2009 DODGE CHALLENGER SRT spare tire

[x] Cancel search: spare tire

Page 70 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual Airbag Warning Light
The light should come on and remain on for six to eight
seconds as a bulb check when the ignition switch is first
turned ON. If the light is not lit during starting, see your
auth

Page 127 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual To Activate
Push and release the ON/OFF button located
on the end of the speed control lever. The
indicator light in the instrument cluster will
illuminate to show that the speed control sys-
tem is o

Page 156 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual remain on if the parking brake is applied or if a brake
fault is detected. If the parking brake is not applied and
the light remains on, or if the light does not turn on, have
the light inspected by a

Page 171 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual 1. Turn the ignition switch ON.
2. Press and hold the COMPASS button for approxi-
mately two seconds.
3. Press the SCROLL button until “Compass Variance”
message and the last variance zone number

Page 246 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual NOTE:
•P (Passenger) - Metric tire sizing is based on U.S.
design standards. P-Metric tires have the letter “P”
molded into the sidewall preceding the size designa-
tion. Example: P215/65R15 95H

Page 247 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual Tire Sizing Chart
TIRE SIZING TERMS
Size Designation:
P= Passenger Car tire size based on U.S. design standards
....blank....= Passenger Car tire based on European design standards
LT= Light Truck t

Page 250 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual Tire Loading and Tire Pressure
Tire Placard Location
NOTE:The proper cold tire inflation pressure is listed
on either the face of the driver’s door or the driver’s side
B-Pillar.
Tire and Loading

Page 259 of 381

DODGE CHALLENGER SRT 2009 3.G Owners Manual These indicators are molded into the bottom of the tread
grooves. They will appear as bands when the tread depth
becomes 1/16 in (2 mm). When the tread is worn to the
tread wear indicators, the tire s
Page:   1-8 9-16 next >