Page 19 of 248
13
In Brief
Picture no: 14056h.tif
Operating windscreen and
headlamp washer systems
3:
Pull stalk towards steering wheel
The wipers will swipe for a few strokes.
The headlamp washer system 3 can be
operated when the lights are on.
Windscreen washer system and headlamp
washer system 3 3101, Further
information 3198, 3215.
Picture no: 14057h.tif
Rear window wiper and washer
system Rear window wash and wipe system 3101,
Wiper blades 3215, Car care 3198.
Picture no: 13992s.tif
Heated rear window, heated
exterior mirrors
3
Operated with the Ü button.
Climate control 3114, Heated rear window
3 41.
Wiper on = Push stalk forwards
Wiper off = Pull stalk towards
steering wheel
Washing = Push lever forward and hold
Page 204 of 248

198 Self-help, vehicle careWindows and windscreen wiper blades
Use a soft lint-free cloth or chamois leather
together with window cleaner and insect
remover.
When cleaning the rear window, make sure
the heating element inside the window is
not damaged.
For mechanical removal of ice, use a sharp-
edged ice scraper. Pre ss the scraper firmly
against the glass so that no dirt can get
under it and scratch the glass.
Clean smearing wiper blades with a soft
cloth and window cleaner. Locks
The locks are lubricated with a high-quality
locking cylinder grease
in the factory. Only
use de-icer in urgent cases, since it has a
de-greasing effect and affects the
operation of the locks. Have the locks re-
greased in a workshop after using de-icer.
Engine compartment
Look after areas in the engine
compartment that are painted in the same
colour as the vehicle like any other
paintwork.
It is advisable to wash the engine
compartment before and after winter and
preserve it with wax. Cover alternator and
brake fluid reservoir with plastic sheets
before washing the engine.
When washing the engine with a steam-jet
cleaner, do not direct the steam jet at
components of the Anti-lock Braking
System 3, the automatic air conditioning
system 3 or the belt drive and its
components.
After an engine wash, have all engine room
components preserved thoroughly by a
workshop using protective wax.
Do not use high-pressure jet cleaners. Underbody
Some areas of the vehicle underbody have
a PVC undercoating while other critical
areas have a durable protective wax
coating.
After the underbody is washed, check the
underbody and have more protective wax
applied if necessary.
Bitumen/rubber materials could damage
the PVC coating. Have underbody work
carried out by a workshop.
Before and after winter, wash the
underbody and have the protective wax
coating checked.
Towing equipment
Do not clean the coupling ball bar with a
steam-jet or high-pressure jet cleaner.
Page 221 of 248
215
Service and maintenance
Picture no: 13328j.tif
Windscreen wiper replacement Wiper blades on the windscreen
Lift wiper arm. Move release lever and
detach wiper blade.
Picture no: 9392t.tif
Wiper blade on the rear window 3
Lift wiper arm. Disengage wiper blade as
shown in illustration and remove.
Picture no: 14245s.tif
Windscreen and headlamp
washer systems
3
Reservoir for windscreen washing system
and rear window washing system in engine
compartment beneath the right-hand
windscreen wiper.