2009 OPEL MERIVA bonnet

7
In Brief
1 Parking lamps, dipped beam ... 3102
Courtesy lamp ............................ 3108
Instrument illumination .............. 3108
Rear fog lamp ............................ 3104
Fog lamp 3 ................................. 3103
Headlamp range adjustment 33104
2 Side Air vents .............................. 3115
3 Horn ............................................... 312
4 Indicators, headlamp flasher
Dipped beam, main beam ............ 311
Ambient lighting 3...................... 3107
Cruise control 3........................... 3148
5 Steering wheel remote
control 3...................................... 3111
6 Instruments .................................. 382
7 Windscreen wipers and
windscreen washer system,
headlamp washer system 3
and rear window
washer system 3 ............... 312, 3100
8 Centre air vents .......................... 3115 9
Hazard warning lamps ... 312, 3104
LED for
anti-theft alarm system 3 ............ 334
Heated seats 3 ............................ 346
10 Central information display
for time, date,
outside temperature,
infotainment system 3 ................ 390
11 Infotainment system 3 .............. 311
1
12 Front passenger airbag 3 ........... 367
13 Glove compartment ..................... 380
14 Climate control ........................... 3114
15 Air conditioning system 3 ......... 3114
Heated rear window ........... 313, 341
Recirculation system 3............... 3 119
16 Ashtray ......................................... 379
Accessory socket and
cigarette lighter ........................... 378
17 Accelerator pedal .......... 3135, 3137 18
Brake pedal .................... 3135, 3151
19 Ignition switch
with steering wheel lock .............. 315
20 Steering wheel adjustment 3 ....... 35
21 Clutch pedal 3 ........................... 3135
22 Bonnet release lever .................. 3165
23 Fuse box ..................................... 3182

9
In Brief
1Side air vents .............................. 3115
2 Front passenger airbag 3 .......... 367
3 Infotainment system 3 ............. 3111
4 Hazard warning lamps .... 312, 3104
LED for
anti-theft alarm system 3 ............ 334
Heated seats 3 ........................... 346
5 Information display
for time, date,
outside temperature,
infotainment system 3 ............... 390
6 Centre air vents .......................... 3115
7 Indicators, headlamp flasher
dipped beam, main beam ............3 11
ambient lighting 3...................... 3107
cruise control 3........................... 3148 8
Horn ............................................... 312
9 Instruments ................................... 382
10 Windscreen wipers,
windscreen washer system,
headlamp washer system 3
and rear window
washer system 3 ............... 312, 3100
11 Parking lamps, dipped beam .... 3102
Courtesy lamp ............................. 3108
Instrument illum ination .............. 3108
Fog tail lamp ............................... 3104
Fog lamp 3 ................................. 3103
Headlamp range adjustment 3.3 10
4
12 Bonnet release lever .................. 3165
13 Steering wheel remote
control 3 ...................................... 3111
14 Ignition switch with steering
wheel lock ..................................... 315 15
Steering wheel adjustment 3 ....... 35
16 Accelerator pedal .......... 3135, 3137
17 Brake pedal .................... 3135, 3151
18 Clutch pedal 3 ........................... 3135
19 Ashtray ......................................... 379
Accessory socket and
cigarette lighter ........................... 378
20 Air conditioning system 3 ......... 3114
Heated rear window ........... 313, 341
Recirculation system 3............... 3119
21 Climate control .......................... 3114
22 Glove compartment .................... 380
23 Fuse box ..................................... 3182

34 Keys, doors, windows, slide and tilt sunroofAnti-theft alarm system
3
Monitors
zthe doors, luggage compartment,
bonnet.
z the passenger compartment.
z vehicle tilt, e.g. if it is raised.
z the ignition.
Picture no: 15334t.tif
To activate
All doors, windows, sun roof 3, tilting
roof 3 and bonnet must be closed. Press
button p on the radio remote control
again within 10 seconds of locking.
If the ignition was switched on, the driver’s
door must be opened and closed once so
that the anti-theft alarm system can be
switched on.
Picture no: 11575s.tif
Activation without monitoring of
passenger compartment and vehicle tilt
Switch on e.g. if animal s are to be left in the
vehicle.
1. Close tailgate and bonnet.
2. Press button in front of the courtesy lamp
(with ignition off); LED in the hazard
warning lamp button flashes a
maximum of 10 seconds.
3. Close doors.
4. Activate the anti-theft alarm system. The LED lights up. After approx. 10 seconds,
the system is activated. The LED flashes
until the system is deactivated.
9 Warning
Do not use the system if there are people
in the vehicle! The doors cannot be
unlocked from the inside.

35
Keys, doors, windows, slide and tilt sunroof
Picture no: 14046s.tif
Light emitting diode (LED)
During the first 10 seconds of anti-theft
alarm system activation: After the first 10 seconds of anti-theft
alarm system activation:
Contact a workshop for assistance if
problems are encountered.
Picture no: 15335t.tif
To deactivate
Press button
q on remote control unit
– or –
switch on ignition.
In the case of a malfunction in the remote
control, use the key to unlock the vehicle
3 32.
If the alarm is triggered when the driver’s
door is opened, deactivate the anti-theft
alarm system by switching on the ignition.
z
LED comes on
= Test, delayed
switch-on,
z LED flashes
rapidly = Door, tailgate or
bonnet open, or
system fault.
zLED flashes
slowly =System switched on,
z LED comes on for
approx. 1 second = Switch-off function.

134 Driving and operation
Picture no: 14721s.tif
Interruption of power supply
The clutch is not disengaged if there is an
interruption of the power supply when a
gear is engaged. The vehicle cannot move.
If the battery is flat, start the car using
jump leads 3166.
If the cause is not a flat battery, contact a
workshop for assistance. If the vehicle has
to be moved out of flowing traffic,
disengage clutch.
1. Apply hand brake and switch off ignition.
2. Open bonnet and engage support. 3. Clean transmission around the cap (see
Fig.) so that no dirt can get into the
opening when the cap is removed.
4. Rotate cap to slacken and remove by lifting upwards – see figure.
5. Turn the adjusting screw clockwise using a flathead screwdriver (vehicle tools 3
3 171) until clear resistance can be felt.
The clutch has now been disengaged.
6. Fit cleaned cap again. The cap must be in full contact with the housing.
Contact a workshop for assistance
immediately.
Picture no: 15270s.tif
Manual transmissionTo engage reverse, with the vehicle
stationary wait 3 seconds after declutching
and then pull up the bu tton on the selector
lever and engage the gear.
If the gear does not engage, set the lever in
neutral, release the clutch pedal and
depress again; then re peat gear selection.
Do not grind the clutch unnecessarily.
When operating, depress the clutch pedal
completely. Do not use the pedal as a foot
rest (increases clutch wear).
Caution
Do not turn beyond the resistance, since
this can damage the Easytronic.
Caution
Towing the vehicle and starting the
engine is not permitted when the clutch
has been released in this way, although
the vehicle can be moved a short
distance.

165
Self-help, vehicle care
Self-help, vehicle care
Diesel fuel system, bleeding If the tank is allowed to run dry, the diesel
fuel system must be bled. Turn over the
ignition three times for 15 seconds at a
time. Then start the engine for a maximum
of 40 seconds
1). Repeat this process after
no less than 5 seconds. If the engine fails to
start, seek the assistance of a workshop.
Picture no: 16109s.tif
Bonnet Pull the release lever lo cated on the driver’s
side below the instru ment panel and push
it back to its original position.
Diesel fuel system, bleeding ............... 165
Bonnet .................................................. 165
Starting the engine with jump
leads 3............................................. 166
Towing .................................................. 168
Warning triangle ¨ 3,
First-aid kit +3................................. 171
Jack £ 3 and vehicle tools 3............ 171
Spare wheel 3...................................... 172
Changing wheels ................................. 174
Tyre repair kit 3................................... 178
Electrical system .................................. 181
Fuses and the most important circuits they protect ....................................... 182
Bulb replacement ................................ 185
Vehicle care.......................................... 196
1)For technical reasons, only 30 seconds are
possible on engines Y 17 DT and Z 17 DTH

166 Self-help, vehicle care
Picture no: 17883s.tif
Pull the safety catch and open the bonnet.
Any dirt or snow on the bonnet can slide
down toward the windscreen when the
bonnet is opened and block the air intake
3127.
Picture no: 14733s.tif
Secure the bonnet support. Before closing
the bonnet, press the support into the
holder.
Lower the bonnet and allow it to drop into
the catch. Check that the bonnet is
engaged.
Starting the engine with jump
leads
3
Do not use a rapid charger or push or two
the vehicle to get it started.
A vehicle with a discha rged battery can be
started using jump leads and the battery of
another vehicle.
9 Warning
Starting the engine with jump leads must
be carried out with the utmost caution.
Any deviation from the following
instruction may lead to injury or damage
due to the explosion of the batteries and
to damage of the electrics in both
vehicles.

186 Self-help, vehicle care
Picture no: 16086s.tif
Dipped beam
1. Open bonnet and engage support.
2. Rotate the cap anticlockwise and remove.
Picture no: 16087s.tif
3. Press the bulb do wn in the holder.
4. Remove bulb with connector from reflector housing.
Picture no: 16088s.tif
5. Detach plug connector from bulb base.
6. Attach connector to new bulb.
7. Insert the bulb with connector so that the lug engages in the recess in the
reflector.
8. Place headlamp protective cover in position and close.