2009 RENAULT TWINGO Trim And Upholstery Workshop Manual

76A-1
REAR SEAT FRAMES AND MECHANISMS
Complete rear seat: Removal - Refitting
76A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the bolts (1) from the rear seat.
aTilt the rear seatback.aTilt the rear seat assembly by pulling on the handles
(2) .
aUnlock the seat belt (3) . Tightening torquesm
rear seat bolts21 Nm
120795
120941
120942
120797

76A-2
REAR SEAT FRAMES AND MECHANISMS
Complete rear seat: Removal - Refitting
76A
aRemove:
-the seat belt (4) and (5) ,
-the rear seat.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the rear seat,
-the seat belt.
aPosition the seat normally.
aAlways replace the rear seat bolts each time they
are removed.
aRefit the rear seat bolts (1) .
aTorque tighten the rear seat bolts (21 Nm).
120796

76A-3
REAR SEAT FRAMES AND MECHANISMS
Folding rear seat frame: Removal - Refitting
76A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the complete rear seat (see 76A, Rear seat fra-
mes and mechanisms, Complete rear seat: Re-
moval - Refitting, page 76A-1) ,
-the rear seat seatback trim (see 78A, Rear seat
trim, Rear seatback trim: Removal - Refitting,
page 78A-4) ,
-the rear seat cushion trim (see 78A, Rear seat
trim, Rear seat base trim: Removal - Refitting,
page 78A-1) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (1) ,
-the rear seat frame.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the rear seat frame on the runners,
-Always replace the rear seat frame nuts each time
they are removed.
-the nuts (1) .
aTorque tighten the rear seat frame nuts (25 Nm).
II - FINAL OPERATION.
aRefit:
-the rear seat cushion trim (see 78A, Rear seat
trim, Rear seat base trim: Removal - Refitting,
page 78A-1) ,
-the rear seat seatback trim (see 78A, Rear seat
trim, Rear seatback trim: Removal - Refitting,
page 78A-4) ,
-the complete rear seat (see 76A, Rear seat fra-
mes and mechanisms, Complete rear seat: Re-
moval - Refitting, page 76A-1) . Tightening torquesm
rear seat frame nuts25 Nm
120885

76A-4
REAR SEAT FRAMES AND MECHANISMS
Rear seat runner: Removal - Refitting
76A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the complete rear seat (see 76A, Rear seat fra-
mes and mechanisms, Complete rear seat: Re-
moval - Refitting, page 76A-1) ,
-the rear seat cushion trim (see 78A, Rear seat
trim, Rear seat base trim: Removal - Refitting,
page 78A-1) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (1) ,
-the rear seat runners.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the rear seat runners,-Always replace the rear seat runner nuts each time
they are removed.
-the nuts (1) .
aTighten to torque the rear seat runner nuts (25
Nm ).
II - FINAL OPERATION.
aRefit:
-the rear seat cushion trim (see 78A, Rear seat
trim, Rear seat base trim: Removal - Refitting,
page 78A-1) ,
-the complete rear seat (see 76A, Rear seat fra-
mes and mechanisms, Complete rear seat: Re-
moval - Refitting, page 76A-1) . Tightening torquesm
rear seat runner nuts25 Nm
120885

76A-5
REAR SEAT FRAMES AND MECHANISMS
Rear bench seatback: Removal - Refitting
76A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the rear parcel shelf (depending on the
equipment level).
aPull down the rear bench seat base.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aUnlock the rear bench seatback using the straps (1)
.
aPull down the rear bench seatback.aUnlock the rear bench seatback catches.
aRemove the rear bench seat seatback.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the rear bench seatback.
aLock the rear bench seatback catches.
aPull down the rear bench seatback.
II - FINAL OPERATION.
aPull down the rear bench seat base.
aRefit the rear parcel shelf (depending on the equip-
ment level).
121303
121302

76A-6
REAR SEAT FRAMES AND MECHANISMS
Rear bench seat base: Removal - Refitting
76A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts and washers (1) ,
-the rear bench seat base.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the rear bench seat base,
-Always replace the rear bench seat base nuts each
time they are removed.
-the nuts and washers (1) .
121308

77A-1
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting
77A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer using the Diagnostic tool
(see MR 413 Fault finding, 88C, Airbags and seat
belt pretensioners, Fault finding - Replacement
of components).
aDisconnect the battery ( (see Battery: Removal -
Refitting) ).
aRemove the complete front seat (see 75A, Front
seat frames and mechanisms, Complete front
seat: Removal - Refitting, page 75A-8) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the cover (1) .
aUnclip the seatback adjustment control. Special tooling required
Car. 1521Clip cr imping pliers.
Equipment required
Diagnostic tool
IMPORTANT
To prevent any accidental triggering whilst w orking
on or near a pyrotechnic component (airbags or
pretensioners), lock the airbag computer using the
Diagnostic tool.
When this function is activated, all the trigger lines
are inhibited and the airbag warning light on the ins-
trument panel lights up contin uously (ignition on).
IMPORTANT
Never handle the pyrotechnic systems (pretensio-
ners or airbags) near to a source of heat or naked
flame - they may be triggered.
120809
120810

77A-2
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting
77A
aRemove the elastic securing straps (2) from the
seatback trim.
aRemove the elastic securing straps (3) from the seat
base trim.aUnlock the seat base cover tensioner at (4) using a
flat-blade screwdriver.
aUnclip the clips (5) using unclipping pliers.
120811
120812120813
120831