2009 FIAT DOBLO light

INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
4
QUICK
GUIDE
❒clean every CD thoroughly removing
any fingermarks or dust using a soft
cloth. Hold CDs by the outside and
clean them from the middle outwards;
❒never use chemical products (e.g. anti-
statics or thinners or sprays) for clean-
ing as they could damage the surface
of the CDs;
❒after listening to them place CDs back
in their casings to avoid damage to them;
❒do not expose CDs to direct sunlight,
high temperatures or dampness for long
periods;
❒do not stick labels on the surface of the
CD and do not write on the recorded
surface using pens or pencils;
❒do not use CDs that are very scratched,
flawed, distorted, etc. Using discs like this
will result in malfunctions or damage to
the player;
❒the use of original CD supports is re-
quired for the best quality audio pro-
duction. If CD-R/RWs that have not been
correctly mastered and/or with a maxi-
mum capacity above 650 MB are used,
correct operation is not guaranteed;
❒do not use the protective sleeves sold
for CDs or discs with stabilizers, etc.
because they could get stuck in the in-
ternal mechanism and damage the disc; Care and maintenance
Only clean with a soft, anti-static cloth.
Cleaning and polishing products could
damage the surface.
CDs
Dirt, scratches or any distortions on CDs
could cause problems when playing and
poor sound quality. Follow this advice for
optimum conditions:
❒only use CDs with the following brand;
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 4

INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
14
QUICK
GUIDE
LOUDNESS FUNCTION
The Loudness function improves the vol-
ume of the sound whilst listening at low
volumes, increasing the bass and treble.
To activate/deactivate the function, select
the Loudness setting of the AUDIO menu
using the ¯or ˙button. The function sta-
tus (on or off) is shown on the display for
a few seconds by the words Loudness On
or Loudness Off.
AUDIO DELAY FUNCTION
This function lets you select the the best
acoustics for the front passengers.
To activate the function select the setting
AUDIO DELAY from the AUDIO menu
and using the buttons ¯or ˙select one
of the following settings:
❒ OFF (function off)
❒ Driver Left (optimisation for the front
left passenger)
❒ Driver Right (optimisation for the front
right passenger)
❒ Front (optimised for both front pas-
sengers).PRESET/USER*/
CLASSIC/ROCK/JAZZ
functions (equalizer on/off)
The built-in equalizer can be activated/
deactivated. When the equalizer function
is off, the audio settings can only be
changed by adjusting the bass and treble
settings, whereas when the function is
on, the acoustic curves can be adjusted.
To turn off the equalizer, select the “EQ
Preset” function using the ¯or ˙buttons.
To turn on the equalizer, use the ¯or ˙
buttons to select one of the adjustments:
❒ “FM/AM/CD...EQ User” (adjustment of
7 equalizer bands that can be changed
by the user);
❒“Classic” (optimum predefined adjust-
ment of equalizer for listening to clas-
sical music);
❒“Rock” (optimum predefined adjust-
ment of equalizer for listening to rock
and pop music);
❒“Jazz” (optimum predefined adjustment
of equalizer for listening to jazz music);
When one of the equalizer adjustments is
activated the letters “EQ” light up. FADER ADJUSTMENT
Proceed as follows:
❒ Use button ▲or ▼to set the “Fader”
in the AUDIO menu;
❒ press button ¯to increase the sound
coming from the rear speakers or but-
ton ˙to increase the sound coming
from the front speakers.
By pressing the buttons briefly there is
a gradual change in steps. By pressing them
down longer, the levels will change quickly.
Select “¯0 ˙” to set the same level for
the front and rear audio outputs.
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 14

INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER
16
QUICK
GUIDE
AF SWITCHING function
(alternative frequency search)
The radio can operate in two different
modes in the RDS system:
❒“AF Switching On”: search for alterna-
tive frequencies activated (the letters
“AF” appear on the display);
❒“AF Switching Off”: search for alterna-
tive frequencies not activated.
Proceed as follows to switch the function
on/off:
❒press the MENU button and select
“AF Switching On”;
❒press the ¯/ ˙buttons to turn the
function on/off.
With the function activated, the radio au-
tomatically tunes into the station with the
strongest signal broadcasting the same
program. While driving, you can contin-
ue to listen to the same station without
having to change the frequency when you
change zones.
Obviously, it must be possible to receive
the station that you are listening to in the
area you are driving through.If the AF function is activated, “AF” will
light up on the display.
If the AF function has been activated and
the radio is not able to receive the tuned
station, the radio activates the automatic
search, during which “FM Search” appears
on the display (only for top of the range
radios).
With the AF function deactivated, the re-
maining RDS functions, such as the display
of the station name, still remain active.
The AF function can only be activated on
FM bands.TRAFFIC INFORMATION
function (traffic information)
Some stations on the FM band (FM1, FM2
and FMA) can transmit information about
traffic conditions. In this case the letters
“TA” will appear on the display.
Proceed as follows to switch the TA
function on/off:
❒press the MENU button and select
“Traffic Info”;
❒press the ¯/ ˙buttons to turn
the function on/off.
If the TA function is activated, “TA” will
light up on the display.
IMPORTANT If the TA function is acti-
vated with an audio source other than
Tuner (Radio) (CD, MP3, Telephone or
Mute/Pause), the radio can carry out an
automatic search and therefore it is pos-
sible, when reactivating the Tuner (Radio)
source, that the frequency tuned into will
be different from the one set previously.
With the TA function, it is possible to:
❒search only for RDS stations that
broadcast on the FM band, which are
enabled to transmit traffic information;
❒receive traffic information even if the
CD player is on;
❒receive traffic information at a minimum
preset volume even with the radio vol-
ume zeroed.
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 16

21
INTRODUCTION
FUNCTIONS
AND
ADJUSTMENTS
RADIO
(TUNER)
CD PLAYER
CD MP3
PLAYER QUICK
GUIDE
FREQUENCY BAND
SELECTION
With the Radio mode active, press the
FM or AM button briefly and repeatedly
to select the desired reception band.
Each time the button is pressed the fol-
lowing bands are selected cyclically:
❒pressing the FMas button: “FM1”, “FM2”
or “FMA”;
❒pressing the AM button: “MW”.
Each band is highlighted by the name in the
display. The last station selected on the re-
spective frequency band will be tuned into.
The FM band is divided into sections: FM1,
FM1 or “FMA”; the FMA reception band
is reserved for broadcasters stored auto-
matically using the AutoSTore function.PRESELECTION BUTTONS
The buttons numbered from 1 to 6 are
used to set the following preselections:
❒18 on the FM band FM (6 on FM1, 6 on
FM2, 6 on FMT or “FMA” (on some
versions);
❒12 on the MW band;
To listen to a preset station, select the
desired frequency band and then briefly
press the corresponding preset button
(from 1 to 6).
By pressing the preset button for more
than 2 seconds, the tuned station will be
stored. The storing phase is confirmed by
an acoustic signal. INTRODUCTION
When the radio is turned on the last func-
tion selected before it was switched off is
activated: Radio, CD, CD MP3 or Media
Player (only with Blue&Me™).
To select the Radio function when anoth-
er audio source is being listened to, briefly
press the FMas or AM buttons depending
on the desired band.
Once the Radio mode has been activated,
the display will show the name (RDS sta-
tions only) and the frequency of the se-
lected radio station, the frequency band
selected (e.g. FM1) and the preselect but-
ton number (e.g. P1).
R R
A A
D D
I I
O O

( (
T T
u u
n n
e e
r r
) )
604_39_199 Radio Doblo GB 1ed 17-09-2009 11:51 Pagina 21