2009 HONDA ACCORD SEDAN Owner's Manual (in English)

Page 81 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) µµ
µ
µ
The ignition switch has f our 
positions: LOCK (0), ACCESSORY
(I), ON (II), START (III) You can insert or
remove the key only in this position.
To turn the key, push it in slightly. If

Page 82 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) The lock tab on any passenger’s door 
locks and unlocks that door. 
When the door is unlocked, you can 
seetheredindicatoronthelocktab
above the inner door handle.Youcanopenorclosethewindows
and the

Page 83 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) If you f orget and leave the key in the 
ignition switch, lockout prevention
will not allow you to lock the driver’s
door. With any door open and the
key in the ignition switch, locking
with master

Page 84 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) CONT INUED
Locks all doors when the shif t lever ismoved out of the Park (P) position (A/Tvehicles only).
Make sure the shif t lever is in the 
Park (P) position (A/T vehicles). 
Turn the ignition swi

Page 85 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Pushandholdthefrontof the 
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds). 
Release the switch, and

Page 86 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) CONT INUED
The auto door unlocking is 
deactivated all the time.
The auto door unlocking f eature
has f ive possible settings:
Make sure the shif t lever is in the
Park (P) position (A/T vehicles). 
T

Page 87 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Unlocks the driver’s door or all doorswhen the ignition switch is moved out ofthe ON (II) position.
driver’s door unlock
feature.
Unlocks the driver’s door or all doors
when the shif t lever is

Page 88 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Release the switch, and within 5 
seconds, turn the ignition switch
to the ACCESSORY (I) position.move the shif t
lever to the Park (P) position. 
Turn the ignition switch to the 
LOCK (0) position.
O