Also check the combined f use box in
the under-hood f use box.
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine f rom the chart on pages
, and , or the diagram on
thefuseboxlidorthefuselabel,
which f use or f uses control that
component. Check those f uses f irst,
but check all the f uses bef ore
deciding that a blown f use is not the
cause. Replace any blown f uses and
check if the device works.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are of f . Check each of the large f uses in
the under-hood f use box by
looking at the wire inside.
Removing these f uses requires a
Phillips-head screwdriver. Remove the cover f rom the f use
box.
Models equipped with the keyless
access system have an engine
start/stop button instead of an
ignition switch. VEHICLE OFF
(LOCK) Mode is the equivalent of
LOCK (0). See page for
ignition switch and power mode
comparison. 3.
1.
2.
603 604 605
180
Checking and Replacing Fuses
Fuses
600
FUSE
BLOWN BLOWN
— —y
y
) y y
2009 TL
µ
Thediagramsinthissectiongive
you the dimensions and capacities of
your vehicle and the locations of the
identif ication numbers. It also
includes inf ormation you should
know about your vehicle’s tires and
emissions control systems. ................
Identif ication Numbers .612
................................
Specif ications .614
DOT Tire Quality Grading ..........................
(U.S. Vehicles) .617
.................................
Tire Labeling .619
Tire Pressure Monitoring System (TPMS) Required Federal ............................
Explanation .621
.......................
Emissions Controls .623
..
Three Way Catalytic Converter .625
........................
Emissions Testing .626
T echnical Inf ormation
Technical Inf ormation
611
\f—\f—y
y
) \f\fy\f
y
2009 TL
