2009 MERCEDES-BENZ CL COUPE manual radio set

Switching to radio mode
X Select AudioQRadio.
or
X Press the Rfunction button once or
twice.
The radio display appears once the system
has switched to radio mode. You will hear
the last station played on the last wave-
band.
The number of times you have to press the
function button depends on the operating
mode currently selected. Example: radio operation
:
Frequency of the selected station
; Sound settings
= To show/switch waveband
? Name of the selected station
A Radio text transmitted from the station
B Preset position of the selected station
C Artist and track
D Preset options
E Radio options Switching wavebands
You can switch the radio between the FM,
MW, LW, SW and DAB wavebands*.
X Audio QRadio QWaveband display
=.
X Select the desired waveband.
You will hear the last station on the selec-
ted waveband. i
In the MW, LW and SW wavebands,
COMAND shows only the station fre-
quency. Selecting a station
You can select stations from the station list
or by manually entering the frequency.
Selecting from the station list i
The station list is only available in the FM
waveband and in DAB* radio mode. It con-
tains all the stations that can currently be
received, and is sorted alphabetically. For
stations without a programme service, the
list shows the frequency instead of the
name.
X Slide XVY or turn cVdwhen the main area
is selected.
or
X Select AudioQRadio QRadio Q
Station list.
or
X Press and hold the 9or: button on
the multi-function steering wheel.
Selecting using the station search func-
tion i
The station search function is only avail-
able in the MW, LW and SW wavebands.
X Slide XVY or turn cVdwhen the main area
is selected.
Station search scans up or down and stops
at the next station found.
or
X Press and hold the 9or: button on
the multi-function steering wheel. Radio
71COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,V
ersion: 2.11.7.7
2009-02-27T14:54:17+01:00 - Seite 71 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:14:57; WK

Selecting via the station presets
X
Select AudioQRadio QMemory.
or
X Press Wwhen the main area is selected.
The preset menu appears. The #dot in
front of a preset position indicates that the
currently selected channel is stored there.
X Select the preset position and briefly press
W.
You can also select the station using the digits
on the telephone keypad (Y page 106) or the
buttons on the multi-function steering wheel:
X Briefly press the 9or: button on
the multi-function steering wheel.
Selecting by entering the frequency
manually X
Select AudioQ RadioQRadio Q
Frequency input.
X To select a higher or lower number: slide
ZVÆ or turn cVd.
i You can only tune in to currently permit-
ted frequencies.
X To move to the next frequency: slide
XVY.
X To set the frequency: pressW.
COMAND tunes in to the frequency
entered.
i If you enter a frequency in the medium
waveband which is outside the frequency
range, COMAND tunes in to the next lower
frequency. Storing a station
Twenty stations can be stored in each wave-
band.
If station fix or frequency fix has been set,
these functions are saved when the station is
saved. Storing manually X
Select AudioQRadio QRadio Q
Save station.
or
X Press Wwhen the main area is selected.
or
X Select AudioQRadio QMemory.
A station preset display appears. The #
dot in front of a preset position indicates
that the currently selected channel is
stored there. Storing the station to the selected preset
position
If you have called up the station preset display
using Save station:
X Press Wbriefly.
In the other two cases:
X Press and hold Wuntil you hear a tone.
The station is stored.
Storing using Autostore i
This function automatically stores chan-
nels which can be received in order of their
reception quality. Any stations stored man-
ually in the preset memory will be lost if
COMAND finds 20 stations. If COMAND
finds fewer than 20 stations, for example
9, then the stations stored in preset posi-
tions 1 - 9 will be lost. 72
RadioCOMAND
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 72
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:14:57; WK

transmitting it and if the reception condi-
tions are adequate.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel list.
The station list appears.
It is sorted alphabetically and contains:
R analogue TV channels (all standards)
R digital TV channels (DVB-T standard)
R digital radio stations (DVB-T standard)
The #dot in front of a list entry indicates
the currently selected channel. A number
in front of the list entry indicates the preset
position in the channel preset memory.
Selecting channels by entering the
channel and programme number i
Several programmes can be transmitted
on one channel with digital TV. You can
therefore enter a channel and the desired
programme on this channel. Only one pro-
gramme can be sent on a channel with ana-
logue TV. The programme entry function
therefore has no effect.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel entry.
X Select a number to enter the channel or
programme.
X To select a higher or lower number: slide
ZV Æor turn cVd.
X To select the next number: slideXVY.
X To confirm the entry: pressW.
i The TV tuner always sets the channel and
the programme that you have entered.
Therefore, you can also set channels and programmes that cannot currently be
received. Storing TV channels
There are twenty preset positions.
Storing channels manually Calling up the preset memory display and
selecting a preset
X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Save channel.
or
X Select Presets.
Both of these will bring up a selection list.
The #dot in front of a preset position
indicates that the currently selected chan-
nel is stored there.
X To select a preset position: slideZVÆor
turn cVd.
Storing the channel to the selected preset
position
X If you have called up the channel preset
display via the Save channel menu item,
press Wbriefly.
or
X If you have called up the channel preset
display via the Presetsmenu item, press
and hold Wuntil a tone sounds.
The channel is stored.
Storing using Autostore This function automatically stores channels
which can be received in order of their recep-
tion quality. Any channels stored manually in
the preset memory will be lost.
X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90). TV*
91COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 91 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:02; WK