
Intelligent technology
'-----------------------------------------------
W inter tires
When d riving in the winter, your vehicle with A ll Whee l Drive has an
advantage, even with reg ula r tir es . In wi nter road cond it ions i t may
be advisab le to mount w inte r tires (or all-season tires) for imp roved
dr iveabili ty and braking: these tires m ust be mounted on
all four
wheels .
See also => page 323, "Winter tires".
Tire chains
Whe re tire chains are mandato ry on certa in roads, this normally also
applies to veh icles with A ll Whee l Drive=>
page 324, "Snow chains ".
Replacing wheels/tires
Veh icles with All Wheel Drive m ust always have t ires of the same size.
Also avoid tires with different trea d de pths . For details see page
=>
page 318, " N ew tires and replac ing tires a nd wheels" .
Off-Road driving?
Your Audi does not have enough ground clearance to be used as a n
off -road vehi cle. It is the re fore best to avoid ro ug h trac ks and uneven
ter rain as muc h as poss ib le. Also re fer to=>
page 263 .
& WARNING
Always adjust your dri ving to road and traffic conditions. Do not
let the extra safety afforded by All Wheel Drive tempt you into
taking ex tra risks.
• Although the All Wheel Drive is very effective, always
remember that braking capacity is l imited by tire traction. You
should therefore not drive at exce ssive speeds on icy or slippery
road surfaces.
• On wet road surfa ce s, be careful not to drive too fast because
the front wheels could begin to slide on top of the water (aqua
planing ). If this should occur, you will have no warning from a
sudden increase in engine speed as with a front-wheel drive
vehicle. Always drive at speeds which are suited to the road condi
tions - risk of crash. •
Energy management
Starting ability is optimized
Energy m ana gemen t con tr ols the distributi on of elec
trical ener gy an d thu s optimiz es the ava ila bility of elec
t ri cal ene rgy f or starting the en gine.
If a vehicle w ith a convent iona l energy system is not driven for a long
pe riod of time, t he b att ery is di sch arged by idling current con sumers
(e .g. immob ilize r). In certain c ircumstances it can result i n there
be ing insuffi cien t energy avai lab le to s tar t the engine.
I n te lligent e ne rgy management in yo ur vehicle ha ndles the dist ribu
tion of e lectrical energy . Starting ab ility is ma rkedly improved and
t he life of the battery is extended.
Basically, energy management consists of
battery diagnosis , idling
current management
a nd dynamic energy management .
Battery diagnosis
Batte ry diagnosis co nti nu ously deter mi nes the s tate of the batte ry .
Sensors determine battery vo ltage, battery current and battery
t empe rature. This determines the cur rent sta te of charge and the
power of the battery.
Idling current management
Id ling current management red uces energy consumpt ion while the
veh icle is s tanding. W it h t he ignition swi tched off, it con trol s the
energy supply to the var ious electrica l components. Data from
b attery di ag nos is is conside red .
Depe nding on the batte ry 's state of charge, individ ua l consumers a re
gradually t urne d off to prevent excessive discha rge of the batte ry an d
t hus main tain sta rting capabili ty .
Dynamic energy management
W hile the vehicle is being driven, dynamic energy management
dis trib utes the energy generated acco rding to the nee ds o f the indi -•

_____________________________________________ C_h _ e_ c_ k_in --= g'-- a_n _d_ f_i _ll _i_n -=g ::;__ ____.fflll
a service facility . The electrolyte level should also be checked each
time the battery is charged =>
page 303.
Have the batte ry checked when you take your vehicle in for serv ice .
You are well advised to rep lace a battery that is older than 5 years.
With certa in types of a irbag deployment, the ba ttery is disconnected
from the vehicle electrical system for safety reasons=>
& in "Repair,
care and disposal of the airbags" on
page 220.
Di sconne cting th e bat tery t ermina ls
Some vehicle f unct ions (power window regulators, fo r example) are
lost if the battery termina ls are disconnected . These functions have
to be re learned after the battery termina ls are connected aga in. To
prevent this, t he battery should only be disconnected from the
vehicle e lectr ica l system when absol ute ly necessary for repairs.
Vehicles not driven for long periods
If you do no t dr ive your veh icle over a period of severa l days or weeks,
electrical components are gradually cut back or switched off. Th is
red uces e nergy consumption and main tains sta rt ing capabili ty ove r a
longer period=>
page 258.
Be aware that when you unlock your vehicle, some of the convenience
functions may not operate, such as the Convenience key*, the remote
control or the power seat adjustment. The convenience functions will
be availab le aga in whe n you tur n on th e ignition and start the eng ine.
Winter operation
Dur ing the winter months, battery capac ity tends to decrease as
temperatures drop. This is because more power is also consumed
while starting, and the headlights, rear w indow defogger, etc., a re
used more often.
Avoid unnecessa ry power consum ption, part ic ula rly i n city traffic o r
when traveling only short distances. Let your authorized Audi dealer check the capacity of the vehicle battery before w inter sets in
=>
page 303 . A well charged battery will not only prevent start ing
prob lems when the wea ther is cold, but will also las t longe r.
Vehicle OP-eration
(I) Tips
If your vehicle is left standing fo r seve ral weeks at extremely low
temperatures, the vehicle battery should be removed and stored
w here it will not free ze. This will preven t it from being damaged and
having to be replaced. •
Working on the battery
Be especially careful when working on or near the
battery.
Vehicle care
Fi g. 2 49 Lugga ge
co mp artme nt: Righ t·
s ide stor age co mpar t·
me nt
Fig. 25 0 Lug gage
comp art me nt: Batt ery ~
Do-it-yourselt service iTechnical data

lffll __ C_ h_ e_c _k _i _ n _g ~ a_n _d_ f_il _l_in _ g _________________________________________ _
Battery charging (Maximum charging rate of 30
amps/14.8 Volt )
When charging at /ow voltages (e.g . w ith a trickle charger ), th e
battery cab les do not have to be disconnected first. The batte ry caps
should
not be opened when cha rging a ba ttery .
It is not necessary to remove the battery from the luggage compart
ment, and i t is also no t ne cess ary to dis connect the cables.
Fast charging the battery (charging rate above 14.8
Volts)
For technical reasons do not use a battery cha rger that uses voltage
grea te r t han 14 .8 Vol ts to ch arge yo ur vehicle's ba tte ry .
& WARNING
Charging a battery can be dangerou s.
• Always follow the operating instructions provided by the
battery charger manufacturer when charging your battery .
• Never charge a frozen battery . It may explode be cause of g as
trapped in the ice . Allow a frozen battery to thaw out first.
• Do not reu se batteries which were frozen . The battery h ousing
may have cracked and weakened when the battery froze.
• Charge the battery in a well ventilated area. Keep away from
open flame o r elect rical spark. Do not smoke. Hydrogen gas gener
ated by the battery i s explosive.
• To reduce the danger of e xplosion , never connect or disconnect
c harger cable s while the charger is operating.
• Fast charg ing a battery is dangerous and should only be
attempted by a competent technician with the proper equipment .
• Battery acid that may spill during charging should be wa shed
off with a so lution of warm water and baking soda to neutralize
the acid.
0 Note
N ever use a fast cha rger as a booster to s tart the eng ine. This w ill seri
ously damage sensitive e lectronic components , such as control units,
re lays, ra dio, etc., as well as t he ba ttery cha rger. •
Battery replacement
The new battery must have the s ame specifications and
dim ensions as the original equipment b atte ry.
Inte lligent e nergy ma nagement in yo ur vehicle is responsib le for
distr ibuting the elect rical energy throughout your vehicle
~ page 258. T he intelligent energy management sys tem will keep
the eng ine battery charged better than vehicles without this system .
T o m ake s ure the addi tional e lectr ic al energy is available o nce aga in
after you have changed the battery, we recommend that you install
b atter ies of the same type and manuf actur e only ( the same as t hose
installed at the t ime you r vehi cle was delive red) . Specifications are
liste d on the ba ttery ho using. Your a uthorized Audi dealer w ill then
code the battery management control unit.
Th e new batte ry must have the same capacity, volta ge (12 vo lts),
ampe rage, const ruct io n and p lug sealing .
When installing the battery, make s ure the ign ition and all electrical
c ons umers are turned off.
0 Note
Mak e sure the vent ilat io n hose o n the side o f th e battery is
connec ted, otherwise fumes or battery acid can leak o ut.
<£> For the sake of the environment
Because of the prob lem of proper disposal of a ba ttery, we recom
mend you r auth o rized Audi dealer change the ba ttery for you.
Ba tte ries con tain sulfu ric acid and lead and must a lways be disp osed
~

-~_T_ i_ re _ s_ a_n _ d_ w_ h _e_ e_ ls _________________________________________________ _
Groove
means the space between two adjacent tread ribs.
Load rating (code)
means the maximum load that a tire is rated to carry for a given infla
tion pressure. You may not find this information on all tires because
it is not required by law.
Maximum load rating
means the load rating fo r a tir e at the maximum permissible inflation
pressure for that tire.
Maximum loaded vehicle weight
means the sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight, and
(d) Production options weight
Maximum (permissible) inflation pressure
means the maximum cold inflation pressure to which a tire may be
inflated. Also called "maximum inflation pressure."
Normal occupant weight
means 150 lbs. (68 kilograms) times the number of occupants seated
in the vehicle up to the total seating capacity of your vehicle.
Occupant distribution
means distr ibution of occupants in a vehicle .
Outer diameter
means the overall diameter of an inflated new tire.
Overall width
means the linear distance between the exteriors of the sidewalls of
an inflated tire, including elevations due to labeling, decorations, or
protective bands or ribs.
Ply
means a layer of rubber -coated paralle l cords.
Production options weight
means the combined weight of those installed regular production
options weigh ing over 5 lbs. (2.3 kg) in excess of those standard
items which they replace, not previously considered in curb weight or
accessory weight, including heavy duty brakes, ride levelers, roof
rack, heavy duty battery, and special trim.
Radial ply tire
means a pneumatic tire in which the ply cords that extend to the
beads are laid at substantially 90 degrees to the centerline of the
tread .
Recommended inflation pressure
see=> page 307, "Cold tire inflation pressure".
Reinforced tire
means a tire design to operate at higher loads and at higher inflation
pressures than the corresponding standard tire. Reinforced t ires may
be identified as "XL ", "x l", "EXTRA LOAD", or "RF" on the sidewall.
Rim
means a metal support for a tire or a tire and tube assembly upon
wh ich the tire beads are seated .
Rim diameter
means nominal diameter of the bead seat . If you change your wheel
size, you w ill have to purchase new tires to match the new rim diam
eter .
Rim size designation
means rim diameter and width.
Rim width
means nom inal distance between rim flanges.

111.___E_ m_ e_ r-' g=- e_n_ c=-y _ s_it _ u _ a_t_ i_ o _ n_ s ______________________________________________ _
Emergency situations
General
This section is intended for trained emergency crews and personnel
who have the necessary tools and equipment to perform these
operations. •
Starting by pushing or towing
0 Note
Your vehicle is equipped with an automatic t ransmission . Conse
quently, the e ngine ca nnot be started by push ing or tow ing .•
Starting with jumper cables
I f necess ary, the engine can be started b y connectin g it to
t he bat tery of another vehicle.
If the e ng ine shou ld fa il to start because of a discharged or weak
battery, the batte ry can be connected to t he battery of
another
veh icle, us ing a pair of jumper cables to start the eng ine .
Jumper cables
Use only jumper cables of suffic iently large cross section to carry the
sta rter cur rent s afely . Refer to the m an ufa ct ur er's specificat ions.
Use only j umpe r cab les with
insulated te rmi nal clamps wh ich are
distinct ly marked :
plu s(+) cable i n most cases colored red
minus (-) cable i n most cases colored black .
& WARNING
Batterie s contain el ectricity, acid, and gas . Any of the se can cause
very serious or fatal injury. Follow the inst ructions below for safe
handling of your vehicle 's battery.
• Always shield your eyes and avoid leaning over the battery
whenev er po ssible .
• A discharged battery can freeze at temperatures just below
32 °F (0 °C ). Before connecting a jumper cable, you must thaw the
frozen battery completely, otherwise it could explode.
• Do not allow battery acid to contact eyes or sk in . Flush any
contacted area with water immedi ately .
• Improper use of a booste r battery to start a vehicle may cause
an explosion .
• Vehicle batteries generate e xplosive gases. Keep sparks, flame
and lighted cigarettes away from batterie s.
• Do not try to jump start any vehicle with a low acid level in the
battery.
• The voltage of the booster battery must also have a 12-Volt
rating. The capacity (Ah) of the booster battery should not be
lower than that of the discharged battery . Use of batteries of
different voltage or substantially different "Ah " rating may cau se
an e xplosion and personal injury.
• Never charge a frozen battery . Gas trapped in the ice may cause
an explosion.
• Never charge or use a battery that has been frozen. The battery
c ase may have be weakened .
• Use of batteries of different voltage or substantially different
capacity (Ah) rating may cause an explosion and injury . The
capacity (Ah) of the booster battery should not be lower than that
of the discharged battery. .,_

Alphabetical index Ill
----------------
Proper disposal of drained brake fluid 300
Proper disposal of dra ined engine coolant
298
Proper disposal of drained engine oil 294,
295
Recycl ing used engine o il ....... .. . 294
Unleaded fuel . ............... .. . 283
What should I do with an old battery? ...
304
EPC
See Electronic power control ........ 16
ESP
See E lectronic stabilizat ion program ( ESP)
16
Event Data Recorder (EDR) ....... .... . 252
Exhaust tail pipes
Cleaning .. ............. .. .. .. .. . 276
Expansion tank ........ .. .... .. .... . 297
F
Fan
Radiator .. ............. .. .. .. .. . 299
Fastening Booster seats ............. .. ... .. 239
Convertible child safety seats .... ... 237
Infant seats ..................... 236
Flat tire changing . .. ............. .. . 330
Floor mats .. .... .. .. ... . .. .. .. .... . 193
Fog lights Front .................... .. .. .. .. 62
Rear ........ .... .. .. .. .......... 62
Warning/indicator lights ... .. ...... 17
Folding master key with remote control .. 39
Controls and equip
ment Safety first
Foot pedals
.... ... ...... .. .. .. ... .. 192
For the sake of the environment
Gasoline fumes and the environment 285
Letting your engine warm up .. ..... 119
Reducing engine noise by early upshifting 10
Refueling ........ .. .. .. .. ....... 285
Saving fuel by early upshifting ....... 10
Using the rear window defogger ..... 113
Front airbags Description .. ..... .. .. .. .. ....... 210
How they work .... ....... ...... .. 215
Front ashtray .. .. .. ........ .......... 96
Front fog lights . ..................... 62
Front seats . .. .................. ... . 76
Adjusting .. .. .. ..... .... ...... .. 189
Child restraints in the front seat .. .. 208
Convenience side view .. .. .. .. ...... 81
Pockets ............... .. .. .... .. 100
Symmetrical seat positions .......... 81
Frontal collisions and the laws of physics 198
Fuel Additives .. .. .... .... ........... 283
Average consumption .. ............ 36
Blended gasoline .... .. .. .. ....... 283
Fuel filler neck .. ..... ...... ...... 284
Fuel gauge . ........ ......... ..... 12
Gasoline ... .. ... ........ ........ 283
Gasoline additives ................ 284
Instantaneous fuel consumption .... . 36
Low fuel level symbol .. .. .......... 33
Octane rating ...... .............. 283
Recommendation ................ 283 Refuelling
.. .. .. .. ... ...... ... .. 285
Reserve ......... ........ ... .. ... . 12
Tank capacity . . . . . . . . . . . . . . . . 12, 360
Unlocking the fuel filler flap by hand . 287
Fuse arrangement ............ .. .. .. . 342
G
Garage door opener (Homelink ®) ...... 181
Gas discharge lamps .......... .. .. .. . 346
Gauges Engine coolant temperature ......... 10
Fuel gauge .. .. ... ................ 12
Speedometer ....... ...... .. . ... .. 12
Tac hometer ..... .. ............... 11
Tr ip odometer ............ .... .. .. 12
General illustration Instruments and controls .. ... . ... .. . 9
Generator Warning/indicator lights ... ... . .. .. 16
Glossary of tire and loading terminology 307
Glove compartment ... .... ...... ..... 99
cd changer .. .. .. .. .. .. ... ....... . 99
Owner's Literature ................ . 99
Gross Vehicle Weight Rating (GVWR) ... 357
H
Head restraints ..................... 191
Adjusting .......... ...... .. .... . 191
Comfort head restraints ............ 81
Front seats .. ...... ............... 81
Rear seats .. .. .. .. .. .. .. ..... .... 82
Vehicle operation Vehicle care Do-it-yourself service Technical data