2009 FIAT PANDA Fig. 49

191KNOW
YOUR VEHICLE
SAFETY
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
TECHNICAL SPECIFICATIONS
IDENTIFICATION DATAIt is advisable to take note of the identification codes. The
identification data stamped and shown on the data plates
and their position are the following fig. 190:
1 Identification data plate.
2 Chassis marking.
3 Bodywork paint identification plate.
4 Engine marking.
IDENTIFICATION DATA PLATE fig. 191
The data plate is located on the left side of the boot floor
and it bears the following identification data:B
Type-approval number.
C
Vehicle type identification code.
CORRECT USE OF THE
CAR
D
Chassis manufacture progressive number.
E
Maximum allowed vehicle weight fully loaded.
F
Maximum allowed vehicle weight fully loaded with trail-
er.
G
Maximum allowed weight on first axle (front).
H
Maximum allowed weight on second axle (rear).
I
Engine type.
L
Bodywork version code.
M
Spare part number.
N
Smoke opacity index (for diesel engines).
F0Z0219m
fig. 190
F0Z0702m
fig. 191
191-214 PANDA EN 7-10-2009 14:17 Pagina 191

192
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
F0Z0114m
fig. 192
F0Z0220m
fig. 193
CHASSIS MARKING fig. 193
The plate is located on the right side of the boot floor and
it bears the following identification data:❒
vehicle type (ZFA 169000);
❒
the chassis progressive number.
ENGINE MARKING
Engine marking is stamped on the cylinder block and in-
cludes the model and the chassis progressive number. BODYWORK PAINT IDENTIFICATION PLATE
fig. 192
The plate is applied on the external tailgate post (left side)
and it bears the following data:
A
Paint manufacturer.
B
Colour name.
C
Fiat colour code.
D
Paint respray and touch-up code.
191-214 PANDA EN 7-10-2009 14:17 Pagina 192

197KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
F0Z0111m
fig. 194
UNDERSTANDING TYRE MARKING fig. 194Example: 155/80 R 13 79T155 = Nominal width (S, distance between sidewalls in
mm).
80 = Height/width ratio (H/S) in percentage.
R = Radial tyre.
13 = Rim diameter in inches (Ø).
79 = Load rating (capacity).
T = Maximum speed rating.
WHEELSWHEELS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
The vehicle registration document also lists all type-ap-
proved tyres.
IMPORTANT In the event of discrepancies between the
information provided on this “Owner Handbook” and the
“Vehicle registration document”, only the latter is valid.
For safe driving, the car must be fitted with tyres of the
same make and type on all wheels.
IMPORTANT Do not use inner tubes in case of tubeless
tyres.
SPACE-SAVER WHEEL
Pressed steel wheel. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim:
0 ±1 mm
The values refer to the car in running order.
191-214 PANDA EN 7-10-2009 14:17 Pagina 197

198
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
UNDERSTANDING RIM MARKING fig. 197
Example: 5,00 B × 13 H2
5,00 = rim width in inches
1.
B = rim drop centre outline (side projection where the
tyre bead rests)
2.
13 = rim nominal diameter in inches (corresponds to di-
ameter of the tyre to be mounted)
3= Ø.
H2 = shape and number of humps (contour used for
withholding tubeless tyre beads on the rim). Maximum speed rating
Q = up to 160 km/h.
R = up to 170 km/h.
S = up to 180 km/h.
T = up to 190 km/h.
U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
Maximum speed rating for
snow tyres
QM + S = up to 160 km/h.
TM + S = up to 190 km/h.
HM + S = up to 210 km/h.
Load rating (capacity)
70 = 335 kg 78 = 425 kg 86 = 530 kg
71 = 345 kg 79 = 437 kg 87 = 545 kg
72 = 355 kg 80 = 450 kg 88 = 560 kg
73 = 365 kg 81 = 462 kg 89 = 580 kg
74 = 375 kg 82 = 475 kg 90 = 600 kg
75 = 387 kg 83 = 487 kg 91 = 615 kg
76 = 400 kg 84 = 500 kg
77 = 412 kg 85 = 515 kg
191-214 PANDA EN 7-10-2009 14:17 Pagina 198

200
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE OF
THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
DIMENSIONSDimensions are expressed in mm and
refer to the car equipped with its stan-
dard-supplied tyres.
Height is measured with car unladen.
F0Z0703m
fig. 195
Versions A B C D E F G HSaloon 3538 713 2299 526 1578 (**) 1357 (*) 1578 1366 (*)(*) Measurements may vary according to rim size.
(**) Without longitudinal bars 1540 mm
191-214 PANDA EN 7-10-2009 14:17 Pagina 200