2009 LAMBORGHINI MURCIÉLAGO ECU
[x] Cancel search: ECUPage 302 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 01 28 03
Fig.1 Fig.2
A
D
C
B
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-301.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 01 28 03
Fig.1 Fig.2
A
D
C
B
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
1
L824 01 28 03
Fig.1 Fig.2
A
D
C
B
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Injection rail disassembly 3 U H O L P L Q D U \ R S H U D W L R Q V •
Remove the carbon bulkhead above the manifold (081303).
Injection rail disassembly
1. Unscrew the three screws ( A-Fig.1) that secure the injection rail to the engine.
2. Disconnect the injection rail from the front pipe ( B-Fig.2).
3. Disconnect the pressure regulator’s pipe ( C-Fig.1).
4. Disconnect the regulator’s fuel delivery pipe ( D-Fig.1).
5. Extract the injection rail.
: K H Q I U H H L Q J W K H Y D U L R X V S L S H V E H Y H U \ F D U H I X O R I D Q \ I X H O U H V L G X H V V W L O O L Q V L G H W K H P Z K L F K F R X O G spill onto parts that are still hot inside the engine hood.
7 K H V H R S H U D W L R Q V V K R X O G W K H U H I R U H D O Z D \ V E H F D U U L H G R X W Z L W K W K H H Q J L Q H F R O G D Q G L Q D Q \ F D V H using a pan for collecting fuel that spills out of the pipes.
Page 305 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 01 28 05
Fig.1 Fig.2
D
A
B
C
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-304.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 01 28 05
Fig.1 Fig.2
D
A
B
C
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
1
L824 01 28 05
Fig.1 Fig.2
D
A
B
C
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Injection rail assembly
1.
Connect the regulator’s fuel delivery pipe ( A-Fig.1).
2. Connect the pressure regulator’s pipe ( B-Fig.1).
3. Connect the injection rails to the front pipes ( C-Fig.2).
Injection rails attachment; tightening torque (000800-14c).
4. Secure the manifold to the engine using the three mounting screws ( D-Fig.1).
• Assemble the carbon bulkhead above the manifold (081305).
Page 307 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-306.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Throttle bodies ) L J
7 K H W K U R W W O H E R G L H P H W H U V W K H H Q J L Q H D L U À R Z U D W H D Q G W K H Q W K H S R Z H U G H Y H O R S H G E \ W K H H Q J L Q H D F F R U G L Q J W R W K H
requests of LIE control units received by CAN lines. The LIEs create these requests according to PA and RPM parameters, and operating strategies at idle and start-up.
Each throttle bodie has a throttle controlled by an actuator that receives opening information from the ETB ECU.
There are 2 feedback potentiometers inside the throttle that read its position in order to diagnose any malfunctioning
of the throttle body and send the information to the ETB ECU (which forwards the information to the 1-5 cylinder bank LIE).
' R Q R W G L V D V V H P E O H W K H W K U R W W O H E R G L H E X W R Q O \ F O H D Q L W
9 , 6 6 \ V W H P 9 D U L D E O H , Q W D N H 6 \ V W H P
7 R R S W L P L ] H W K H L Q W D N H P D Q L I R O G À X L G P H F K D Q L F V H D F K S O H Q X P L V H T X L S S H G Z L W K W K U R W W O H V G U L Y H Q E \ S Q H X P D W L F
D F W X D W R U V W K D W D O O R Z V W R P R G L I \ W K H L Q W D N H U H V R Q D Q F H I U H T X H Q F L H V , Q W K L V Z D \ W K H ¿ O O L Q J X S R I W K H F \ O L Q G H U V D W different engine speed is improved; the torque output is thus optimized.
The pneumatic actuators are driven by control solenoid valves directly managed by the LIEs according to the engine coolant temperature (the system is disabled at temperatures < 60°C) and engine rpm.
9 , 6 V \ V W H P F R P S R Q H Q W V ) L J
A. PLENUM VLV
B. PLENUM
C. BYPASS
D. BYPASS VLV
( Pneumatic actuator
F. Control solenoid valves
Page 312 of 1173
3
L824 01 29 03
Fig.5 Fig.6
E
Fig.7
HHFF
G
C
D
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
3.
Remove the clamps ( C-Fig.5) and disconnect the wiring harness connectors ( D-Fig.5) secured onto the rear
cross member.
4. Disconnect the air intake pipes 3 R L Q W $ .
5. Disconnect the coils ( E-Fig.6).
6. Disconnect the knock sensors ( F-Fig.7) and the respective support ( G-Fig.7).
7. Disconnect the variable valve timing pins ( H-Fig.7).
Page 313 of 1173
4
L824 01 29 03
Fig.8
I
Fig.9
LL
Fig.10
MMM
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
8.
Remove the 2 screws ( I-Fig.8) securing the grounds onto the crankcase.
9. Disconnect the pipes connecting the manifold valves ( L-Fig.9
).
10. Unscrew the 3 center screws ( M-Fig.10).
11. Remove the air intake manifold.
Page 315 of 1173
2
L824 01 29 05
Fig.5
C
Fig.4
BB
Fig.3
AAA
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
B) Assembling the
D L U L Q W D N H P D Q L I R O G
1. Position the air intake manifold.
2. Tighten the 3 center screws ( A-Fig.3).
3. Connect the manifold valve pipes ( B-Fig.4).
4. Secure the grounds onto the crankcase using the 2 screws ( C-Fig.5).
Page 316 of 1173
3
L824 01 29 05
Fig.8
Fig.7
G
Fig.6
DDEE
F
I
H
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
5.
Connect the variable valve timing pins ( D-Fig.6).
6. Connect the knock sensors ( E-Fig.6) and the respective support ( F-Fig.6).
7. Connect the coils ( G-Fig.7).
8. Connect the air intake pipes 3 R L Q W $ .
9. Connect the wiring harness connectors (
H-Fig.8) and secure them onto the rear cross member using clamps
( I-Fig.8 ).
Page 322 of 1173
1
L824 01 31 03
Fig.1
B
Fig.2
A
B
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& D W D O \ W L F F R Q Y H U W H U G L V D V V H P E O \ 3 U H O L P L Q D U \ R S H U D W L R Q V •
Lift the vehicle on the car lift (000000).
• Disassemble the black plastic rear grille (081303).
• Disassemble the engine hood (082703).
• Disassemble the silencer safety grid (025103).
• Disassemble the spoiler above the silencer (082703).
• Disassemble the silencer guard (025103).
• Disassemble the two exhaust terminals (025103).
• Disassemble the four supports that secure the silencer to the chassis (025103).
• Free the two pipes from the catalytic converters that connect the silencer to the catalytic converters themselves,
removing the clamps (025103).
• Remove the four oxygen sensors (025303).
• Remove the two catalytic converter temperature sensors (025403).
& D W D O \ W L F F R Q Y H U W H U G L V D V V H P E O \
1. Disassemble the heat-proof panel ( A-Fig.1) under the right catalytic converter.
2. Free the catalytic converter from the rest of the engine unit by removing the clamps ( % ) L J ).
3. Extract the catalytic converter.
5 H S H D W W K H V D P H R S H U D W L R Q V I R U W K H O H I W F D W D O \ W L F F R Q Y H U W H U