2009 PEUGEOT 207 display
[x] Cancel search: displayPage 134 of 279
i
126
CRUISE CONTROL
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control is switched onmanually: it requires a minimum vehicle speed of 25 mph (40 km/h), as well as the engaging:
-of fourth gear on the manual gearbox,
- of second gear with the "2 Tronic" or automatic gearbox, in sequential mode,
- of position A on the "2 Tronic" gear-box or D on the automatic gearbox.
The cruise control is switched off manu- offally or by pressing the brake or clutch pedal or on triggering of the ESP system for safety reasons.
It is possible to exceed the programmed speed temporarily by pressing the ac-celerator pedal.
To return to the programmed speed, simply release the accelerator pedal.
Switching off the ignition cancels any programmed speed value.
The controls of this system are grouped
together on stalk A .
1. Cruise control mode selection dial
2. Value decrease button
3. Value increase button
4. Cruise control off/resume button
The programmed information is grouped together on the instrument panel dis-play.
5. Cruise control off/resume indication
6. Cruise control mode selection indication
7. Programmed speed value
Steering wheel controls Displays on the instrument panel
Page 135 of 279
!
127
Programming
Turn dial 1 to the "CRUISE" po-sition: the cruise control mode is selected but is not switched on (OFF).
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed s p e e d r e s u l t s i n fl a s h i n g o f t h i s s p e e d o n t h e d i s p l a y .
Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically can- c e l s t h e fl a s h i n g o f t h e s p e e d .
Return to normal driving
Turn dial 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder.
Operating fault
In the event of a cruise control mal-function, the speed is cleared result- i n g i n fl a s h i n g o f t h e d a s h e s . C o n t a c t a PEUGEOT dealer to have the system checked.
Set the programmed speed by ac-celerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).
Switch off the cruise control by pressing button 4 : the d i s p l a y c o n fi r m s t h a t i t h a s b e e n s w i t c h e d o f f ( O F F ) .
Switch the cruise control back on by pressing button 4again.
You can then change the programmed speed using buttons 2 and 3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Page 166 of 279
!
i
157
A fl a t b a t t e r y p r e v e n t s t h e e n g i n e
from starting (refer to the corre-
s p o n d i n g p a r a g r a p h ) .
If the telephone is being used at
t h i s t i m e :
-
it will be maintained for 5 minutes
with your PC Sound hands-free kit,
- i t w i l l s t i l l b e p o s s i b l e t o fi n i s h the call with the PC Com.
ENERGY ECONOMY MODE
System which manages the duration of
use of certain functions to conserve a
s u f fi c i e n t l e v e l o f c h a r g e i n t h e b a t t e r y .
After the engine has stopped, you can
still use functions such as the audio
equipment, windscreen wipers, dipped
headlamps, courtesy lights, etc. for a
m a x i m u m c o m b i n e d d u r a t i o n o f t h i r -
ty minutes. Exiting economy mode
These functions are reactivated auto-
m a t i c a l l y n e x t t i m e t h e v e h i c l e i s d r i v e n .
In order to resume the use of these
functions immediately, start the en-
gine and let it run for a few minutes.
The time available to you will then
be double the duration for which the
engine is left running. However, this
p e r i o d w i l l a l w a y s b e b e t w e e n fi v e a n d
thirty minutes.
Switching to economy mode
Once the thirty minutes are over, a
message appears on the multi-func-
tion display indicating that the vehicle
has switched to economy mode and the
active functions are put on standby. CHANGING A WIPER BLADE Procedure for replacing a worn wiper blade with a new one without the use of tools.
Removing a front or rear wiper
blade
Raise the corresponding wiper arm.
Unclip the wiper blade and remove it.
Fitting a front or rear wiper
blade
At the front, check the size of the wiper blade as the shorter blade is fi t t e d o n t h e r i g h t - h a n d s i d e o f t h e vehicle.
Put the corresponding new wiper blade in place and clip it.
Fold down the wiper arm carefully.
Page 193 of 279
184
In an emergency, press the SOS button until a CONFIRMATION/CANCELLATION screen is displayed. A call is made * to the PEUGEOTEmergency team which receives locating information from the vehicle and can send a detailed alert to the appropriate emergency services. In countries in which the team is not operational, or when the locating service has been expressly refused, the call is directed to the emergency s e r v i c e s ( 1 1 2 ) .
PEUGEOT ASSISTANCE
CUSTOMER CALL
If the SIM card used was not supplied by PEUGEOT, we suggest that you check its compatibility by making a call to the PEUGEOTEmergency team.
Press this button to gain access to the PEUGEOT services * .
Select "Customer call" to request any information about the PEUGEOT marque.
Select "PEUGEOT Assistance" to make a breakdown assistance call.
* These services and options are subject to conditions and availability.
* This service is subject to conditions and availability.Consult a PEUGEOT dealer.
If necessary, the internal telephone is activated automattomatically to make an emergency call.
In order for an emergency call to be made, a vali d SIM cSIM card must be inserted.
EMERGENCY OR ASSISTANCE CALL using the PC Com
Page 197 of 279
188
0 2GENERAL MENU
M A P : orientation, details, display. A U D I O F U N C T I O N S : r a d i o , C D , J u k e b o x , o p t i o n s .
For maintenance of the display, the use of a soft, non-abrasive cloth ( s p e c t a c l e s c l o t h ) i s recommended without any additional product.
T E L E M A T I C : telephone, directory, SMS.
C O N F I G U R A T I O N : vehicle, display, time, languages, voice, auxiliary s o c k e t ( A U X ) p a r a m e t e r s . s o c k e t ( A U X ) p a r a m e t e r s .
V I D E O : activation, parameters.
V E H I C L E D I A G N O S T I C S : warnings log, status of the functions.
N A V I G A T I O N G U I D A N C E : GPS, stages, options.
T R A F F I C I N F O R M A T I O N : TMC information, messages.
Page 198 of 279
189
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0 2DISPLAY AND GENERAL MENU
Press the OK dial to access short-cut menus according to the display on the screen.
INTERNAL TELEPHONE:
c a l l l i s t
d i a l
p h o n e b o o k
v o i c e m a i l N A V I G A T I O N ( I F N A V I G A T I O N I S I N P R O G R E S S ) :
r e s u m e / s t o p g u i d a n c e
d i v e r t r o u t e
r o u t e t y p e
c o n s u l t t r a f fi c i n f o
z o o m / s c r o l l m a p
TRIP COMPUTER:
a l e r t l o g
s t a t u s o f f u n c t i o n s
BLUETOOTH TELEPHONE:
c a l l l i s t
c a l l
p h o n e b o o k
p r i v a t e m o d e / h a n d s - f r e e m o d e
p l a c e c a l l o n h o l d / r e s u m e c a l l
C D ( M P 3 O R A U D I O ) :
c o p y C D t o J B X / s t o p c o p y
a c t i v a t e / d e a c t i v a t e I n t r o s c a n
a c t i v a t e / d e a c t i v a t e r a n d o m p l a y
a c t i v a t e / d e a c t i v a t e r e p e a t
RADIO:
e n t e r a f r e q u e n c y
a c t i v a t e / d e a c t i v a t e R D S
a c t i v a t e / d e a c t i v a t e R E G m o d e
h i d e / d i s p l a y " R a d i o T e x t "
JUKEBOX:
s e l e c t p l a y l i s t
a c t i v a t e / d e a c t i v a t e I n t r o s c a n
a c t i v a t e / d e a c t i v a t e r a n d o m p l a y
a c t i v a t e / d e a c t i v a t e r e p e a t
USB:
c o p y U S B t o J B X / s t o p c o p y
e j e c t U S B
a c t i v a t e / d e a c t i v a t e I n t r o s c a n
a c t i v a t e / d e a c t i v a t e r a n d o m p l a y
a c t i v a t e / d e a c t i v a t e r e p e a t
DISPLAY ACCORDING TO THE CONTEXT
I N " Z O O M / S C R O L L " M O D E :
p o s i t i o n i n f o
s e l e c t a s d e s t i n a t i o n
s e l e c t a s s t a g e
s t o r e t h i s p o s i t i o n
e x i t m a p m o d e
g u i d a n c e o p t i o n
Page 205 of 279
196
2 2
3 3
4 4
1 5 5
66
77
0 3 Press the MENU button.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the
MAP function.
Turn the dial and select the
M A P I N W I N D O W o r
FULL SCREEN MAP tab.
Select OK and press the dial to
c o n fi r m .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Turn the dial and select the
D I S P L A Y M A P f u n c t i o n .
DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE
GPS
FULL SCREEN MAP
MAP IN WINDOW
DISPLAY MAPOK
Page 209 of 279
200
11
2 2
3 3
4 4
66
5 5
77
0 4
Turn the dial and select the CONFIGURE MESSAGE ANNOUNCEMENT function.
S e l e c t t h e R E A D M E S S A G E S t a b . T h e T r a f fi c I n f o r m a t i o n M e s s a g e s w i l l be read by the voice synthesiser.
S e l e c t t h e N E W M E S S A G E D I S P L A Y t a b . T h e t r a f fi c i n f o r m a t i o n m e s s a g e s a r e e x t e n d e d t o t h e fi l t e r s s e l e c t e d ( g e o g r a p h i c . . . ) a n d c a n a l s o b e displayed when guidance is not active.
Press the MENU button.
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS W e r e c o m m e n d t h a t y o u d o n o t t i c k t h e N E W M E S S A G E D I S P L A Y t a b f o r r e g i o n s w i t h h e a v y t r a f fi c .
Turn the dial and select the TRAFFIC INFORMATION function.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
TRAFFIC INFORMATION
Select OK and press the dial to c o n fi r m .
READ MESSAGES
CONFIGURE MESSAGE ANNOUNCEMENT
NEW MESSAGE DISPLAY