2009 OPEL MERIVA tow

11
In Brief
Picture no: 14727s.tif
Exterior lights Rotate
Press
Lighting 3102, headlamp warning device
3 17.
Picture no: 18475s.tif
Headlamp flash, main beam and
dipped beam Main beam, headlamp flash 3103.
Picture no: 14054h.tif
Turn signals Turn signal lamps 3103.
7
=Off
8 = Parking lamps
9 = Dipped or main beam
> =Fog lamps 3
r = Fog tail lamp
Headlamp flash = Pull stalk towards
steering wheel
Main beam = Push stalk forwards
Dipped beam = Push stalk forwards again
Right = Lever upwards
Left = Lever downwards

13
In Brief
Picture no: 14056h.tif
Operating windscreen and
headlamp washer systems
3:
Pull stalk towards steering wheel
The wipers will swipe for a few strokes.
The headlamp washer system 3 can be
operated when the lights are on.
Windscreen washer system and headlamp
washer system 3 3101, Further
information 3198, 3215.
Picture no: 14057h.tif
Rear window wiper and washer
system Rear window wash and wipe system 3101,
Wiper blades 3215, Car care 3198.
Picture no: 13992s.tif
Heated rear window, heated
exterior mirrors
3
Operated with the Ü button.
Climate control 3114, Heated rear window
3 41.
Wiper on = Push stalk forwards
Wiper off = Pull stalk towards
steering wheel
Washing = Push lever forward and hold

19
In Brief
The backrest can engage in several
positions. In addition, the backrest can be
folded all the way down to the seat when
extending the luggage compartment.
Picture no: 14728s.tif
Lower centre seat
z House centre seat belt in the holder in
the roof.
z Insert seat belts into recesses in seat
cushion.
z Slide centre seat head rest all the way
down.
z Pull release handle at rear of centre
backrest. Tilt backrest forward and
engage.
Picture no: 14730s.tif
Variant 1 with three rear seats
zAdjust backrest to centre position.
z Pull handle beneath seat. Slide seat all
the way forward, then outward toward
the door and then further forward to the
desired position.
z Release handle and allow seat to
engage in position.
z Raise centre seat.
9 Warning
To prevent injuries, always hold back
seat backrest firmly and guide
downward when folding.

20 In Brief
Picture no: 14729s.tif
Variant 2 with two rear seats, with
maximum seating space
zLower centre seat.
z Adjust backrest to centre position.
z Pull handle beneath seat. Slide seat all
the way back, then toward the centre of
the vehicle and then further rearward to
the desired position.
z Release handle and allow seat to
engage in position.
Picture no: 14716s.tif
Lower outboard seats
zPull seat belt from be lt guide at backrest.
z Fold down outboard re ar seat backrests.
z To achieve a level loading surface, pull
release handle on back of backrest and
push seat down unt il it latches into
position.
Picture no: 14125s.tif
Airbag system The airbag system consists of several
internal systems.
Front airbag system
The front airbag system will be triggered in
the event of a serious accident involving a
frontal impact and forms safety cushions
for the driver and front passenger. The
forward movement of the driver and front
passenger is checked and the risk of
injuries to the upper body and head
thereby substantially reduced.

44 Seats, InteriorSeats, Interior
Picture no: 13977s.tif
Front seats Adjust longitudinal seat position
Pull handle at front of seat, move seat and
then release handle.
Picture no: 13978s.tif
Adjusting the backrests
Take the pressure off the backrest and turn
the hand wheel on the side.
Front seats ........................................... 44
Head restraints .................................... 46
Armrest
3............................................. 48
Travel Assistant 3............................... 48
Rear seats............................................. 51
Flexible Seat System (FlexSpace) ....... 52
Luggage compartment extension ..... 53
Luggage compartment cover 3......... 55
Safety net 3......................................... 56
Lashing eyes ........................................ 57
Bag hangers 3..................................... 57
Notes on loading the vehicle .............. 58
Three-stage safety system.................. 59
Three-point seat be lts ......................... 59
Belt tensioners...................................... 60
Using the belts ..................................... 62
Mounting clips 3 for ISOFIX child
restraint systems ............................... 64
Child restraint system 3...................... 65
Airbag system ...................................... 67
Cigarette lighter 3............................... 78
Accessory sockets 3............................ 78
Ashtrays ............................................... 79
Stowage compartments ...................... 80
Foldaway tables 3.............................. 81
Coin holder 3....................................... 81
Sun visors.............................................. 81
9 Warning
Never adjust seats while driving. They
may make uncontrolled movements.

52 Seats, InteriorTo achieve a flat loading surface in the
extended luggage compartment, the
outboard seats can be lowered slightly. We
recommend however only using the seats
as seats in the raised position. Extending
the luggage compartment 353.
Flexible Seat System (FlexSpace)The rear seat row on the Meriva can be
fitted with three seats in Variant 1, or two
seats with maximum seating space in
Variant 2. In Variant 2, the centre seat is
lowered.
The luggage compartment can only be
extended in Variant 1 353.
To extend the luggage compartment, the
outboard seats can be lowered slightly
3 54.
Picture no: 14730s.tif
Variant 1: Three rear seats
Set seat backrest to centre position using
the handle on the outside of the seat 351.
Pull the handle beneath the seat. Slide the
seat all the way forward, then outward
toward the door and then further forward
to the desired position.
Release handle and allow seat to engage
in position.
Raise centre seat 354.
9 Warning
To prevent injuries, always hold back
seat backrest firmly and guide
downward when folding.

53
Seats, Interior
Picture no: 14729s.tif
Variant 2: Two rear seats
Lower the centre seat by pulling the release
handle on the back of the centre seat
backrest, fold backrest forward and
engage 354.
Set seat backrest to centre position using
the handle on the outside of the seat 351.
Pull the handle beneath the seat. Slide the
seat all the way back, then inward toward
the middle of the vehicle, and then further
back to the desired position
Release handle and allow seat to engage
in position.
Luggage compartment extension To increase the size of the luggage
compartment you can
z fold down the outboard rear seat
backrests,
z lower the middle seat,
z lower the folded outboard seats,
z fold down the passenger seat
backrest 3,
see following instructions.
The rear seats must also be in "Variant 1:
Three rear seats" 352.
Picture no: 14184s.tif
Fold down the outboard rear seat
backrests
Remove the luggage compartment
cover 3 if necessary 355.
Push head restra ints down fully, 33, 346.
Take seat belt out of the belt guide on the
backrest.
Remove the push-in sleeves 3 for
mounting the ISO-FIX child restraint
system – see separate instructions for the
ISO-FIX child restraint system.

56 Seats, Interior
Picture no: 15272s.tif
Removing
Open cover, disengage toward the rear
and remove from above.
Fitting
Insert the cover from the rear, clip into
place and fold back.
Picture no: 14736s.tif
Safety net
3
The safety net can be mounted behind the
front seats. The rear seat backrests are
folded forward.
Passengers must not be carried behind the
safety net.
Fitting
The safety net is in the luggage
compartment below the floor covering, see
right-hand column.
Fold all rear seat backrests forward, see
Extending the luggage compartment 353.
The roof frame contains two mounting
openings: Open covers. Hang the upper
net rod first in one opening and then in the
other side; clip in place forwards.
Picture no: 17952S.tif
Hook the net straps into slots on the outer
seat bracket of the front seats and tighten.
When the safety net is fitted for the first
time, the slots on the outer seat consoles of
the front seats must be opened once: press
marked area on upper edge with a blunt
object and bend inward.
Removing
Tilt strap length adjuster upwards and
unhook straps at bottom. Unhook upper
net rod and close mounting openings.