2009 SKODA ROOMSTER manual radio set

Radio2
Radio
Radio - Overview
Left button
− switching on and off (pressing)
− Volume control (rotate)
Right button
− manual station finding, select the track in CD mode (rotate)
− fast station finding in current waveband, scroll through the contents of the CD (press)
− Calling up the menu Setup (press for some considerable time)
− other function settings in various menus (rotate)
Station keys -
− store and select the RDS station
− CD selection
− Enter code
Button to activate the CD mode
Button
− fast station finding
− Pre-winding the title in the CD mode
Button
− fast station finding
− Pre-winding the title in the CD mode
Button switching over be tween the wavebands AM/FM
Button for activating the traffic information mode
Button automatically stores the station
Button for adjusting the sound
Reception of traffic reports activated
Current waveband FM1/AM1 (memory spaces 1 - 6) or FM2/AM2 (memory spaces 7 - 12)
Selected station key
Name or frequency of the selected radio station
Important information
Warranty
The same warranty terms apply for the equipment as for new vehicles.
After the expiration of the warranty, a unit in need of repair will be replaced inex- pensively with a reconditioned, original unit with spare part warranty. However it is required that there is no housing dama ge and no unauthorised repair attempts have been made.
Note
A damage in the sense of the warranty must not be the result from improper handling of the system or from unprofes sional repair attempts. In addition, no external damage must be present.
Radio mode
The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in su ch a way that acoustic signals from the outside, such as e.g. a Martins horn from utility vehicles (police cars, ambulances and fire brigade), can be heard at any time.
Power output
4x20 W
A1
A2
A316
A4CD
A5
A6
A7AM/FM
A8TP
A9AS
A10
A11
A12
A13
A14
s2e0.5.book Page 2 Wednesday, May 2, 2007 9:14 AM

Radio3
WARNING
Please always pay full attention to the traffic situation around you! As the driver you are fully responsible for the traffic safety. Only use the functions in such a way that you always maintain the control over your vehicle in all traffic situations!
Using the display
Carefully handle the display because dent s and scratches can occur through pres- sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cl oth and finger marks can be wiped away with pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience co ding. If the radio is being operated for the first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the batte ry, first of all switch on the ignition and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In this case, please do not hesitate to contact a Škoda Service Partner or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cl uster. Through this it is automatically decoded (convenience coding). A manual entry of the code is normally not necessary.
Enter code
– Switch on the radio if the ignition is on. SAFE is displayed and then
1000 .
– Enter the safety code using the station keys - .
– Confirm the safety code by pressing the station key .
If you have confirmed a wrongly entered co de, you can repeat once again the entire process.
If the code number is entered incorrectl y for the second time, the unit will be blocked for approx. one hour. It is only po ssible to repeat the entry of the safety code after an hour has expired and while the unit is switched on and the ignition key remains in the ignition lock.
The cycle - two attempts, blocked for an hour - furthermore applies.
Basic setting
Switching the unit on and off
– The system is switched on or off by pressing the rotary/push knob .
If the key is pulled out of the ignition lock when the system is switched on, the system switches off automatically. You can switch on again the unit by pressing the rotary/push knob . If the engine is switch ed off, the unit (protection of the vehicle battery before discharging) switches of f automatically after approx. one hour.
14
6
A1
A1
s2e0.5.book Page 3 Wednesday, May 2, 2007 9:14 AM

Radio5
CD
Play function of the CD tack (tracks) in continuous or random order. If you select PLAY , the tracks are replayed in normal order. If you select SCHFFL (Schuffle), the tracks are replayed in random order.
LO U D
In case of low volume level, the function reinforces the range of bass and treble frequencies.
Note
Each setting change is stored by changing to another menu point.
Radio mode
Waveband switch-over
Your radio is fitted with the wavebands FM and AM, in order to change, press the button for a considerable time.
In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available, in order to change, press the button briefly.
The process of searching for and storing the radio stations
Manual search
– Search the frequency of the desire d radio station by pressing the
button .
Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband
by pressing the button or .
Function SCAN
– The radio station of the current waveband is briefly played (10
seconds) by pressing the button briefly.
– This function is ended by pressing the button once again and the
current station is replayed.
Store station
– After selecting the radio station, hold the station key , on which it
should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during
which the 6 stations with the strongest signal in the memory level FM2
and/or AM2 are stored. STORE is displayed on the display. This applies
only to the wavebands FM2 and AM2.
When storing the radio stations on the station keys is finished, you can call up the desired radio station by pressing a station key .
Note
The stored radio stations are updated and stored once again by repetitively pressing the button .
Radio text
Certain radio stations transmit additi onal text information - called radio
text.
Note
•The text information must not be available to all radio stations.
AM/FM
AM/FM
A2

A2
A2
A3
AS
A3A3
AS
s2e0.5.book Page 5 Wednesday, May 2, 2007 9:14 AM