2009 HONDA ODYSSEY door lock

[x] Cancel search: door lock

Page 151 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual If the power sliding door MAIN 
switch on the dashboard is in the
OFF position, you cannot open or
close the sliding doors with the
remote transmitter.
You can open or close each sliding
door with the

Page 152 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual 
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
repr

Page 153 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual ´
If it takes several pushes on the 
button to lock or unlock the doors
and the tailgate, replace the battery
as soon as possible. 
Battery type: CR2025 To replace the battery, separate the 
half s

Page 154 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual To lock the doors and the tailgate, 
press the f ront of the master door
lock switch on either f ront door,
pressthelocktabonthedriver’s
door, or use the outside lock on the
driver’s door. 
Pressi

Page 155 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual Make sure the shif t lever is in the 
Park (P) position. 
Turn the ignition switch to the ON 
(II) position, and open the driver’s
door.
The auto door locking f eature has
three possible settings:
Y

Page 156 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when theshif t lever is moved out of the Park (P)position.
Make sure the shif t lever is in the 
Park (P) position. Release the switch, and within 5
seconds, turn the igni

Page 157 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when thevehicle’s speed reaches about 9 mph(15 km/h). On LX, EX, EX-L and Canadian DX
models
Make sure the shif t lever is in the 
Park (P) position. Pushandholdthefront

Page 158 of 532

HONDA ODYSSEY 2009 RB3-RB4 / 4.G Owners Manual Unlocks the driver’s door or all doorsand tailgate when the shif t lever ismoved into the Park (P) position.
Make sure the shif t lever is in the 
Park (P) position. 
Turn the ignition switch to the