from any Mercedes-Benz Service Centre. Engine oil
swhich have been approved by Mercedes-
Benz have the MB Sheet numbe rindicated on the oil container unde rthe "MB approval "notice.
The tabl eshow swhich MB Sheet numbe rapplie stow hich engine: E3
5045
E3 50 CGI BlueEFFICIENCY
E500 E2
00 CGI BlueEFFICIENCY
E2 50 CGI BlueEFFICIENCY MB Shee
tnumber 229.3, 229.5 229.3, 229.5, 229.51
E2
20 CDIB lueEFFICIENCY
E2 50 CDIB lueEFFICIENCY
E3 50 CDIB lueEFFICIENCY MB Shee
tnumber
Vehicles with adiesel particle filter 228.51, 229.31, 229.51
i
In the event that the:
R engine oil brand
R grad e(MB Sheet number)
R SAE classification (viscosity)
is not available ,you can use another minera lorsyntheti cengine oil which has been approved
by Mercedes-Benz. You must then have an oil change carrie dout at the earliest possible
opportunity.
Mixing oil sreduces the benefits of high-grade engine oil.
! Do not use lubricant additives .These can lea dtoincreased wea rand damage to mechan-
ical assemblies. The use of lubricant additives wil lresult in arestrictio nofyourw arranty. Engine oil viscosity
Viscosity describes the flow characteristics
of afluid. If an engine oil has ahigh viscosity,
this means it is thick; alow viscosity means
that it is thin.
Select the SAE classification (viscosity )ofthe
engine oil according to the outside tempera-
ture. The following tabl eshow syou the vis-
cosity classes to be use ddepending on the
average airt emperature. 45
Only for certain countries. Service products and capacities
289Technical data
207_AKB; 2; 3, en-GB
mkalafa, Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 289 Z
"Minispare" emergency spare wheel*
70 E2
50 CGI BlueEFFICIENCY /
E2 50 CDI BlueEFFICIENCY E3
50 /
E3 50 CGI BlueEFFICIENCY /
E3 50 CDI BlueEFFICIENCY /
E5 00 17" Tyres
– T1
35/80R 17 103M Tyre pressure
– 4.2 bar
Wheels
– 3.5B
x17H2ET1 9.5 Trailer tow hitch*
Mounting dimensions
G
Risk of accident
Only have atrailer tow hitch retrofitted at a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required.M ercedes-Benz
recommends that you use aMercedes-Benz
Service Centre for this purpose. In particular,
work relevant to safety or on safety-related
systems must be carried out at aqualified
specialist workshop.
! If you have atrailer tow hitch retrofitted,
changes to the cooling system may be nec-
essary, depending on the vehicle type.
If you have atrailer tow hitch retrofitted,
observe the anchorage points on the chas-
sis frame. Anchorage points for the trailer tow hitch
0046
Anchorage points
0047 Overhang dimension
008A Rear axle centre line
For trailer tow hitches fitted at the factory, the
overhang dimension is 1151.3m m.
70 Use of snow chains not permitted. Trailer tow hitch*
303Technical data
*o
ptional
207_AKB;2;3,e
n-GB
mkalafa, Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 303 Z
