2010 Acura TL buttons

Î
Î Store a driving position only when
the vehicle is parked.
Your vehicle has a memory feature
f or the driver’s seat and outside
mirror positions.
Seat, except f or power lumbar, and
outside mirror positions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button or
using the appropriate remote
transmitter or the keyless access
remote (Driver 1 or Driver 2).
Adjust the seat to a comfortable
position (see page ).
Adjust the outside mirrors f or best
visibility (see page ).Press and release the SET button
on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver’s seat and
outside mirrors are now stored.
Turn the ignition switch to the
ON (II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pages and . 3.
1.
2.
162
155
:
178 181
Storing a Driving Position in
Memory
Driving Position Memory System
164
MEMORY BUTTONS
SET BUTTON
09/07/29 17:09:58 31TK4610_169
2010 TL

Fail to press a memory button
within 5 seconds.
Readjust the seat position.
To cancel the storing procedure
af ter pressing the SET button, do
any of the f ollowing:
Readjust the outside mirror
position. To select a memorized position, do
this:
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
Change the power mode out f rom
ON. Turn the ignition switch out from
the ON (II) position. Make sure the parking brake is set
and the shif t lever is in Park
(automatic).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
1.
2.
CONT INUED
On models without keyless access
system
On models with keyless access system
Driving Position Memory System
Selecting a Memorized Position
Inst rument s and Cont rols
165
MEMORY BUTTONS
09/07/29 17:10:11 31TK4610_170
2010 TL

Some larger styles of sunglasses
may not f it in the holder.
You may also store small items in
thisholder.Makesuretheyare
small enough to let the holder close
and latch, and that they are not
heavy enough to cause the holder to
pop open while driving.Touseacoathook,slideitout
slightly, then pull it down.
Make sure the coat hook is pulled up
when you are not using it. This hook
is not designed f or large or heavy
items.
Your vehicle has the light control
buttons on the f ront ceiling. With
these buttons, you can select three
positions: OFF, Door (door activated
position), and ON. To select a
position, press the appropriate
button.
When you press the DOOR button,
the green indicator in the button
comesonasareminder.
CONT INUED
Interior Convenience Items, Interior L ights
Coat Hook
L ight Control Buttons
Inst rument s and Cont rols
211
COAT HOOK Front
DOOR ACTIVATED ON
OFF
09/07/29 17:18:05 31TK4610_216
2010 TL

´µÎ
Turn on the f ront individual map
lights by pushing each map light
button ( / ). Push the
button again to turn it off. When the
door activated position is selected
with the light control button, the rear
map lights can be turned on by
pushing each map light button
( / ). Push the button
again to turn it off.If any map light is lef t on when the
ignition switch is turned of f or the
VEHICLE OFF (LOCK) mode is set,
and all doors are closed, it will turn
of f when the vehicle is locked with
the remote transmitter (the keyless
access remote on models with
keyless access system), or af ter 15
minutes.
Thecourtesylightscomeonwhen
the parking lights are turned on. To
adjust its brightness, press either of
the instrument panel brightness
control buttons ( or ) with the
ignition switch in the ON (II)
position.
CONT INUED
Interior Lights
Individual Map L ights Courtesy L ights
Inst rument s and Cont rols
213
Front
Rear COURTESY LIGHTS
09/07/29 17:18:34 31TK4610_218
2010 TL

Climate Control System
216
AIR CONDITIONING BUTTONRECIRCULATION BUTTONREAR WINDOW DEFOGGER/
HEATED MIRROR BUTTONPASSENGER’S SIDE MODE
CONTROL BUTTON
WINDSHIELD DEFROST
BUTTON
ON/OFF BUTTON
SYNC BUTTON DISPLAY PASSENGER’S SIDE DISPLAY
DRIVER’S SIDE DISPLAY
FAN CONTROL BUTTONS
DRIVER’S SIDE TEMPERATURE
CONTROL SWITCH
PASSENGER’S SIDE
TEMPERATURE CONTROL
SWITCH
Models without navigation system
DRIVER’S SIDE AUTO BUTTON PASSENGER’S SIDE AUTO
BUTTON
U.S. model is shown. DRIVER’S SIDE MODE
CONTROL BUTTON
09/07/29 17:19:02 31TK4610_221
2010 TL

Climate Control System
Features
217
AIR CONDITIONING BUTTONRECIRCULATION BUTTONREAR WINDOW DEFOGGER/
HEATED MIRROR BUTTONPASSENGER’S SIDE MODE
CONTROL BUTTON
WINDSHIELD DEFROST
BUTTON
ON/OFF BUTTON
SYNC BUTTON PASSENGER’S SIDE DISPLAY
FAN CONTROL BUTTONS DRIVER’S SIDE MODE
CONTROL BUTTON CENTER
DISPLAY
DRIVER’S SIDE DISPLAY
DRIVER’S SIDE TEMPERATURE
CONTROL SWITCH PASSENGER’S SIDE TEMPERATURE
CONTROL SWITCH
DRIVER’S SIDE AUTO BUTTON
PASSENGER’S SIDE AUTO BUTTON
Models with navigation system
U.S. model is shown.
09/07/29 17:19:08 31TK4610_222
2010 TL

For your saf ety, make sure you have
a clear view through all the windows
bef ore driving.
When the indicator in thebutton is on, the SYNC
indicator also comes on. The f ront
passenger’s temperature cannot be
set separately f rom the driver’s.
Your vehicle has two temperature
control switches and two mode
control buttons, one f or the driver,
and one f or the f ront passenger.
Thedriver’ssideandthepassenger’s
side temperature and mode can be
controlled independently.
Climate Control System
Dual Temperature and Mode
Control
222
DRIVER’S SIDE
TEMPERATURE
CONTROL SWITCH
SYNC BUTTON PASSENGER’S SIDE
TEMPERATURE
CONTROL SWITCH
U.S. model with navigation system is shown. DRIVER’S SIDE
MODE CONTROL
BUTTON
PASSENGER’S
SIDE MODE
CONTROL
BUTTON
09/07/29 17:20:19 31TK4610_227
2010 TL

Most audio system f unctions can be
controlled by standard buttons, bars,
and knobs. In addition, you can
access some f unctions by using the
selector knob on the audio system.The knob turns lef t and right. Use it
to scroll through lists, or to make
selections or adjustments to a list or
menu item on the display. When you
make a selection, push the center of
the selector (ENTER) to go to that
selection.
When the audio system is in XM
Radio mode or playing discs, pushing
the selector (ENTER) knob switches
the display between the normal
display and the extended display.
The extended display has three
segments to display the detailed
inf ormation.
To select any setting such as the
clock or sound adjusting, press the
SETUP button. To use any audio
system f unction, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position. You can select the
item by turning the selector knob.
To go back to the previous display,
press the RETURN button.
Pressing the SETUP button again
will also cancel the setup display
mode.
When you unlock the doors with
your remote transmitter and turn the
audio system on with the ignition
switch in the ACCESSORY (I) or ON
(II) position, the driver’s ID (Driver
1orDriver2)isdetected,andthe
radio presets and sound level
settings (see page ) are turned to
the respective memorized mode
automatically.
233
Selector K nob
SET UP Display
Personalization Setting
Audio System (Models without navigation system)
226
RETURN
BUTTON SELECTOR
KNOBSETUP BUTTON
09/07/29 17:20:57 31TK4610_231
2010 TL