86A-12
MR-413-X44-86A000$567_eng.mif
V1
86A
RADIO
Configuration - Settings
CONFIGURATIONS
NOTE:
To select the zone in which the Tuner is to be used, press buttons 2 and 5 simultaneously while turning the power on.
Then wait approximately 2 minutes. Enter the four digit code and then:
●select the relevant zone:
–America
–Japan
–Asia
–Arabia
–Others (Europe, Africa, other)
SETTINGS
To switch to setting mode (Expert mode), press and hold (4 seconds) the source (SRC) button until you hear a
bleep. This allows you to adjust the following functions:
NR range:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for maximum regulation, 0 to disable regulation),
●Loudness mode activation.
PN range:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for maximum regulation, 0 to disable regulation),
●Loudness mode activation,
●Assisted tuner mode activation,
●configuration of the number of speakers (2 or 4),
●manual or dynamic list selection.
PN6 radio:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for maximum regulation, 0 to disable regulation),
●Loudness mode activation,
●Assisted tuner mode activation,
●configuration of the number of speakers (2 or 4),
●manual or dynamic list selection.
●activation of data storage in accordance with the RENAULT Card: CARD ON/OFF. To operate, the radio must be
accompanied by the navigation system. Note:
These configurations are not required when the secret code is entered after the power supply has been cut.
MR-413-X44-86A000$567_eng.mif
