2009 FIAT PANDA display

15
CD PLAYER
INTRODUCTION
QUICK
GUIDE
FUNCTIONS
AND ADJUSTMENTS
RADIO
15
AF function
(alternative frequency search)
The radio can operate in two different
modes in the RDS system:
❒“AF ON”: search for alternative fre-
quencies activated (the letters “AF” ap-
pear in the display);
❒“AF OFF”: search for alternative fre-
quencies not activated.
By turning the function on (“AF ON”
mode) the car radio will automatically
tune into the station with the strongest
signal that is transmitting the same pro-
gramme. While driving, you can continue
to listen to the same station without hav-
ing to change the frequency when you
change zones.
Obviously, it must be possible to receive
the station that you are listening to in the
area you are driving through.
To turn the AF function on/off, press the
MENU button, select “AF ON” or “AF
OFF”. If the AF function was turned on,
“AF” will appear in the display.
If the radio is tuned to a station in the AM
band when the AF function is turned on,
it will tune to the last selected station in
the FM1 band. TA function
(traffic news)
Some stations on the FM band (FM1, FM2
and FMT) can transmit information about
traffic conditions.
To turn the traffic update TA function
on/off briefly press the MENU button and
select “TA ON” or “TA OFF”.
WARNING If the TA (traffic update) func-
tion is activated in CD mode or with
Mute/Pause activated: the automatic
search for an enabled station will start.
With the TA function, it is possible to:
❒search only for RDS stations that trans-
mit on the FM band, which are enabled
to transmit traffic information;
❒receive traffic information even if the
CD player is on;
❒receive traffic information at a minimum
preset volume even with the radio vol-
ume off. MENU
MENU button functions
Press the MENU button briefly to activate
the Menu function. The display will show
the first available menu item.
Press the MENU button to scroll through
the Menu functions. To change the setting
of the selected function, use the
¯or ˙buttons.
The current status of the function select-
ed will be shown on the display.
The functions managed by the Menu are:
❒AF (alternative frequency search);
❒TA (traffic news);
❒REG (regional programmes).
Press the MENU button for a while to ex-
it the Menu function.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 15

QUICK
GUIDE
16
CD PLAYER
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
REG function
(regional transmission reception)
Some national broadcasters will transmit
regional programmes at certain times of
the day (that vary from region to region).
This function makes it possible to tune in-
to local (regional) broadcasters automat-
ically (see EON function paragraph).
If you want the radio to automatically tune
into the regional stations being broadcast
on the network selected, the function
must be activated.
To turn the function on/off, use the
¯or
˙buttons.The current status of the function will ap-
pear on the display:
❒“REG ON”: function activated.
❒“REG OFF”: function deactivated.
If the function is deactivated and you have
tuned into a regional station working in a
given area and you enter a different area,
then the regional station received in the
new area will be broadcast.
WARNING If the AF and REG functions
are on at the same time, once a border be-
tween two regions is crossed, the radio
may not switch correctly to a valid alter-
native frequency. WARNING In some countries there are
radio stations that, although enabled, do
not transmit traffic information.
If the radio is tuned to a station in the AM
band, when TA is activated it will tune to
the last selected station in the FM1 band.
The volume at which the traffic news
is transmitted depends on the listening
volume:
❒listening volume below 20: traffic news
volume 20 (fixed value);
❒listening volume above 20: traffic news
volume equal to listening volume +1.
If the volume is changed during the traffic
news, the level will not be shown on the
display; the new level will only be main-
tained during the update.
The TA function can be interrupted by
pressing any button on the car radio.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 16

QUICK
GUIDE
18
INTRODUCTION
FUNCTIONS
AND ADJUSTMENTS
RADIO
CD PLAYER
ERROR
MESSAGES
If the CD is not legible (for example a CD-
ROM was loaded or a CD was loaded up-
side down or there is a playback error),
the message “CD ERROR” will appear on
the display for approximately 2 seconds.
When this time has elapsed, the Radio
(Tuner) mode is activated automatically
(the CD is not automatically ejected, press
the
˚button to eject it).
DISPLAY INFORMATION
When the CD player is operating, the fol-
lowing information will appear on the dis-
play that has the following meaning:
“T1”: indicates the CD track number;
“0.42”: indicates the time elapsed since the
start of the track.TRACK SELECTION
(forward/backward)
Briefly press the
¯button to play the pre-
vious CD track and the
˙button to play
the next track. The tracks are selected
cyclically: the first track is selected after
the last track and vice versa.
If the track has been played for more than
3 seconds, pressing the
¯button will
cause the track to be started again from
the beginning. In this case, if you want to
play the previous track, press the button
twice consecutively.
FAST FORWARD/REVERSE
TRACK SELECTION
Keep the
˙button pressed down to fast
forward the selected track and keep the
¯button pressed down to fast rewind the
track. The fast forward/back will stop once
the button is released.PAUSE FUNCTION
To pause the CD player, press the
ON/OFF button briefly. “PAUSE” will be
shown on the display.
To resume listening to the track, press the
ON/OFF button/knob again.
If another audio source is selected, the
pause function is turned off.
CODE CARD
This document certifies ownership of the
car radio. The Code Card contains the
model of the radio and the serial number.
IMPORTANT Keep the Code Card some-
where safe so that the authorities can be
supplied with the relevant information if
the radio is stolen.
603_97_412 Radio FunPanda EN:MY 09 9-10-2009 13:44 Pagina 18