2009 RENAULT TWINGO RS bulb

80B-13
HEADLIGHTS
Side indicator: Removal - Refitting
80B
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the side indicator (1) using a small flat-blade
screwdriver (2) .
aRemove the side indicator (1) from the bulb moun-
ting (3) by turning it a quarter of a turn anti-clockwi-
se.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aIf the side indicator bulb is replaced, use a W5W ap-
proved bulb.
aRefit the side indicator on the bulb mounting by tur-
ning it a quarter of a turn clockwise.
aFit the side indicator onto the front wing.
119384
121206

81A-3
REAR LIGHTING
Rear wing light: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
II - REMOVAL OPERATION FOR PART
CONCERNED
aDisconnect the connector (1) from the rear light on
the wing.
aRemove:
-the bolt (2) from the rear light on the wing,
-the rear light on the wing,
-the rear light bulbs on the wing (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the rear light bulbs on the wing (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) ,
-the rear light on the wing,
-the rear light bolt on the wing.
aConnect the connector for the rear light on the wing.
119533

81A-4
REAR LIGHTING
Rear light bulb: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
1 - Rear light bulbs on the wing
aRemove the rear light on the wing (see 81A, Rear li-
ghting, Rear wing light: Removal - Refitting, page
81A-3) .
2 - High level brake light bulb
aRemove the high level brake light (see 81A, Rear li-
ghting, 3rd brake light: Removal - Refitting, page
81A-6) .
3 - License plate light bulb
aRemove the license plate light (see 81A, Rear li-
ghting, Number plate light: Removal - Refitting,
page 81A-8) .
II - REMOVAL OPERATION FOR PART
CONCERNED
1 - Rear light bulbs on the wing
aUnclip the plate by pressing on the clips (1) .aRemove:
-the side light and brake light bulb (2) ,
-the indicator bulb (3) ,
-the rear fog light bulb (left rear light) or the rever-
sing light bulb (right rear light) (4) .
2 - High level brake light bulb
aRemove the high level brake light bulb (5) .
119535
119536
119534

81A-5
REAR LIGHTING
Rear light bulb: Removal - Refitting
81A
3 - License plate light bulb
aUnclip the light at (6) .
aRemove the license plate light bulb.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a
1 - Rear light bulbs on the wing
aRefit:
-the side light and brake light bulb (P21/5W),
-the indicator bulb (PY21W),
-the rear fog light bulb (left rear light) or the rever-
sing light bulb (right rear light) (P21W).
2 - High level brake light bulb
aRefit the high level brake light bulb (W16W).
3 - License plate light bulb
aRefit the license plate light bulb (W5W).II - FINAL OPERATION.
1 - Rear light bulbs on the wing
aRefit the rear light on the wing (see 81A, Rear li-
ghting, Rear wing light: Removal - Refitting, page
81A-3) .
2 - High level brake light bulb
aRefit the high level brake light (see 81A, Rear li-
ghting, 3rd brake light: Removal - Refitting, page
81A-6) .
3 - License plate light bulb
aRefit the license plate light (see 81A, Rear lighting,
Number plate light: Removal - Refitting, page
81A-8) .
121080
Note:
When replacing a bulb, only use approved bulbs.

81A-7
REAR LIGHTING
3rd brake light: Removal - Refitting
81A
aDisconnect:
-the connector (3) from the high level brake light,
-the supply pipe (4) from the rear screen washer jet.
aRemove the high level brake light (5) .
aRemove:
-the rear screen washer jet (6) (see 85A, Wiping -
Washing, Rear screen washer jet: Removal -
Refitting, page 85A-25) ,
-the high level brake light bulb (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit:
-the high level brake light bulb (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting,
page 81A-4) ,
-the rear screen washer jet (see 85A, Wiping -
Washing, Rear screen washer jet: Removal -
Refitting, page 85A-25) .
aConnect:
-the rear screen washer jet supply pipe,
-the high level brake light connector.
aRefit:
-the high level brake light,
-the blanking covers.
119532
119534

81A-8
REAR LIGHTING
Number plate light: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aSwitch off the ignition.
II - REMOVAL OPERATION FOR PART
CONCERNED
aUnclip the license plate lights at (1) with a small flat-
blade screwdriver.
aDisconnect the license plate light connectors.
aRemove the license plate light bulbs (see 81A, Rear
lighting, Rear light bulb: Removal - Refitting,
page 81A-4) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit the license plate light bulbs (see 81A, Rear li-
ghting, Rear light bulb: Removal - Refitting, page
81A-4) .
aConnect the number plate light connectors.
aClip on the number plate lights.
121082

81B-2
INTERIOR LIGHTING
Interior light: Removal - Refitting
81B
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the translucent cover at (1) using a small flat-
blade screwdriver.
aRemove the bulbs (2) .
aUnclip the courtesy lights (3) at (4) using a small flat-
blade screwdriver.
aDisconnect the courtesy lights connector.
REFITTING
aConnect the courtesy lights connector.
aClip the courtesy lights onto their mounting.
aRefit the bulbs.
aFit the translucent cover onto the courtesy lights.
121390
121389
Note:
If the bulbs are changed, use W5W approved
bulbs.

81B-5
INTERIOR LIGHTING
Luggage compartment light: Removal - Refitting
81B
REMOVAL
aUndo the luggage compartment light (1) using a
scratch awl (2) .
aDisconnect the luggage compartment lighting con-
nector.
aUnclip the bulb mounting (3) from the translucent co-
ver (4) at (5) .
aRemove the bulb.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
aRefit the bulb.
aFit the bulb mounting onto the translucent cover.
aConnect the luggage compartment light connector.
aClip the luggage compartment light onto the rear
parcel shelf side trim.
121388
121387
Note:
If the bulb is changed, use a W5W approved
bulb.