Radio2
Radio
Radio - Overview
Left button
− switching on and off (pressing)
− Volume control (rotate)
Right button
− manual station finding, select the track in CD mode (rotate)
− fast station finding in current waveband, scroll through the contents of the CD (press)
− Calling up the menu Setup (press for some considerable time)
− other function settings in various menus (rotate)
Station keys -
− store and select the RDS station
− CD selection
− Enter code
Button to activate the CD mode
Button
− fast station finding
− Pre-winding the title in the CD mode
Button
− fast station finding
− Pre-winding the title in the CD mode
Button switching over be tween the wavebands AM/FM
Button for activating the traffic information mode
Button automatically stores the station
Button for adjusting the sound
Reception of traffic reports activated
Current waveband FM1/AM1 (memory spaces 1 - 6) or FM2/AM2 (memory spaces 7 - 12)
Selected station key
Name or frequency of the selected radio station
Important information
Warranty
The same warranty terms apply for the equipment as for new vehicles.
After the expiration of the warranty, a unit in need of repair will be replaced inex- pensively with a reconditioned, original unit with spare part warranty. However it is required that there is no housing dama ge and no unauthorised repair attempts have been made.
Note
A damage in the sense of the warranty must not be the result from improper handling of the system or from unprofes sional repair attempts. In addition, no external damage must be present.
Radio mode
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in su ch a way that acoustic signals from the outside, such as e.g. a Martins horn from utility vehicles (police cars, ambulances and fire brigade), can be heard at any time.
Power output
4x20 W
A1
A2
A316
A4CD
A5
A6
A7AM/FM
A8TP
A9AS
A10
A11
A12
A13
A14
s2e0.5.book Page 2 Wednesday, May 2, 2007 9:14 AM
Radio3
WARNING
Please always pay full attention to the traffic situation around you! As the driver you are fully responsible for the traffic safety. Only use the functions in such a way that you always maintain the control over your vehicle in all traffic situations!
Using the display
Carefully handle the display because dent s and scratches can occur through pres- sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cl oth and finger marks can be wiped away with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience co ding. If the radio is being operated for the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the batte ry, first of all switch on the ignition and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cl uster. Through this it is automatically decoded (convenience coding). A manual entry of the code is normally not necessary.
Enter code
– Switch on the radio if the ignition is on. SAFE is displayed and then
1000 .
– Enter the safety code using the station keys - .
– Confirm the safety code by pressing the station key .
If you have confirmed a wrongly entered co de, you can repeat once again the entire process.
If the code number is entered incorrectl y for the second time, the unit will be blocked for approx. one hour. It is only po ssible to repeat the entry of the safety code after an hour has expired and while the unit is switched on and the ignition key remains in the ignition lock.
The cycle - two attempts, blocked for an hour - furthermore applies.
Basic setting
Switching the unit on and off
– The system is switched on or off by pressing the rotary/push knob .
If the key is pulled out of the ignition lock when the system is switched on, the system switches off automatically. You can switch on again the unit by pressing the rotary/push knob . If the engine is switch ed off, the unit (protection of the vehicle battery before discharging) switches of f automatically after approx. one hour.
14
6
A1
A1
s2e0.5.book Page 3 Wednesday, May 2, 2007 9:14 AM
Radio6
•Depending upon the quality of the received signal, the radio needs a specific time, in order to correctly read all the illustrated characters.
Tra f f i c re p o r t s
Activating and deactivating the traffic information
Press the button , TP appears in the display. If a set radio station does not transmit a traffic report, the radio searches for a station which transmits the traffic report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on the display.
An incoming traffic report au tomatically interrupts the CD play function or listening to a radio station, which at that moment is not transmitting a traffic report. INFO and the name of the current radio station is displayed on the display. At the end of the traffic report, the radio automatically returns to the original play function.
If you wish to deactivate the traffic in formation, press once again the button , TP goes out on the display.
External CD changer
Mode of the external CD changer
Your radio can be equipped with an original CD changer which can be
installed in your vehicle.
Selecting CD mode
– Start the play function of the ex ternal CD changer by pressing the
button .
– Select a CD with a station key .
Select track
– During the CD play function turn th e button to the left or to the
right, in order to select the previous or the next track.
– Press the button or for fast replay of the track (reverse or
forward). The play function is co ntinued after releasing the button.
Function SCAN
– Press the button , in order to scroll through the CD. The first 10
seconds of each title are played.
– In order to return to the normal mode, press once again the button
.
End the play function of the CD
– In order to end the play function of the CD and to activate the radio,
press the button . The CD remains in the unit.
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vi brations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (condensation). This can effect the CD jump or impair the play function. In such cases wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather with a soft fluffly cloth from inside to outside. In case of severe layers of dirt we recom- mend to clean the CD with a commercially av ailable CD cleaner. Also in this case do not clean the CD in the direction of a circ le but rather from inside to outside and then let it dry off.
TP
TP
CD
A3
A2
A2
A2
AM/FM
s2e0.5.book Page 6 Wednesday, May 2, 2007 9:14 AM