AUTOMATIC TRANSMISSION
Fault finding - Interpretation of statuses
23A
23A - 118V3 MR-372-J84-23A000$675.mif
AJ0 BVA
Vdiag No.: 04, 05
ET013
GEAR ENGAGED
Note:
Status ET013 "Gear engaged" is applicable to the following sub-functions:
–"Gear changes".
–"Driver parameters".
STATUS
DEFINITION1: shows that the gear engaged is 1st gear.
2: shows that the gear engaged is 2nd gear.
3: shows that the gear engaged is 3rd gear.
4: shows that the gear engaged is 4th gear.
5: shows that the gear engaged is 5th gear.
6: shows that the gear engaged is 6th gear.
R: shows that the gear engaged is Reverse gear.
INVALID: shows that the transmission ratio is incorrect.
DISENGAGE: shows that the clutch disengagement function while vehicle stationary is
active.
P/N: shows that the transmission is either in "Park" or "Neutral" mode.
NOTESSpecial notes:
This status indicates clutch disengagement when stopped ("DISENGAGEMENT"), the
various gears engaged (1, 2, 3, 4, 5, 6, "R"), the parking brake and neutral positions
("P" and "N") when a fault appears on the lever.
Conformity check with engine stopped and ignition on
1
2
3
Check (engine stopped, ignition on and brake pedal depressed), lever in position "M",
ET013 "Gear engaged" = "1", " 2" or " 3" .
In the event of a fault, consult the interpretation of faults DF067 " Lever position switch
circuit" and DF301 "Clutch 1 pressure switch circuit".
If the fault is still present, contact Techline.
AFTER REPAIRCarry out a road test, then check with the diagnostic tool.
AJ0_V04_ET013/AJ0_V05_ET013
