An unstable surface under the jack can cause the vehicle to slip off the
jack . Always provide a firm base for the jack on the ground . If neces-
Vehicle OP-eration
sary place a sturdy board or simila r support under the jack. On hard ,
slippery surfaces (such as tiles) use a rubber mat or similar to prevent
the jack from slipping=> &-
& WARNING
• You or your passengers could be injured while changing a
wheel if you do not follow these safety precautions:
-Positioning the jack under the vehicle at any other place than
those indicated above may damage the vehicle or may result in personal injuries.
- A soft or unstable surface under the jack may cause the
vehicle to slip off the jack. Always provide a firm base for the
jack on the ground. If necessary, use a sturdy board under the
jack.
- On hard, slippery surface (such as tiles) use a rubber mat or
similar to prevent the jack from slipping.
• To help prevent injury to yourself and your passengers:
-Do not raise the vehicle until you are sure the jack is securely
engaged.
- Passengers must not remain in the vehicle when it is jacked
up.
- Make sure that passengers wait in a safe place away from the
vehicle and well away from the road and traffic.
- Make sure jack position is correct, adjust as necessary and
then continue to raise the jack. •
Vehicle care Do-it-yourself service iTechnical data

lffll.___E_ m_ e_r-= g:.. e_ n_c-= y'-- s_ i_t _u _a_ t_ i_ o _ n_ s ____________________________________________ _
-Read and heed WARN ING=> &.
Fig . 29 0 Rear lift ing
poi nt
- Activa te the vehicle jacking mode if ap plicab le
=>page 179 .
- Locate lift ing poi nts=> page 353, fig . 289 => fig. 290.
- Adj ust lift ing arms of wor kshop ho ist or floor jack to
match vehicle lifting poi nts .
- Inse rt a rub ber pad between th e floor j ac k/wo rksho p hois t
and t he lifting points .
The ve hicle jacking mode mus t be activa ted so that the automa tic
adjustm ent of the Adapt ive A ir Suspens io n does not make it more
diffic ult to raise the vehicle wit h the (floor jack)=>
page 179.
If you must lift your vehicle with a floor jack to work underneath,
be sure the vehicle is safely supported on stands intended for this
purpo se.
Front lifting point
Th e lifting poi nt is loca ted on the floo r pan reinforcemen t about at
the same leve l as the jack mo unting point =>
page 353, fig. 289. Do
not lift the vehicle at the verti cal sill reinfor cement .
Rear lifting point
The li fting point is located on the ve rt ica l reinfo rceme nt of the lower
sill for the on-board jack=> fig. 290.
Lifting with vehicle jack
Refer to=> page 338.
& WARNING
• To reduce the risk of serious injury and vehicle dam age.
- Alway s lift the vehicle only at the special workshop hoist and
floor jack l ift points illustrated =>
page 353, fig. 289 and
=> fig. 290 .
- Failure to lift the vehicle at these points could cause the
vehicle to tilt or fall from a lift if there is a change in vehicle
weight distribution and balance. This might happen, for e xample , when heavy component s such as the engine block or
transmission are removed .
• When removing heavy components like these, an chor vehicle
to hoist or add correspond ing weights to maintain the center of
gravity . Otherwi se , the vehicle might tilt or slip off the hoist,
caus ing serious personal injury.
0 Note
• Be aware of th e following points before lifting th e vehicle :
-The vehicle should neve r be lifted or jacked up from under ­
neath the eng ine oil pan , the transmission housing , the front or
rear axle or the body side members . This could lead to serious
damage.
- To avoid damage to the underbody or chassis frame, a rubbe r
pad must be inserted between the floor ja ck and the lift points.
- Before driving over a workshop hoist , check that the vehicle
weight does not exceed the permissible lifting capacity of the hoist . _..

___ A_ l_,, p_ h _ a_b_ e_ t_ic _a_ l_ in_ d_e _ x ____________________________________________ _
A
Accessories ..... ...... ............. 363
Adaptive Air Suspension ............. 176
automatic mode ................. 177
Description .. ................... 176
dynamic mode ............ .... ... 1 77
Jacking mode when changing a flat tire . ..
179
lift mode ....................... 177
Setting the driving modes ......... 179
Sport Chassis Controls . ........ ... 178
standard mode ................ .. 177
Tr ailer towing mode ...... ...... .. 17 9
Warning/ind icator lights . .......... 18
Adaptive Cruise Control ............ .. 128
Changing speed ......... ......... 131
Driver information ............... 135
Dr iving in traff ic .......... ....... 129
Error messages ... .. .. .. .. ... .... 137
Open road ..... .. .... .. ... ...... 129
Override ................ .. .... .. 129
Request for driver to assume control 129
Save speed ... .. .. .. ............. 131
Setting distance . ... .......... ... 133
Sett ing time interval .............. 133
Settings ..................... ... 138
Special driving situations .......... 139
Status messages ................. 137
Switching on and off .............. 130
System limitations ........ ....... 139
Temporarily turning off ........... 132
warning/ind icator lights ........... 135 Adaptive Light .
.. ...... ....... .. .. .. 63
defect ive . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding Engine coolant ................ .. 298
Engine oil ........... ... ......... 294
W indshield washer flu id ........... 305
Additiona l accessories ............... 363
Additives Engine oil ........ .... .... .. ..... 294
Adjustable steering col1Umn ........... 117
Adjusting Front seats .................... .. 76
Instrument cluster illum ination ..... 13
Steering column ................. 117
Advanced Parking System with rear view cam-
era
Adjusting the ch imes -option 1 ..... 171
Adjusting the ch imes -option 2 ..... 172
front and back with visual disp lay and rear-
view camera ................... 161
General information .............. 161
No tes on distance iniformation ..... 170
Parking next to obstacles .......... 169
Rear-v iew camera -parking mode 1 .. 166
Rear-v iew camera -parking mode 2 .. 167
Rear-v iew camera (Rear View) ...... 164
Rear-v iew camera coverage area .... 165
Rear-v iew camera tips ............ 17 4
Special parking sit ua tions .. .. ..... 169
Switching the rear-view camera on and off
173
switching the visual disp lay on and off
173 System error message
. . . . . . . . . . . . 173
T owing hitch ... .. .. ............. 171
Air conditioning
See Climate controls .............. 103
Airbag system ... .. .......... ... 206, 226
Advanced Airbag System .......... 210
Advanced Airbag System components 213 Care .. .. ................. ...... 220
Child restraints .................. 233
Children ..... ...... .. . .. .. .. .. .. 232
Components (front a irbags) ........ 213
Danger of fitting a child seat on the front passenger seat .... ............. 208
Disposal ................. ... .. .. 220
Front airbags ................ 210,211
How do the front airbags work? ..... 215
How many airbags does my vehicle have? .
213
How the Advanced Airbag System compo -
nents work together ............ 214
Important safety instructions on the knee
airbag system ................ .. 224
Important things to know ....... .. 206
Indicator light ................... 217
Knee airbags ....... ............. 222
Monitoring .. .. ................. 217
PASSENGER AIR BAG OFF light ..... 218
Repa irs ... ........ .. . .. .. .. .. .. 220
Safety instructions ............... 219
Side airbags .. .. .... ............. 225
Side cu rtain airbags . ............. 228
Wa rning/indicator lights ... ........ 17