2009 TOYOTA 4RUNNER maintenance

413
4-3. Do-it-yourself maintenance
4
Maintenance and care
16 ACC
7.5 APower outlets, outside rear view
mirrors, audio system, navigation
system, shift lock control system,
instrument panel lights, rear seat
entertainment system
17 CIG 10 A No circuit
18 POWER 30 A Power windows, electric moon roof
■ After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. ( P. 415)
● If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
■ If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
■To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
●Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
● Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
● Do not modify the fuse or the fuse box.
FuseAmpereCircuit

414 4-3. Do-it-yourself maintenance
NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.

415
4-3. Do-it-yourself maintenance
4
Maintenance and care
Light bulbs
You may replace the following bulbs yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perfor m, contact your Toyota dealer.
For more information about replacing other light bulbs, contact your
Toyota dealer.
■ Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. ( P. 480)
■ Front bulb locations
Headlight high beam
Parking and front
side marker lightHeadlight low beamFront turn
signal light
Front fog light
(if equipped)

416 4-3. Do-it-yourself maintenance
Replacing light bulbs■ Headlights
Turn the bulb base counterclock-
wise.
High beam (inside)
Low beam (outside)
■Rear bulb locations
High mounted
stoplight
(vehicles without
rear spoiler)
Rear turn signal light
License plate lightBack-up light

417
4-3. Do-it-yourself maintenance
4
Maintenance and care
Unplug the connector while
depressing the lock release.
■ Front fog light (if equipped)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.

418 4-3. Do-it-yourself maintenance
■Parking and front side marker lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.

419
4-3. Do-it-yourself maintenance
4
Maintenance and care
■
Front turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.

420 4-3. Do-it-yourself maintenance
■Rear turn signal and back-up lights
Open the back door and remove
the cover.
Using a flathead screwdriver or
equivalent which is wrapped with
a cloth.
Turn the bulb bases counter-
clockwise.
Rear turn signal light
Back-up light
Remove the light bulb. Rear turn signal light
Back-up light