2009 TOYOTA TUNDRA phone

384 3-4. Using the hands-free phone system (for cellular phone)
Setting voice guidance volume
Select “(GUIDANCE VOL)” by using .
Change the voice guidance volume.
To decrease the volume: Turn counterclockwise.
To increase the volume: Turn clockwise.
Initialization Select “(INITIALIZE)” and then “(CONFIRM)” by using .
Select “(CONFIRM)” by using again.

385
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior and exterior features
■When the phone book is locked
The following functions cannot be used:
●Dialing by inputting a name
● Speed dialing
● Dialing a phone number stored in the call history memory
● Using the phone book
■ Initialization
●The following data in the system can be initialized:
• Phone book
• Outgoing and incoming history memory
• Speed dial data
• Registered cellular phone data
•PIN
● Once the initialization has been completed, the data cannot be restored.

386
3-4. Using the hands-free phone system (for cellular phone)
Using the phone book
Adding a new phone numberThe following methods can be used to add a new phone number:
● Inputting a phone number by using a voice command
● Transferring data from the cellular phone
● Selecting a phone number from outgoing or incoming history mem-
ory
● Inputting a phone number by using
■ Adding procedure
Select “Add entry” by using a voice command or .
To enter the menu of each setting, follow the steps below:●Adding a new phone number
1. “Phone book”  2. “Add entry”
● Changing a registered name
1. “Phone book”  2. “Change name”
● Listing the registered data
1. “Phone book”  2. “List names”
● Setting speed dial
1. “Phone book”  2. “Set speed dial (SPEED DIAL)”
● Deleting registered data
1. “Phone book”  2. “Delete entry”
● Deleting speed dial
1. “Phone book”  2. “Delete speed dial (DEL SPD DIAL)”

387
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior and exterior features
Use one of the following methods to input a phone number:
Inputting a phone number by using voice commands
STEP2-1 Select “By voice” by using a voice command or
.
STEP2-2 Press , say the desired phone number, and select “Confirm” by using a voice command.
Transferring data from the cellular phone STEP2-1 Select “By phone” and then “Confirm” by using a
voice command or .
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone for
the details of transferring data.
STEP2-3 Select the data to be registered by either of the fol- lowing methods:
a. Say “Previous” or “Next” until the desired data isdisplayed, and select “Confirm” by using a voice
command or .
b. Select the desired data by using .

388 3-4. Using the hands-free phone system (for cellular phone)
Selecting a phone number from outgoing or incoming history mem-
ory
STEP2-1 Select “Call history” by using a voice command or
.
STEP2-2 Select “Outgoing” or “Incoming” by using a voice
command or .
STEP2-3 Select the data to be registered by either of the fol- lowing methods:
a. Say “Previous” or “Go back” until the desireddata is displayed, and select “Confirm” by using
a voice command or .
b. Select the desired data by using .
Inputting a phone number by using
STEP2-1 Select “(MANUAL INPUT)” by using .
STEP2-2 Input a phone number by using , and press
once again.
Input the phone number one digit at a time.

389
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior and exterior features
Select the name to be registered by either of the following
methods, and select “Confirm” by using a voice command or
:
a. Press and say the desired name.
b. Select “(RECORD NAME)” by using , and say the desired name.
Select “Confirm” by using a voice command or
again.
In , selecting “Set speed dial (SPEED DIAL)” instead of
“Confirm” registers the newly added phone number as speed dial.
Setting speed dial Select “Set speed dial (SPEED DIAL)” by using a voice com-
mand or .
Select the data to be registered as speed dial by either of the
following methods:
a. Press , say the desired phone number, and select
“Confirm” by using a voice command or .

390 3-4. Using the hands-free phone system (for cellular phone)
b. Press , and say “List names”. While the desired name
is being read aloud, press , and select “Confirm” by
using a voice command or .
c. Select the desired data by using .
Select the desired preset butt on, and register the data into
speed dial by either of the following methods:
a. Press the desired preset button, and select “Confirm” by
using a voice command or .
b. Press and hold the desired preset button.
Changing a registered name
Select “Change name” by using a voice command or .
Select a name to be changed by either of the following meth-
ods.
a. Press , say the desired name, and select “Confirm”
by using a voice command or .
b. Press , and say “List names”. While the desired name is read aloud, press .

391
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior and exterior features
c. Select the desired name by using .
Select “(RECORD NAME)” by using .
Say a new name, and select “Con firm” by using a voice com-
mand or .
Deleting registered data
Select “Delete entry” by using a voice command or .
Pattern A Select data to be deleted by either of the following methods,
and select “Confirm” by using a voice command or :
a. Press , and say the name of the desired phone num-
ber to be deleted.
b. Press , say “List phones”. While the name of the
desired phone number is being read aloud, press .
Pattern B
Select data to be deleted by using , and select
“(CONFIRM)” by using .