2009 Mercury Grand Marquis wheel

[x] Cancel search: wheel

Page 183 of 270

Mercury Grand Marquis 2009  Owners Manuals DRIVING THROUGH WATER
If driving through deep or standing
water is unavoidable, proceed very
slowly especially when the depth is
not known. Never drive through
water that is higher than the bottom
of

Page 188 of 270

Mercury Grand Marquis 2009  Owners Manuals Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse pul

Page 194 of 270

Mercury Grand Marquis 2009  Owners Manuals Fuse/Relay
LocationFuse Amp
RatingProtected Circuits
501 — Not used
502 Diode PCM
503 — Not used
601 20A Circuit
breakerPower seats, Lumbar
602 20A Circuit
breakerPower windows relay feed
(RUN/ACC

Page 195 of 270

Mercury Grand Marquis 2009  Owners Manuals WARNING:The use of tire sealants may damage your Tire
Pressure Monitoring System and should not be used.
WARNING:Refer toTire Pressure Monitoring System (TPMS)
in theTire, Wheels and Loadingchapter fo

Page 196 of 270

Mercury Grand Marquis 2009  Owners Manuals Use of one of the dissimilar spare tires listed above at any one wheel
location can lead to impairment of the following:
•Handling, stability and braking performance
•Comfort and noise
•Ground c

Page 197 of 270

Mercury Grand Marquis 2009  Owners Manuals Full-size Matching Spare Tire/Wheel Information
This spare tire/wheel will match the road tire/wheel. When driving with
the full size matching spare tire/wheel, do not exceed 70 mph
(113 km/h). It is

Page 198 of 270

Mercury Grand Marquis 2009  Owners Manuals 2. Remove the lug wrench from the
jack. Rotate the lug wrench socket
out from the handle.
Tire change procedure
WARNING:When one of the front wheels is off the ground, the
transmission alone will not

Page 199 of 270

Mercury Grand Marquis 2009  Owners Manuals 2. Remove any wheel trim. Insert
the tapered end of the lug nut
wrench behind wheel covers or
hubcaps and twist off.
3. Loosen each wheel metal lug nut
one-half turn counterclockwise but
do not remove