2009 HONDA CIVIC SEDAN Owner's Manual (in English)

Page 81 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) Youshouldhavereceivedakey 
number tag with your set of keys.
You will need this key number if you 
ever have to get a key replaced. Use 
only Honda-approved key blanks.
The valet key works only in the

Page 82 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) CONT INUED
The system may not recognize your 
key’s coding if another immobilizer
key or other metal object (i.e. key 
f ob) is near the ignition switch when 
you insert the key. 
If the system repe

Page 83 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) µ
µ
µ
µ If the f ront wheels are turned, the 
anti-thef t lock may make it dif f icult
to turn the key. Firmly turn the
steering wheel to the lef t or right as
you turn the key.
You can
operat

Page 84 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) Each door has a lock tab next to the 
inside door handle. Pull the tab out
to lock the door, and push it in to 
unlock the door.To lock any passenger’s door when
getting out of the vehicle, pull the

Page 85 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) To lock the passenger’s door when 
getting out of the vehicle, pull out
the lock tab and close the door. To 
lock the driver’s door, remove the 
key f rom the ignition switch and pull
out the lock

Page 86 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) CONT INUED
The auto door locking f eature has 
three possible settings:The doors lock when the vehicle 
speed reaches 9 mph (15 km/h). 
The doors lock whenever you 
move the shift lever out of the
Par

Page 87 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) Locks all doors when the shif t lever ismoved out of the Park (P) position (A/Tvehicles only).
Make sure the shif t lever is in the 
Park (P) position. 
Turn the ignition switch to the ON 
(II) positi

Page 88 of 396

HONDA CIVIC SEDAN 2009  Owners Manual (in English) CONT INUED
The auto door unlocking f eature has 
f ive possible settings:
Make sure the shif t lever is in the
Park (P) position (A/T vehicles). 
Turn the ignition switch to the ON 
(II) position, and