2009 JAGUAR XF parking brake

Mirror dip when reversing
This feature can be used to improve lower side views
while reversing. It can be enabled or disabled via the
touch screen. From theHomescreen, select Vehicle,
then Veh. settings , thenParking.
To set a dip position:
• with the hand brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the
set dip position will be automatically selected. The
mirrors will return to their normal position when
another gear is selected.
Operating note
To prevent automatic movement of the steering
column, turn the control to the COLUMNposition.
Comfort adjustments
Steering wheel adjustment
Seat adjustment options will vary depending upon
vehicle specification.
1. Forward and backwards adjustment, cushion height and cushion front tilt.
2. Cushion length.
\f. Side bolster in/out adjustment.
4. Lumbar support.
5. Recline adjustment and head restraint height.
Steering wheel adjustment
Turn the control to COLUMNthen move the control
to adjust the height and reach.
Exit mode
With the control set to AUTO, the steering column
will move to provide greater clearance for exiting
when the driver's door is opened.
Entry mode
After the driver's door is closed and the START
STOP button is pressed the column will return to its
previous position.
1
2
354
4
Operating note
The seat heater controls are accessed via the
touch\bscreen.
Door mirrors
Door mirror adjustment
1.Press a button to select a
mirror.
2. Use to adjust the mirror
position.
Powerfold mirrors
Press buttons 1
simultaneously to fold the
mirrors inward. Press again to
unfold.
2
1
Seat adjustment

Facia
11.Luggage compartment release.
12. Forward alert.
1\f. Rear fog lamps.
14. Horn.
15. Column adjust switch.
16. Climate control system.
17. Engine start/stop button.
18. DSC (Dynamic Stability Control)
switch.
19. ASL (Automatic Speed Limiter)
switch.
20. EPB (Electric Parking Brake).
1.
Master locking switches.
2. Hazard warning switch.
\f. Touch screen.
4. Home screen
5. Touch screen on/off
6. Direction indicators and exterior
lighting.
7. Audio and telephone switches.
8. Instrument pack, message
centre and warning indicators.
9. Cruise control switches.
10. Windscreen wiper and washer. 21.
Dynamic mode switch.
22. Winter mode switch.
2\f. JaguarDrive selector.
24. Audio system.
25. Mirror adjuster.
26. Mirror selector switches.
27. Window switch isolator.
28. Window switches.
S ART
S OP S
D C
13678910
11
13
1415
18
17
1624
12
2
22
23
19
20
21
26
25
28
27
45
7
Warning lamps
Low tyre pressure
Airbag fault
Fog lamps on
DSC off, Trac DSC ON
or DSC fault. Flashing \b
DSC operating.Seat belt reminder
ASL active
Forward alert active
EPB on, braking system
fault or brake fluid low
ABS fault or EPB fault
Adaptive Cruise Control
active
Engine malfunction

Exterior lamps\bTrip computer
Move the lever up or down to operate the direction
indicators, forward for high beam and backwards for
high beam flash. A brief push up or down will flash
the indicators three times.Rotate the collar to the first position to select
side lamps.
Second position is headlamps.
Next position is Autolamps. Sensor
controlled to switch side lamps and low
beam headlamps on or off as appropriate.
Autolamps combined with exit delay.
Headlamps can remain on to illuminate the
immediate vicinity for a set period after
leaving the vehicle. There are three time
setting positions. Press the button on the end of the lever to
cycle through the trip computer displays in
the message centre. 1. Front screen wash/wipe.
2. Rain sensor activated wipe.
\f. Slow speed.
4. Fast speed.
5. Controls sensitivity of the rain sensor. With
position 2selected, rotate the collar upwards to
reduce sensitivity and increase the wiper delay.
4
3
2
1
5
Wipers and washers
Autolamps
If AUTO mode is selected and the front screen
wipers are operated for more than 20 seconds, the
exterior lamps will be switched ON automatically.
8
Electric parking brake
• Apply manually when stationary in Park,Drive or
Reverse by pulling up the parking brake switch.
• Can be manually released when the engine is running and the foot brake is applied.
Press the parking brake switch down to release
and pull it up to apply.
• If manually applied whilst in Drive orReverse, the
parking brake will automatically release when the
accelerator is applied.
ASL
P
DSC
Operating note
The brake must be manually applied when parking.
Driving
Do NOT use the recess in the electric parking brake
as a storage area.