38C-21
ANTI-LOCK BRAKING SYSTEM
Braking computer: Removal - Refitting
38C
This repair method only relates to vehicles without
ESP, equipped with TEVES brand hydraulic unit.
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02A, Lifting equip-
ment).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (MR 411, 80A, Battery).
aRemove the entire hydraulic unit (see 38C, Anti-
lock braking system, Hydraulic brake unit: Re-
moval - Refitting, page 38C-2) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the braking computer bolts (1) on the hydraulic unit,
-the braking computer (2) .
REFITTING
I - REFITTING PREPARATION OPERATION
aDo not clean the pressure modulation unit (3) . Special tooling required
Mot. 1608Torque screwdriver 1 to 6.6
N.m.
Equipment required
Diagnostic tool
Tightening torquesm
braking computer bolts3 Nm
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
121457
19113
