37A-47
MECHANICAL COMPONENT CONTROLS
Parking brake lever: Removal - Refitting
37A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (6) from the parking brake lever,
-the parking brake lever (7) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the parking brake lever,
-the parking brake lever nuts.
aTorque tighten the parking brake lever nuts (8
Nm).
II - FINAL OPERATION.
aFit the floor carpet (see Floor carpet: Removal -
Refitting) (MR 412 Bodywork, 71A, Body internal
trim).
aRefit (depending on equipment level):
-the rear seats, completely (see Complete rear
seat: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners),
-the rear bench seat base (see Rear bench seat
base: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners),-the rear bench seatback (see Rear bench seat-
back: Removal - Refitting) (MR 412 Bodywork,
76A, Rear seat frames and runners).
aRefit the front seats, completely (see Complete
front seat: Removal - Refitting) (MR 412 Body-
work, 75A, Front seat frames and runners).
aAttach the parking brake cables to the compensator.
aRefit the parking brake lever adjusting nut.
aAdjust the parking brake lever (see 37A, Mechani-
cal component controls, Parking brake lever:
Adjustment, page 37A-48) .
aRefit:
-the heat shield,
-the heat shield clips.
121607
