Page 42 of 341
Manual air conditioning
1. Temperature adjustment
Turn the dial to select a
position between blue (cold) and red (hot) so as to adjust the temperature to your requirements.
2 . A i r fl o w a d j u s t m e n t
This dial is used to increase or decrease the speed of the air booster fan.
3. Air distribution adjustment
This dial is used to arrange the distribution of air in the passenger compar tment by combining several air outlets.
If you place the air flow control in position 0 , the system is deactivated. However, a slight flow of air, due to the movement of the vehicle, can still be felt.
Turn the dial from position 1 to position 5 to obtain a comfor table air flow.
Windscreen and side windows.
Windscreen, side windows and footwells.
Footwells.
Central and side vents.
The air distribution can be adapted by placing the dial in an intermediate position.
Page 44 of 341
Dual-zone digital air conditioning The air conditioning system operates when the engine is running.
Automatic operation
1. Automatic comfort programme
We recommend the use of one of the three AUTO modes available: they provide optimised regulation of the temperature in the passenger
compar tment according to the comfor t value that you have chosen. These three modes automatically adjust the air flow, according to the desired setting, while also maintaining the desired comfor t value.
Press the "AUTO" button repeatedly: - a first indicator lamp comes on; the "light" setting mode is selected, - a second indicator lamp comes on; the "medium" setting mode is selected, - a third indicator lamp comes on; the "intense" mode setting is selected.
When the engine is cold, the air flow will reach its optimum level
progressively, taking account of the weather and the desired comfor t level so as to avoid too great a distribution of cold air. On entering the vehicle, if the interior temperature is much colder or warmer than the comfor t value, there is no need to change the value displayed in order to obtain the comfor t required. The system corrects the difference in temperature automatically and as quickly as possible.
This system is designed to operate effectively in all seasons, with the windows closed.
Page 47 of 341
83Comfort
S w i t c h i n g t h e s y s t e m o f f
Turn the air flow control to the left until all of the indicator lamps go off.
This switch does not operate the air conditioning, only the air fan. When the "REST" function is activated, you cannot modify the temperature, air flow and distribution settings: these are controlled automatically according to the ambient temperature. This function is not available in the STOP mode of Stop & Star t.
Avoid prolonged operation in interior air recirculation mode or driving for long periods with the system off (risk of
condensation and deterioration of air quality).
O n s w i t c h i n g o n t h e e n g i n e - The control screens come on: the function is available. - Pressing the REST button activates the ventilation for a few minutes. Activation of the function is confirmed by the display of two dashes in the control screens and four air flow level indicator lamps. - The function can be deactivated and reactivated if the control screens are on. - The screens go off at the end of this period.
O n s t o p p i n g t h e e n g i n e - While the control screens remain on: the function is available. - Pressing the REST button activates the ventilation for a few minutes. Activation of the function is confirmed by the display of two dashes in the control screens and four air flow level indicator lamps. Locking the vehicle has no effect on this function. - The control screens go off at the end of this period. Pressing again before the end of the period interrupts off the ventilation definitively: the control screens go off and the function is no longer available.
This action switches off the air conditioning and the ventilation. Temperature related comfor t is no longer assured but a slight flow of air, due to the movement of the vehicle, can still be felt. Modify the settings (temperature, air flow or air distribution) or press the "AUTO" button to reactivate the system with the values set before it was switched off.
Page 57 of 341
91Comfort
These have one position for use (up) and a stowed position (down). They can also be removed. To remove a head restraint: release the backrest using control 1 , tilt the backrest 2 slightly for wards,
pull the head restraint upwards to the stop, then, press the lug A .
R e a r h e a d r e s t r a i n t s
Never drive with the head restraints removed; they must be in place and correctly adjusted.
Steering wheel adjustment
W h e n s t a t i o n a r y , pull the control lever to W h e n s t a t i o n a r y W h e n s t a t i o n a r yrelease the steering wheel. Adjust the height and reach to suit your driving position. Push the control lever to lock the steering wheel.
As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Page 58 of 341
91Comfort
These have one position for use (up) and a stowed position (down). They can also be removed. To remove a head restraint: release the backrest using control 1 , tilt the backrest 2 slightly for wards,
pull the head restraint upwards to the stop, then, press the lug A .
R e a r h e a d r e s t r a i n t s
Never drive with the head restraints removed; they must be in place and correctly adjusted.
Steering wheel adjustment
W h e n s t a t i o n a r y , pull the control lever to W h e n s t a t i o n a r y W h e n s t a t i o n a r yrelease the steering wheel. Adjust the height and reach to suit your driving position. Push the control lever to lock the steering wheel.
As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Page 61 of 341
R e a r v i e w m i r r o r
Adjustable mirror providing a central rear ward view. Equipped with an anti-dazzle system, which darkens t he mirror glass: this reduces the nuisance to the driver caused by the headlamps from following vehic les, low sun...
M a n u a l d a y / n i g h t m o d e l
Adjustment
Adjust the mirror so that the glass is directed correctly in the "day" position.
D a y / n i g h t p o s i t i o n
Pull the lever to change to the "night" anti-dazzle position. Push the lever to change to the normal "day" position.
By means of a sensor, which measures the light from the rear of the vehicle, this system automatically and progressively changes between the day and night uses.
A u t o m a t i c d a y / n i g h t m o d e l
In order to ensure optimum visibility during your manoeuvres, the mirror lightens automatically when reverse gear is engaged.
As a safety measure, the mirrors should be adjusted to reduce the "blind spot".
Page 63 of 341
99Access
Complete unlocking using the key
Selective unlocking using the key
Each unlocking is confirmed by rapid flashing of the direction indicators for approximately two seconds. According to the version of your vehicle, the door mirrors unfold at the same time. It also brings on the timed operation of the welcome lighting, the cour tesy lamps and exterior side spotlamps for around 30 seconds.
Selective unlocking of the boot
Press this button to unlock the boot. The doors remain locked.
If selective unlocking of the boot is deactivated,
pressing this button also unlocks the doors.
Programming
The complete or selective unlocking parameter is set via the vehicle configuration menu. Only selective unlocking of the boot is activated by default.
Turn the key for wards in the driver's door lock to unlock the vehicle completely.
Turn the key towards the front in the driver's door lock once to unlock the driver's door only. Turn the key towards the front in the driver's door lock again to unlock the other doors and the boot.
Page 64 of 341
Normal locking using the remote
control
Normal locking using the key
Turn the key towards the rear in the driver's door lock to lock the vehicle.
Press the closed padlock to lock the vehicle. If one of the doors or the boot is still open, the central locking does not take place. When the vehicle is locked, if it is unlocked inadver tently, it will relock automatically after thir ty seconds unless a door is opened.
The folding and unfolding of the door mirrors using the remote control can be deactivated by a CITROËN dealer.
Locking is confirmed by fixed lighting of the direction indicators for approximately
two seconds. According to version, the door mirrors fold at the same time. It also brings on of the timed operation of the exterior side spotlamps and the guide-me-home lighting, if this is activated.
