2009 LAMBORGHINI MURCIÉLAGO front rear
[x] Cancel search: front rearPage 199 of 1173
1
L824 01 00 05
Fig.1
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
( Q J L Q H D V V H P E O \
7 K L V R S H U D W L R Q U H T X L U H V D F D U O L I W D Q G D K R L V W Z L W K D U R F N L Q J O H Y H U D Q G F K D L Q V W R V O L Q J W K H H Q J L Q H W R E H ¿ [ H G R Q W K H H [ K D X V W P D Q L I R O G K R R N V
1. Lift the vehicle on the car lift 20 cm from the ground.
2. Fix the four engine extraction frame to the engine side eyes and lift the whole engine-drive assembly very
carefully directing it by hand to prevent it from hurting any vehicle part.
3. After the engine-drive assembly has been inserted, let the vehicle down the car lift.
4. Connect the air conditioning system compressor pipes (026005).
5. Insert the two silencer hood brackets.
6. Insert the power steering pipes (042305).
7. Connect the lower water pipe between the engine and radiator.
8. Fix the crossbar.
9. Connect the knock sensor (4) wiring harness, the phase transformers (2) (019005)and the MAPS (2).
10. Connect the catalyst temperature sensors (025405)and the thermocouple and oxygen sensor cables
(025305).
11. Connect the injection (side) and the ignition (front) cables.
12. Connect the alternator cables (090305).
13. & R Q Q H F W W K H Z K L W H F R Q Q H F W R U W R W K H H Q J L Q H À \ Z K H H O
14. Connect the ground cables from the head 7-12.
15. Insert the canister-head 1-6 pipe.
16. Fix the rear stabilizer bar and move it forwards (051105).
17. Assemble the silencer tightening the rear mounting devices (not the bolts with springs) (025105).
18. Lift the vehicle on the car lift.
19. Reattach the silencer mounting devices (025105).
Page 200 of 1173
2
L824 01 00 05
Fig.2
A
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
8 Q G H U W K H Y H K L F O H 20.
6 X S S R U W W K H J H D U E R [ E \ P H D Q V R I D V S H F L ¿ F O L I W L Q J G H Y L F H E \ L Q V H U W L Q J D Z R R G H Q S L H F H (A-Fig.2 ) and lever by
means of a crowbar to move the engine towards the rear part in order to disconnect the front differential from
the drive pipe.
21. Move the axle shafts toward the rear differential.
22. Remove the end of the clutch oil pipe and reconnect it.
23. Connect the cable (positive) of the starter (091105).
24. Screw the two engine side 24-mm mounting bolts.
25. Secure the shaft to the front differential (052105).
26. Reposition the rear axle shaft screws (6 per side) and connect the rear axle shafts (050105).
27. Reposition the ground plaited cable on the left side of the engine.
28. Secure the front drive mounting bolts (030105).
29. Connect the silencer mounting devices (025105).
30. Assemble the lower front drive cross member elements (052105).
31. From inside the vehicle assemble the panel and the gearshift on the tunnel (086805).
32. Tighten the clamps while protecting the exhaust terminals (025105).
33. Connect the inlet and outlet pipe from the oil pan (011705).
34. Fill the oil pan completely (about 2 liters) (011708).
35. Fill engine oil tank (about 9 liters) (011708).
Page 226 of 1173
1
L824 01 05 03
Fig.1 Fig.2
Fig.3
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& U D Q N V K D I W D Q G E H D U L Q J G L V D V V H P E O H 3 U H O L P L Q D U \ R S H U D W L R Q V • Engine disassemble (010003)
• Thermostatic valve disassemble (012103)
• Gearbox disassemble (030103)
• Silencer and exhaust terminals disassemble (025103)
• Exhaust manifolds disassemble (025103)
• Air intake manifold disassemble (012903)
• Alternator, power steering pump and air conditioning system compressor frame disassemble.
• Head disassemble (010303)
• Rear differential disassemble (050903)
• Disassemble the front crankshaft pulley
• Timing system cover disassemble (019003)
• Disassemble the oil pan
• Disassemble the oil draft pipe
• Timing system chain disassemble (019003)
• Oil pump disassemble (011503)
& U D Q N V K D I W D Q G E H D U L Q J G L V D V V H P E O H
1. Fix the crankcase with the lower part facing upwards.
2. Unscrew the bolts which mount the crankcase to the lower part of the crankcase ( Fig.1).
3. Remove the lower part of the crankcase.
4. Remove the connecting rods and the pistons.
5. 5 H P R Y H W K H F U D Q N V K D I W E \ P H D Q V R I D V S H F L ¿ F O L I W L Q J G H Y L F H Fig.2).
6. Check the crankshaft thoroughly for wear or scratches.
7. Remove the bushings from the lower and upper parts of the crankcase ( Fig.3).
Page 231 of 1173
4
L824 01 05 05
Fig.6
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
' X U L Q J W K H D V V H P E O \
15. Install P/N 961195027 liner-stop on the concerned liner to prevent it from moving.
16. Insert the connecting rod-piston assembly in the crankcase, checking that:
• 7 K H F R Q Q H F W L Q J U R G E H D G V I D F H W K H F U D Q N V K D I W V K R X O G H U V
• The numbers printed on the connecting rods caps correspond to the numbers printed on the
connecting rod small end.
17. Apply Molycote 1000 on the threads and on the striking surface of the connecting rod cap bolts and tighten the
bolts; Tightening torque (000800-2a).
18. Then tighten to angle check.
7 L J K W H Q L Q J Y D O X H V D
• Oil pump assemble (011505)
•Timing system chain assemble (019005)
• Assemble the oil draft pipe
• Assemble the oil pan
• Timing system cover assemble (019005)
• Assemble the front crankshaft pulley
•Rear differential assemble (050905)
• Head assemble (010305)
• Alternator, power steering pump and air conditioning system compressor frame assemble.
• Air intake manifold assemble (012905)
• Exhaust manifolds assemble (025105)
• Silencer and exhaust terminals assemble (025105)
• Gearbox assemble (030105)
• Thermostatic valve assemble (012105)
• Engine assemble (010005)
Page 267 of 1173
1
L824 01 17 04
Fig.1 Fig.2
A
DCB
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
6 L H Y H ¿ O W H U F O H D Q L Q J L Q W K H R L O W D Q N
( Q J L Q H R L O P X V W E H S U H Y L R X V O \ D Q G F R P S O H W H O \ G U D L Q H G
The ¿ O W H U U H S O D F H P H Q W P X V W E H F O H D Q H G H Y H U \ R L O F K D Q J H V
and anyway always after the engine oil
K D V E H H Q F R Q W D P L Q D W H G E \ I R U H L J Q À X L G V D Q G R U P D W H U L D O V
• Remove LH rear wheel.
• Remove LH rear fender apron front part.
• Remove the battery.
• Disconnect the hose ( % ) L J I U R P W K H V L H Y H ¿ O W H U & ) L J ).
• 5 H P R Y H W K H V L H Y H ¿ O W H U & ) L J ) and clean it by means of solvent and compressed air.
• , Q V W D O O W K H V L H Y H ¿ O W H U L Q W K H R L O W D Q N $ ) L J ) inserting a new copper washer ( ' ) L J ): tighten by hand as
necessary.
• Clean the hose ( % ) L J F R X S O L Q J J D V N H W D Q G W K H Q F R Q Q H F W L W W R W K H V L H Y H ¿ O W H U & ) L J ) tightening it by hand
as necessary.
Page 298 of 1173
L824 01 28 00
Fig.2
5 7 $ B 5 ( $ ' 5 7 $ B 5 ( $ '
5 7 $ B 5 ( $ ' 5 7 $ B 5 ( $ '
A
'
1-6
7-12C
%
(
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Fuel Manifold
Each cylinder bank is equipped with a fuel manifold that distributes the fuel to the injectors.
) X H O P D Q L I R O G ) L J
A. Cylinder bank 7-12 fuel manifold
% Cylinder bank 7-12 pressure regulator
C. Injector
' Cylinder bank 1-6 fuel manifold
( Cylinder bank 1-6 pressure regulator
In the throttle body pcodes, the positioning of the body depending on the cylinder bank and its position is
displayed: FrontandRear I U R Q W L V W K H W K U R W W O H E R G \ R Q W K H À \ Z K H H O V L G H D Q G U H D U L V W K H W K U R W W O H E R G \ R Q W K H
exhaust side).
F ly : e ll
Page 379 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual
L824 02 51 03
) L J
C
A
A %
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-378.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual
L824 02 51 03
) L J
C
A
A %
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
L824 02 51 03
) L J
C
A
A %
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
( ' L V D V V H P E O L Q J W K H Z D \ S L S H V 3 U H O L P L Q D U \ R S H U D W L R Q V •
Remove the car engine (010003).
• Disassemble the catalytic converters (013103).
' L V D V V H P E O L Q J W K H S L S H V
1.
Detach all 4 clamps (2 clamps ( $ ) L J ) for each 3-way pipe) securing the 3-way pipe ( % ) L J ) to the front
and rear exhaust manifolds. The connecting clamp ( & ) L J ) between the 3-way pipe and the catalytic
converter was removed along with the catalytic converter.
2. Remove the 3-way pipe.
Page 380 of 1173
7
L824 02 51 03
) L J
%C
A
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
) ' L V D V V H P E O L Q J W K H H [ K D X V W P D Q L I R O G V 3 U H O L P L Q D U \ R S H U D W L R Q V •
Remove the car engine (010003).
• Disassemble the catalytic converters (013103).
• Disassemble the 3-way pipes 3 R L Q W ( .
' L V D V V H P E O L Q J W K H P D Q L I R O G V
1.
Unscrew the screws ( $ ) L J ) securing the two exhaust manifolds, the front exhaust manifold ( % ) L J ) and
the rear manifold ( & ) L J ), to the engine.
2. Remove the exhaust manifolds.