2009 Alfa Romeo MiTo engine

CARE AND MAINTENANCE209
5
ENGINE OIL
Check that the oil level is between the MIN and MAX references
on the dipstick A-fig. 1-2-3-4.
If the oil level is near or even under the MIN line, add oil using
the filler B-fig. 1-2 to reach the MAX line. The oil level should nev-
er exceed the MAX line.
Engine oil consumption
The maximum engine oil consumption is usually 400 grams every
1000 km. During the initial period of use the engine oil consumption
conditions should be considered as having stabilised after the first
5000 - 6000 km.
Don’t add any oil with different characteristics to
those of the existing engine oil.
Used engine oil and the replaced oil filter contain
substances that may be dangerous for the envi-
ronment. We recommend having the oil and oil fil-
ter replaced by an Alfa Romeo Authorised Services.
ENGINE COOLANT
If the level is too low, undo reservoir cap C-fig. 1-2-3-4 and add the
fluid described in chapter 6.
PARAFLU UP antifreeze is used in the engine cool-
ing system. Use fluid of the same type contained
in the cooling system for top-ups. PARAFLU UP may
not be mixed with other types of fluids. If this accidentally
occurs, do not start the engine. Contact an Alfa Romeo
Authorised Services.
The engine cooling system is pressurised. If re-
quired, replace the cap with an original spare part
so as not to compromise system efficiency. Do not
remove the cap from the reservoir when the engine is hot:
risk of burns.
197-220 Alfa MiTo GB 12-11-2008 15:42 Pagina 209

210CARE AND MAINTENANCE
BRAKE FLUID
Check that the fluid is at the maximum level. If the level is too
low undo reservoir cap E-fig. 1-2-3-4 and add the fluid described in
chapter 6.
Prevent brake fluid (which is highly corrosive) from
coming into contact with painted parts. Should that
occur, immediately wash with water.
WINDSCREEN/REARSCREEN/HEADLIGHT
WASHING FLUID
If the level is too low undo reservoir cap D-fig. 1-2-3-4 and add the
fluid described in chapter 6.
Do not travel with the windscreen washing reser-
voir empty: the windscreen washer is fundamen-
tal to improving visibility. Some commercial wind-
screen washer additives are flammable: the engine com-
partment contains hot parts which could start a fire if they
come into contact.
The brake fluid is poisonous and highly corrosive.
In the event of accidental contact, wash the parts
with water and mild soap and rinse with plenty of
water. If swallowed, immediately call a doctor.
The symbol π, on the container indicates a syn-
thetic brake fluid, which is different from a min-
eral fluid. Use of a mineral-based fluid will dam-
age the special rubber seals of the braking system beyond
repair.
197-220 Alfa MiTo GB 12-11-2008 15:42 Pagina 210

CARE AND MAINTENANCE211
5
BATTERY
The battery F-fig. 1-2-3-4 does not require top ups of distilled water
to replenish the electrolyte. A periodic check carried out at an
Alfa Romeo Authorised Services is, however, necessary to check ef-
ficiency.
REPLACING THE BATTERY
When necessary, replace the battery with another original battery
with the same specifications. Follow the battery manufacturer’s in-
structions for maintenance.
ADVICE FOR PROLONGING
THE LIFE OF YOUR BATTERY
To avoid draining your battery and prolong its life, observe the
following indications:
❍when you park the car, ensure the doors, tailgate and bonnet
are closed properly in order to avoid the courtesy lights re-
maining on for longer than necessary;
❍switch off all lights inside the car: the car is, however, equipped
with a system which switches all internal lights off automati-
cally;
❍do not keep accessories (e.g. sound system, hazard lights, etc.)
switched on for a long time when the engine is not running;
❍before performing any operation on the electrical system, dis-
connect the battery negative terminal.
AIR FILTER/POLLEN FILTER/
DIESEL FILTER
Contact an Alfa Romeo Authorised Services to replace these
filters.
197-220 Alfa MiTo GB 12-11-2008 15:42 Pagina 211

218CARE AND MAINTENANCE
IMPORTANT NOTES
Avoid parking under trees; the resin dropped by trees makes the
paintwork go opaque, increasing the possibility of corrosion.
Bird droppings must be washed off immediately and thoroughly as
the acid they contain is particularly aggressive.
Windows
Use specific detergents and clean cloths to prevent scratching.
Front headlights
Use a soft, damp cloth soaked in water and detergent for wash-
ing cars
IMPORTANT Do not use solvents: this may cause the lens to be-
come opaque.
IMPORTANT When cleaning the car with a pressure washer, keep
the water jet at least 2 cm away from the headlights.
Engine compartment
At the end of the winter the engine compartment should be care-
fully washed, without directing the jet against electronic control
units. Have this operation performed at a specialised workshop.
IMPORTANT Perform this operation on a cold engine and with the
key removed from the ignition.
Detergents cause water pollution. The car should
be washed in areas equipped for collecting and pu-
rifying the liquid used in the washing process.
When drying take care to dry the least exposed parts where the
water could collect most easily. Do not wash the car after it has
been parked in the sun or when the engine is bonnet is hot: this
could take the shine off the paint.
Exterior plastic parts must be cleaned in the same way as the rest
of the car.
197-220 Alfa MiTo GB 12-11-2008 15:42 Pagina 218

TECHNICAL DATA221
6
Identification data .................................................................... 222
Engine codes - bodywork versions............................................... 224
Engine................................................................................... 225
Fuel system ............................................................................ 227
Transmission ........................................................................... 227
Brakes.................................................................................... 228
Suspension............................................................................. 228
Steering................................................................................. 228
Wheels.................................................................................. 229
Dimensions............................................................................. 233
Performance ........................................................................... 234
Weights ................................................................................. 235
Consumables.......................................................................... 236
Fluids and lubricants ................................................................. 237
Fuel consumption .................................................................... 239
CO
2emissions......................................................................... 240
221-240 Alfa MiTo GB 12-11-2008 15:43 Pagina 221

222TECHNICAL DATA
IDENTIFICATION DATA
The vehicle identification details are:
❍Identification plate (located in the engine compartment, next
to the upper attachment for the right-hand shock absorber);
❍Bodywork marking (located on the passenger compartment
floor panel, next to the front passenger seat);
❍Body paintwork identification label (located on the inside of
the tailgate);
❍Engine marking (located in the rear left-hand part, gearbox-
side).
IDENTIFICATION PLATE fig. 1
This plate is applied to the engine compartment front beam and
shows the following identification data:
A. Space reserved for national type approval
B. Space for stamped chassis number
C. Free space for maximum permitted weight data required by
various national laws
D. Space for version information and any additional information
E. Space for fume coefficient (only for diesel versions)
F. Space for punching manufacturer’s name.
fig. 1A0J0000m
221-240 Alfa MiTo GB 12-11-2008 15:43 Pagina 222

TECHNICAL DATA223
6
CHASSIS MARKING fig. 3
This is printed on the passenger compartment floor panel near
the front right seat. Move flap A forwards to access it.
The chassis marking includes:
❍vehicle type (ZAR 955000);
❍chassis number.
BODYWORK PAINT IDENTIFICATION PLATE
fig. 3
This plate is applied inside the bonnet and shows the following data:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Respray and touch up code.
ENGINE MARKING
The engine marking is stamped on the cylinder block and includes
the model and the chassis number.
fig. 2A0J0140mfig. 3A0J0138m
221-240 Alfa MiTo GB 12-11-2008 15:43 Pagina 223

224TECHNICAL DATA
(*) Only for versions/markets where applicable
(**) Euro 5 versions
(
) 4 seater version
(
) 5 seater version
ENGINE CODES - BODYWORK VERSIONS
955A1000
198A4000
198A1000
199A8000
199A3000
955A4000
955A3000955AXB1B 01 ()
955AXB1B 01B ()
955AXB1B 01C () (**)
955AXB1B 01D () (**)
955AXG1A 06 (
)
955AXG1A 06B ()
955AXD1B 03C (
) (**)
955AXD1B 03D (
) (**)
955AXA1B 00 (
)
955AXA1B 00B ()
955AXA1B 00C () (**)
955AXA1B 00D () (**)
955AXH1B 07 (
)
955AXH1B 07B ()
955AXE1B 04C (
) (**)
955AXHE1B 04D () (**)
955AXC1B 02 (
)
955AXC1B 02B ()
955AXC1B 02C () (**)
955AXC1B 02D () (**)
Engine code Bodywork version
1.4 Petrol 78HP (*)
1.4 Turbo Petrol 120HP
1.4 Turbo Petrol 150HP (*)
1.4 Turbo Petrol 155HP
1.3 JTDM
1.6 JTDM115HP (*)
1.6 JTDM120HP
221-240 Alfa MiTo GB 12-11-2008 15:43 Pagina 224