2009 OPEL AGILA buttons

5-1Instruments and controls
Instruments and
controlsSteering wheel adjustment
To adjust steering wheel 3, pull lever
forwards, adjust height, push lever
back and engage.
Adjust steering wheel only with
vehicle stationary and steering
column lock released.
Push the lever firmly backwards to
ensure that the steering wheel is
locked in position.
Steering wheel mounted
remote control 3
The functions of the Infotainment
system can be operated with the
buttons on the steering wheel.
Further information 3 7-2. Horn j .................................... 5-2
Windscreen wipers................ 5-2
Windscreen washer system .. 5-3
Rear window wiper/washer ... 5-3
Clock ..................................... 5-3
Outside temperature 3 .......... 5-4
Power outlets ........................ 5-4
Cigarette lighter ) 3 ............... 5-5
Ashtrays 3 ............................. 5-5
Warning lights, gauges and
indicators ............................ 5-5
Transmission display 3 ......... 5-7
Control indicators .................. 5-8
Warning chimes .................... 5-13
Service interval display 3 ...... 5-14
Engine oil life monitor 3......... 5-14
Trip computer 3 ..................... 5-14

7-2 Infotainment system
9TA Traffic Announcement
03, RDM Radio: Preset station 3,
CD/MP3: Random playback
a6, TEXT Radio: Preset station 6,
MP3: Text display
b2, RPT Radio: Preset station 2,
CD/MP3: Repeat track
c5, DISC/FLD + Radio: Preset station 5,
MP3: Skip to next folder
d4, - DISC/FLD Radio: Preset station 4,
MP3: Skip to previous folder
e1, SCN Radio: Preset station 1,
CD: Scan tracks
fb VOLUME Press: Switching on and off,
Turn: Volume setting
gCD CD player mode
hFM/AM Switch between FM and AM wavebands
igRadio: Search downwards,
CD: Skip backwards,
MP3: Skip to previous file
jhRadio: Search upwards,
CD: Skip forwards,
MP3: Skip to next fileSteering wheel mounted
remote control 3
Infotainment system functions can be
operated with the buttons mounted
on the steering wheel.
To change the volume:
Press the < or] button.
To mute the Infotainment system:
Press the i button.
To change the mode:
Press the MODE button.
Pressing the MODE button also
switches the Infotainment system on.

7-3Infotainment system
To search for the next or previous
radio station:
Press and hold the hbutton (higher
frequency) or gbutton (lower
frequency).
To select the next or previous preset
station:
Briefly press the hbutton (next
stored station) or gbutton (previous
stored station).
With CD mode active, to select the
next or previous track:
Press the hbutton (next track) or
gbutton (previous track).
Theft-deterrent feature
The Infotainment system is fitted with
an electronic security system for anti-
theft protection, ensuring the system
is useless to a thief.
You can set up a 4-digit security ID to
prevent theft. Once the ID is set up,
the unit is inoperable without this ID
when the unit is removed or the
battery is disconnected.
The Infotainment system is
programmed with the default code
‘0000’ in the as-delivered state.Setting 4-digit security ID
To set a user ID, proceed as follows:
The user ID is now required when the
Infotainment system is switched on
after the unit has been removed or
the battery has been disconnected. 1. Briefly press the bVOLUME
rotary knobf to switch the
Infotainment system off.
2. Press and hold the numbered
button 30 and button 4d
simultaneously and press the
bVOLUME rotary knobf.
“SEC” appears in the display.
3. Press the h button j and
numbered button 1e
simultaneously.
“- - - -” appears in the display.4. Press numbered button 1e
repeatedly to increase the value
for the first user ID digit.
Likewise, numbered buttons
2b, 30 and 4d
correspond to the second, third
and fourth digits of the user ID.
Set each user ID digit by
pressing the corresponding
numbered button repeatedly
until your chosen user ID is
complete.
5. Press and hold the PTY
button8 for approx.
2 seconds to enter your chosen
user ID.
“SEC” appears again in the
display and the Infotainment
system is switched off
automatically.

7-4 Infotainment system
Entering 4-digit security ID
When the Infotainment system is
switched on after the unit has been
removed or the battery has been
disconnected, the 4-digit security ID
must be entered, otherwise the unit is
inoperable.
“SEC” appears in the display when
the system is switched on. This will
not happen if the system is switched
off and back on again within
20 seconds.
To enter the user ID, proceed as
follows:Switch the Infotainment system back
on to operate: the system comes on
in radio mode.
If the wrong user ID is entered
10 times, “HELP” appears in the
display and the system cannot be
operated. Seek the assistance of a
workshop.
If you forget your user ID, seek the
assistance of a workshop.
Deleting 4-digit security ID
The stored user ID can be erased and
a new ID set at any time.To delete the existing user ID, repeat
steps 1 to 3 in “Setting 4-digit
security ID” then proceed as follows:
Set a new user ID as described in
“Setting 4-digit security ID”.
Operation
Switching on and off
Briefly press the bVOLUME rotary
knob f.
Setting the volume
Turn the bVOLUME rotary knob f. 1. Press the h button j and
numbered button 1e
simultaneously.
“- - - -” appears in the display.
2. Repeatedly press numbered
buttons 1e, 2b, 30 and
4d which correspond to the
digits of the user ID, until the
correct stored user ID is
displayed.3. Press and hold the PTY
button8 for approx.
2 seconds to enter the correct
stored user ID.
The Infotainment system is
switched off automatically.1. Repeatedly press numbered
buttons 1e, 2b, 30 and
4d which correspond to the
digits of the user ID, until the
correct stored user ID is
displayed.
2. Press and hold the PTY
button8 for approx.
2 seconds to enter the correct
stored user ID.
“- - - -” appears in the display
and the Infotainment system is
switched off automatically.

7-6 Infotainment system
Radio
Radio reception 3
Vehicle radio reception will differ from
that obtained with domestic radios.
As the vehicle antenna is relatively
near the ground, the broadcasting
companies cannot guarantee the
same quality of reception as is
obtained with a domestic radio using
an overhead antenna.
„Changes in distance from the
transmitter
„multi-path reception due to
reflection and
„shadowing
may cause hissing, noise, distortion
or loss of reception altogether.
AM-FM radio
The Infotainment system provides the
following wavebands:
AM (Long Wave and Medium Wave)
and FM (Frequency Modulation).
In addition, a manual storing and
automatic storing facility is available
on each of the wavebands, where stations can be manually or
automatically stored and recalled
using the preset stations buttons 1-6.
Radio mode
To enter radio mode when the
Infotainment system is switched-off
or while in any other mode, press the
FM/AM button h. The last station
selected is received.
Wavebands appear in the following
order when the FM/AM button h is
pressed repeatedly:
„FM1,
„FM2,
„LW,
„MW1,
„MW2.
Automatic search
To search for the next or previous
radio station, press and hold the
hbutton j (higher frequency) or
gbutton i (lower frequency) for
approx. 1 second and release.
The Infotainment system will tune to
the next receivable radio station on
the selected waveband.If ‘AF’ has been switched on
previously, the unit only searches for
RDS stations.
Station memory
In each waveband, 6 stations can be
stored under preset station memory
locations 1-6.
To store stations manually
Tune to the desired waveband and
station. Press and hold the preset
station button (1-6) for approx.
2 seconds where the selected station
is to be stored. Previously stored
stations are overwritten.
To store stations automatically
Tune to the desired waveband. Press
and hold the AST button 4 for
approx. 2 seconds. 6 stations with
strong signals are automatically
stored under preset station memory
locations 1-6. Previously stored
stations are overwritten.
If ‘AF’ has been switched on
previously, the unit only searches for
RDS stations.