The CD changer12
Selective functions of the external CD changer
– Press the button during the CD play function.
The display shows the following functions:
MIX
Set the desired parameter by pressing the station key .
•OFF - Play function in continuous order;
•TRACK - Play function of titles in random order in a certain folder.
Note
You can call up the second level for radio settings ⇒page 5 by pressing the station key .
External sources
Your radio enables the connection of au dio units from a wide range, e.g.
portable player.
Activating an external audio source
– By repetitively pressing the button activate the external input,
AUX IN... is displayed. The play function starts automatically after
connecting the external source.
– If you wish to set the input sensitivity depending on the signal output
level of the external source, press the station key .
End play function of the external source
– Press button or . It starts the play function of the last selected
radio station.
– Press the button , in order to start the play function of the CD.
Setting of the input sensitivity
•AUX LEV 1 - high level, used in particular for notebooks;
•AUX LEV 2 - middle level, used for cassettes or CD player;
•AUX LEV 3 - low level, used for MP3 player;
Note
•Your radio has no control over the level setting of the external source. Make sure that the highest quality is achieved by a suitable combination of input sensitivity and output sensitivity of the external sour ce (volume control). You will find detailed information for this setting in the operating instructions of the units.
Technical short description
Power output
4x20 W at 14.4 V; 25°C; 10% THD (Total Harmonic Distation)
4x35 W peak power
Digital audio processor with Equa lizer according to vehicle model.
Display
Positive FSTN (Film Super Twisted Nematic)
Graphic 200x47 active points
MENU
A12
A12
CD
A12
FMAM
CD
s1uk.3.book Page 12 Wednesday, May 2, 2007 11:07 AM
